Plasticity in fretting contact
DOI10.1016/S0022-5096(99)00103-9zbMATH Open0996.74054WikidataQ127725557 ScholiaQ127725557MaRDI QIDQ1584906FDOQ1584906
Authors: J. M. Ambrico, Matthew Begley 
Publication date: 31 October 2002
Published in: Journal of the Mechanics and Physics of Solids (Search for Journal in Brave)
Recommendations
- Evaluation of cyclic inelastic response in fretting based on unified Chaboche model
- Plasticity in polycrystalline fretting fatigue contacts
- Analysis of the elastic punch-substrate contact under fretting: monotonic and cyclic loading of the punch
- The evolution of the process zone when a complete contact is subject to cyclically varying loads.
- Crystallographic plasticity in fretting of Ti--6AL--4V.
finite element methodplane straincyclic plasticityratchetingCoulomb friction lawshakedownconstant normal loadcyclic tangential loadflat elastic-plastic surfacefretting contact
Contact in solid mechanics (74M15) Finite element methods applied to problems in solid mechanics (74S05) Small-strain, rate-independent theories of plasticity (including rigid-plastic and elasto-plastic materials) (74C05)
Cites Work
- Contact Mechanics
- Contact of dissimilar elastic cylinders under normal and tangential loading
- Mechanics of fretting fatique
- Adhesion, slip, cohesive zones and energy fluxes for elastic spheres in contact
- Plasticity in fretting contact
- Application of the kinematical shakedown theorem to rolling and sliding point contacts
- Three-Dimensional Finite Element Analysis of Surface Deformation and Stresses in an Elastic-Plastic Layered Medium Subjected to Indentation and Sliding Contact Loading
- Three-Dimensional Finite Element Analysis of Subsurface Stresses and Shakedown Due to Repeated Sliding on a Layered Medium
Cited In (11)
- Elasto-plastic finite element analysis of fretting stresses in pre-stressed strip in contact with cylindrical pad.
- Plasticity in polycrystalline fretting fatigue contacts
- Evaluation of cyclic inelastic response in fretting based on unified Chaboche model
- Plasticity in fretting contact
- Title not available (Why is that?)
- Analysis of the elastic punch-substrate contact under fretting: monotonic and cyclic loading of the punch
- An optimal control approach to the analysis of inelastic structures under cyclic loading
- Evaluation of fretting wear based on the frictional work and cyclic saturation concepts
- Numerical study of sliding wear caused by a loaded pin on a rotating disc
- Effects of microstructure variability on intrinsic fatigue resistance of nickel-base superalloys - a computational micromechanics approach
- Crystallographic plasticity in fretting of Ti--6AL--4V.
Uses Software
This page was built for publication: Plasticity in fretting contact
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1584906)
