The following pages link to (Q2753250):
Displaying 50 items.
- Perturbation approaches of a planar crack in linear elastic fracture mechanics: a review (Q361285) (← links)
- Dwell fatigue crack nucleation model based on crystal plasticity finite element simulations of polycrystalline titanium alloys (Q361509) (← links)
- A thermomechanical fracture modeling and simulation for functionally graded solids using a residual-strain formulation (Q373286) (← links)
- Computational modeling of mixed-mode fatigue crack growth using extended finite element methods (Q373331) (← links)
- Fatigue crack growth simulations of interfacial cracks in bi-layered fgms using XFEM (Q386319) (← links)
- An isogeometrical approach to error estimation and stress recovery (Q388409) (← links)
- Effects of the strain-hardening exponent on two-parameter characterizations of surface-cracks under large-scale yielding (Q414329) (← links)
- A peridynamic formulation for transient heat conduction in bodies with evolving discontinuities (Q419644) (← links)
- On the plastic anisotropy of an aluminium alloy and its influence on constrained multiaxial flow (Q422797) (← links)
- Analytical investigations and fuzzy logic-based modeling of the impact resistance of aluminum-epoxy laminated composites (Q424988) (← links)
- Extended finite element method with edge-based strain smoothing (ESm-XFEM) for linear elastic crack growth (Q438099) (← links)
- Non-ordinary state-based peridynamic analysis of stationary crack problems (Q459099) (← links)
- Fully enriched weight functions in mesh-free methods for the analysis of linear elastic fracture mechanics problems (Q463475) (← links)
- An efficient adaptive analysis procedure for node-based smoothed point interpolation method (NS-PIM) (Q545990) (← links)
- Experimental and numerical investigation of a cracked transversely graded plate subjected to in plane bending (Q546732) (← links)
- Mode I fracture of sheet metal (Q597740) (← links)
- Determination of the effective mode-I toughness of a sinusoidal interface between two elastic solids (Q604305) (← links)
- Cracking analysis of fracture mechanics by the finite element method of lines (FEMOL) (Q608660) (← links)
- \(J\)-integral resistance curve testing and evaluation (Q621425) (← links)
- Variational formulation and nonsmooth optimization algorithms in elastodynamic contact problems for cracked body (Q646252) (← links)
- Hybrid high dimensional model representation for reliability analysis (Q658170) (← links)
- Design of maintenance schedules for fatigue-prone metallic components using reliability-based optimization (Q658843) (← links)
- Transient analysis of the dynamic stress intensity factors using SGBEM for frequency-domain elastodynamics (Q658929) (← links)
- Crack tip opening displacement of a dugdale crack in a three-phase cylindrical model composite material (Q660522) (← links)
- Modeling of crack growth through particulate clusters in brittle matrix by symmetric-Galerkin boundary element method (Q712380) (← links)
- Numerical simulation of growth pattern of a fluid-filled subsurface crack under moving hertzian loading (Q712438) (← links)
- \(J\)-integral and crack driving force in elastic-plastic materials (Q731118) (← links)
- Extended finite element method for fretting fatigue crack propagation (Q835938) (← links)
- From rate-dependent to rate-independent brittle crack propagation (Q849265) (← links)
- Damage dynamics, rate laws, and failure statistics via Hamilton's principle (Q890403) (← links)
- Characterizing the fracture parameters of a graphene sheet using atomistic simulation and continuum mechanics (Q960781) (← links)
- Dilute-crack approximations for damage and fracture in disordered structures (Q978753) (← links)
- Large plastic deformations accompanying the growth of an elliptical hole in a thin plate (Q982235) (← links)
- Plane-strain crack problems in microstructured solids governed by dipolar gradient elasticity (Q989023) (← links)
- Continuum damage mechanics: Combining thermodynamics with a thoughtful characterization of the microstructure (Q1002750) (← links)
- Goal-oriented error estimates based on different FE-spaces for the primal and the dual problem with applications to fracture mechanics (Q1015594) (← links)
- On energy changes due to the formation of a circular hole in an elastic plate (Q1020275) (← links)
- Crack growth resistance of shape memory alloys by means of a cohesive zone model (Q1027092) (← links)
- Effect of blow-holes on reliability of cast component (Q1039991) (← links)
- Investigation of a hydraulic impact: a technology in rock breaking (Q1041477) (← links)
- Fatigue crack growth under variable-amplitude loading. I: Model formulation in state-space setting (Q1347901) (← links)
- An adaptive procedure based on background cells for meshless methods (Q1348317) (← links)
- Life-extending control of fossil fuel power plants (Q1362430) (← links)
- Recent advances in the alternating method for elastic and inelastic fracture analyses (Q1365612) (← links)
- T-stress, mixed-mode stress intensity factors, and crack initiation angles in functionally graded materials: A unified approach using the interaction integral method. (Q1402574) (← links)
- Interface element method: treatment of non-matching nodes at the ends of interfaces between partitioned domains. (Q1415772) (← links)
- A domain-independent integral expression for the crack extension force of a curved crack in three dimensions. (Q1598280) (← links)
- Fatigue crack growth simulations of homogeneous and bi-material interfacial cracks using element free Galerkin method (Q1630779) (← links)
- Isogeometric shape design sensitivity analysis of stress intensity factors for curved crack problems (Q1668420) (← links)
- Determination of stress intensity factor with direct stress approach using finite element analysis (Q1695573) (← links)
