Stochastic Frontier Analysis
This book is concerned with the development of a modified econometric approach to the estimation of production, cost and profit frontiers, and the estimation of the technical and economic efficiency with which producers approach these frontiers. Traditional textbook presentations of production economics, from Samuelson's ``Foundations of Economic Analysis to the present day, treat producers as successful optimizers. They produce maximum outputs allowable by the technology, they minimize the cost of producing, they maximize profit. Econometric practice, beginning with the pioneering work of \textit{C. Cobb} and \textit{P.H. Douglas} [A theory of Production. Am. Econ. Rev., Suppl. 18, 139-165 (1928)], has followed this theoretical paradigm. The least squares based regression techniques were used to estimate the parameters of production, cost, and profit functions. In these techniques the error terms were assumed to be symmetrically distributed with zero means. The only source of deviation from the estimated function was assumed to be statistical noise. However, not all producers are always so successful in solving their optimization problems. Consequently not all producers succeed in minimizing the expenditure required to produce the outputs. For this reason it is desirable to move the analysis of production, cost, and profit from the traditional functions toward frontiers. Thus a production frontier characterizes the minimum input bundles required to produce various outputs, or the maximum output with various input bundles. Producers operating on their production frontier are technically efficient, and producers operating beneath their production frontier are technically inefficient. The econometric implication of the proposed reformulation from functions to frontiers is that symmetrically distributed error terms with zero means are not appropriate when analyzing producer behavior. Consequently, error terms associated with frontiers are composed of a traditional symmetric random-noise component and a new one-sided inefficiency component. These composed error terms cannot be symmetric and they cannot have zero means. They must be skewed (negatively in the case of production, revenue, and profit frontiers and positively in the case of cost frontiers), and they must have nonzero means (negative in the case of production, revenue, and profit frontiers and positive in the case of cost frontiers). The authors description of the Chapters of the book is the following: Chapter 2 is devoted to the analytical foundations of producer theory and efficiency measurement. In Section 2.2 we characterize production technology with production frontiers in the single-output case and with distance functions in the multiple-output case. We also characterize technology with dual cost, revenue, and profit frontiers, which provide increasingly exacting standards against which to measure producer performance. In Section 2.3 we define producer performance in terms of technical efficiency, and we measure technical efficiency with distance functions. In Section 2.4 we define producer performance in terms of economic (cost, revenue, and profit) efficiency, and we measure economic efficiency relative to cost, revenue, and profit frontiers. We also show how to decompose each type of economic efficiency into technical and allocative components. Chapter 3 is concerned with the estimation of technical efficiency. In Section 3.2 we develop and show how to estimate cross-sectional production frontier models, both deterministic and stochastic, although most of our effort is directed toward stochastic production frontiers. In Section 3.3 we develop and show how to estimate panel data production frontier models, where technical efficiency is initially time invariant and then is allowed to vary through time. In Section 3.4 we discuss the problem of heteroskedasticity in stochastic production frontier models. Chapter 4 is concerned with the estimation and decomposition of cost efficiency. In Section 4.2 we develop and show how to estimate cross- sectional stochastic cost frontier models, in both single-equation and simultaneous-equation settings. In Section 4.3 we develop and show how to estimate panel data stochastic cost frontier models, again in single-equation and simultaneous-equation settings. In Section 4.4 we discuss a pair of novel approaches to the estimation of cost efficiency. Chapter 5 is concerned with the estimation and decomposition of profit efficiency. In Section 5.2 we develop and show how to estimate single-output stochastic profit frontier models, using both primal and dual approaches. In Section 5.3 we develop and show how to estimate multiple-output stochastic profit frontier models, again using both primal and dual approaches. We pay little attention to the distinction between cross-sectional and panel data models, since the various estimation techniques developed in Chapters 3 and 4 apply equally well to the estimation of stochastic profit frontiers. In Chapters 3-5 inefficiency is modeled by introducing additional error components and assigning distributions to them. Inefficiencies are then estimated as functions of the parameters of these distributions. In Chapter 6 we take a very different approach, in which both technical and allocative inefficiencies are modeled parametrically, on the assumption that producers optimize with respect to shadow prices, which are parametrically related to actual prices. In Section 6.2 we develop and show how to estimate and decompose both cost and profit efficiency in a cross-sectional setting. In Section 6.3 we do the same thing in a panel data setting. This parametric approach has some advantages, and some disadvantages, relative to the error component approach developed in Chapters 3-5. Estimation of efficiency is the first of two tasks. The second task is to explain variation in estimated efficiency. In Chapter 7 we discuss alternative approaches to the explanation of variation in efficiency. In Section 7.2 we discuss some early approaches to explanation, and we find these approaches wanting. In Section 7.3 we discuss a variety of recent approaches to explanation, which we find superior to the early approaches. Essentially these recent approaches achieve explanation by making the one-sided inefficiency error component a function of the explanatory variables. If efficiency varies, either across producers or through time, its variation constitutes a source of producer performance variation. One measure of performance is productivity change, and so if efficiency changes through time, it makes a contribution to productivity change. Chapter 8 concludes the book by incorporating efficiency change into models of productivity change, which heretofore have tended to neglect the contribution of efficiency change. In Section 8.2 we develop a primal approach, based on a stochastic production frontier, to the estimation and decomposition of productivity change. In Sections 8.3 and 8.4 we develop a pair of dual approaches, based on stochastic cost and profit frontiers, to the estimation and decomposition of productivity change. At least four topics are missing from the book. First, we do not discuss the estimation and decomposition of revenue efficiency relative to stochastic revenue frontiers. Second, we do not explore the efficiency with which producers pursue nonconventional objectives. The third and fourth omissions are perhaps more serious. We do not discuss the Bayesian approach to stochastic frontier analysis, and we do not discuss semiparametric approaches to stochastic frontier analysis. Our reason for omitting these two topics is that the two literatures are small and not yet influential.
- scientific article; zbMATH DE number 7012562
- Dependence modeling in stochastic frontier analysis
- Sensitivity analysis of stochastic frontier analysis models
- A microfoundation for stochastic frontier analysis
- Stochastic frontier analysis with fat-tailed error models
- Quantile Methods for Stochastic Frontier Analysis
- A Laplace stochastic frontier model
- Stochastic frontier models. A Bayesian perspective
- The Lechatelier principle in a DEA model
- Algorithms for bounded-influence estimation
- Testing procedures for detection of linear dependencies in efficiency models
- Assessing productivity change with SFA in the sheep sector of Greece
- Evolution of bank efficiency in Brazil: a DEA approach
- Group-specific stochastic production frontier models with parametric specifications
- Quantile regression for robust bank efficiency score estimation
- The specification of technical and allocative inefficiency in stochastic production and profit frontiers
- Generalized stochastic frontier production models
- Econometric efficiency analysis: A policy-oriented review
- Stochastic production frontiers and panel data: A latent variable framework
- Formulation and estimation of stochastic frontier production function models
- Technological inefficiency and the skewness of the error component in stochastic frontier analysis
- Likelihood computation in the normal-gamma stochastic frontier model
- Consistent inference in fixed-effects stochastic frontier models
- A microfoundation for stochastic frontier analysis
- Intercept homogeneity test for fixed effect models under cross-sectional dependence: some insights
- A note on the likelihood ratio test on the equality of group frontiers
- New insights into the stochastic ray production frontier
- Using stochastic frontier analysis to measure the impact of weather on the efficiency of electricity distribution businesses in developing economies
- On the estimation of total factor productivity: a novel Bayesian non-parametric approach
- Semiparametric stochastic frontier models: a generalized additive model approach
- Microfoundations for stochastic frontiers
- Integration, productivity and technological spillovers: evidence for eurozone banking industries
- Statistical inference in efficient production with bad inputs and outputs using latent prices and optimal directions
- Endogenous bank risk and efficiency
- A novel model of costly technical efficiency
- Bayesian local influence analysis: with an application to stochastic frontiers
- The effect of the normalisation of the shadow price vector on the cost function estimation.
- Network DEA: efficiency analysis of organizations with complex internal structure
- Estimating output targets to evaluate output-specific efficiencies: A statistical framework
- A Monte Carlo study of old and new frontier methods for efficiency measurement
- On the equivalence of two normalizations in estimating shadow cost functions
- Additive decomposition of profit efficiency
- Measuring profit efficiency with McFadden's gauge function
- Estimation of growth convergence using a stochastic production frontier approach
- On the estimation of technical and allocative efficiency in a panel stochastic production frontier system model: some new formulations and generalizations
- Stochastic frontier models with time-varying conditional variances
- Sensitivity analysis of stochastic frontier analysis models
- Comparison of stochastic frontier models using the Hyvärinen factor
- Performance estimation when the distribution of inefficiency is unknown
- On random sets for inference in statistics and econometrics
- Cross-sectional stochastic frontier parameter estimator using Kulback-Leibler divergence
- On identifying risk-adjusted efficiency gains or losses of prospective mergers and acquisitions
- How effective are we: towards a more convincing stochastic frontier analysis
- Dependence modeling in stochastic frontier analysis
- Clustering and meta-envelopment in data envelopment analysis
- Advances in efficiency and productivity II
- Spatial scale and product mix economies in U.S. banking with simultaneous spillover regimes
- Measurement of technical inefficiency and total factor productivity growth: a semiparametric stochastic input distance frontier approach and the case of Lithuanian dairy farms
- Advances in efficiency and productivity. Papers based on the presentations at the international workshop on efficiency and productivity, Alicante, Spain, June 12--13, 2015
- Inference in stochastic frontier analysis with dependent error terms
- WITHDRAWN: ``Inference in stochastic frontier analysis with dependent error terms
- A trivariate Gaussian copula stochastic frontier model with sample selection
- Optimal combinations of stochastic frontier and data envelopment analysis models
- Cost functions are nonconvex in the outputs when the technology is nonconvex: convexification is not harmless
- A new multicriteria approach for the analysis of efficiency in the Spanish olive oil sector by modelling decision maker preferences
- Expected utility theory and prospect theory: One wedding and a decent funeral
- A new stochastic frontier model with cross-sectional effects in both noise and inefficiency terms
- Quantile stochastic frontiers
- Modelling regional patterns of inefficiency: a Bayesian approach to geoadditive panel stochastic frontier analysis with an application to cereal production in England and Wales
- Endogenous dynamic efficiency in the intertemporal optimization models of firm behavior
- Efficiency analysis by production frontiers. The nonparametric approach
- Effects of heterogeneity on bank efficiency scores
- A robust nonparametric approach to evaluate and explain the performance of mutual funds
- Derivation of marginal effects of determinants of technical inefficiency
- Semiparametric smooth-coefficient stochastic frontier model
- Different approaches to efficiency analysis. An application to the Spanish Trawl fleet operating in Moroccan waters
- Bayesian and non-Bayesian analysis of gamma stochastic frontier models by Markov chain Monte Carlo methods
- A stochastic production frontier model with group-specific temporal variation in technical efficiency
- A \(\Gamma\)-moment approach to monotonic boundary estimation
- Are banks affiliated with bank holding companies more efficient than independent banks? the recent experience regarding Japanese regional bHCs
- Test for randomness of the technology parameter in a stochastic frontier regression model
- Reconsidering heterogeneity in panel data estimators of the stochastic frontier model
- Panel estimators and the identification of firm-specific efficiency levels in parametric, semiparametric and nonparametric settings
- Measuring technical and allocative inefficiency in the translog cost system: a Bayesian approach
- Estimating variable returns to scale production frontiers with alternative stochastic assumptions
- Characteristics of a polluting technology: theory and practice
- Primal and dual dynamic Luenberger productivity indicators
- Using information about technologies, markets and firm behaviour to decompose a proper productivity index
- Unobserved heterogeneity and endogeneity in nonparametric frontier estimation
- Technical and allocative efficiency in European banking
- Asymmetric dependence in the stochastic frontier model using skew normal copula
- A multi-output multi-input stochastic frontier system with input- and output-specific inefficiency
- The role of a nation's culture in the country's governance: stochastic frontier analysis
- Maximum likelihood estimation of stochastic frontier models with endogeneity
- Estimation of stochastic frontier production functions with input-oriented technical efficiency
- Incentive regulation and the change in productive efficiency in telecommunications in the United States
- Pitfalls in the estimation of a cost function that ignores allocative inefficiency: a Monte Carlo analysis
- Estimation of technical and allocative inefficiency: a primal system approach
- Non-parametric tests of productive efficiency with errors-in-variables
- Nonparametric stochastic frontiers: a local maximum likelihood approach
- Semiparametric maximum likelihood estimation of stochastic frontier model with errors-in-variables
- The efficiency of top agents: an analysis through service strategy in tennis
- Markov switching stochastic frontier model
- Rank test for testing randomness of the technology parameters in a stochastic frontier regression model
- Efficiency and effectiveness in the urban public transport sector: a critical review with directions for future research
- Notes on technical efficiency estimation with multiple inputs and outputs
- Parameters measuring bank risk and their estimation
- Applied cost allocation: the DEA-Aumann-Shapley approach
This page was built for publication: Stochastic Frontier Analysis
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4507503)