A 3D Cosserat point element (CPE) for nonlinear orthotropic solids: Generalization for an initially distorted mesh and an arbitrary orientation of material orthotropy
From MaRDI portal
Publication:2952873
DOI10.1002/NME.5000zbMath1352.74046OpenAlexW1932459844MaRDI QIDQ2952873
Publication date: 30 December 2016
Published in: International Journal for Numerical Methods in Engineering (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1002/nme.5000
hyperelasticityCosserat point elementfinite element technologydistorted elementsnonlinear orthotropic solid
Nonlinear elasticity (74B20) Finite element methods applied to problems in solid mechanics (74S05) Finite element, Rayleigh-Ritz and Galerkin methods for boundary value problems involving PDEs (65N30)
Related Items (4)
A solid-shell Cosserat point element (SSCPE) for elastic thin structures at finite deformation ⋮ Extension of the unsymmetric 8‐node hexahedral solid element <scp>US‐ATFH8</scp> to <scp>3D</scp> hyper‐elastic finite deformation analysis ⋮ The Cosserat Point Element as an Accurate and Robust Finite Element Formulation for Implicit Dynamic Simulations ⋮ A solid-shell formulation based on the assumed natural inhomogeneous strains for modeling the viscoelastic response of electro-active polymers
Uses Software
Cites Work
- Cosserat point element \((CPE)\) for finite deformation of orthotropic elastic materials
- Further developments of physically based invariants for nonlinear elastic orthotropic solids
- Analyses of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm: Applications
- Analysis of thin shells using anisotropic polyconvex energy densities
- An improved EAS brick element for finite deformation
- Hyperelasticity and physical shear buckling of a block predicted by the Cosserat point element compared with inelasticity and hourglassing predicted by other element formulations
- An improved 3-D brick Cosserat point element for irregular shaped elements
- On some mixed finite element methods for plane membrane problems
- Assumed strain stabilization of the 4-node quadrilateral with 1-point quadrature for nonlinear problems
- Formulation of a membrane finite element with drilling degrees of freedom
- Shear deformation models for large-strain shell analysis
- A multiple-quadrature eight-mode hexahedral finite element for large deformation elastoplastic analysis
- On enhanced strain methods for small and finite deformations of solids
- A note on enhanced strain methods for large deformations
- The finite element patch test revisited. A computer test for convergence, validation and error estimates
- A new 3-D finite element for nonlinear elasticity using the theory of a Cosserat point.
- Four-noded mixed finite elements, using unsymmetric stresses, for linear analysis of membranes
- A theory and finite element formulation of shells at finite deformations involving thickness change: Circumventing the use of a rotation tensor
- On numerically accurate finite element solutions in the fully plastic range
- Enhanced lower-order element formulations for large strains
- Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems
- Families of 4-node and 9-node finite elements for a finite deformation shell theory. An assessment of hybrid stress, hybrid strain and enhanced strain elements
- Assumed strain stabilization of the eight node hexahedral element
- Physically based invariants for nonlinear elastic orthotropic solids
- On a physically stabilized one point finite element formulation for three-dimensional finite elasto-plasticity
- Response of a nonlinear elastic general Cosserat brick element in simulations typically exhibiting locking and hourglassing
- On a variational theorem for incompressible and nearly-incompressible orthotropic elasticity
- On the formulation of enhanced strain finite elements in finite deformations
- Rational approach for assumed stress finite elements
- Applied Soil Mechanics
- A finite deformation brick element with inhomogeneous mode enhancement
- On the Theory of a Cosserat Point and Its Application to the Numerical Solution of Continuum Problems
- On the Numerical Solution of One-Dimensional Continuum Problems Using the Theory of a Cosserat Point
- The patch test—a condition for assessing FEM convergence
- A finite element formulation for nonlinear incompressible elastic and inelastic analysis
- A uniform strain hexahedron and quadrilateral with orthogonal hourglass control
- Alternative ways for formulation of hybrid stress elements
- A new formulation of hybrid/mixed finite element
- Geometrically non-linear enhanced strain mixed methods and the method of incompatible modes
- A non-conforming element for stress analysis
- A new stabilization technique for finite elements in non-linear elasticity
- A geometrical non-linear brick element based on the EAS-method
- Analysis of 3D problems using a new enhanced strain hexahedral element
- A stabilization technique to avoid hourglassing in finite elasticity
- A highly efficient enhanced assumed strain physically stabilized hexahedral element
- On the performance of enhanced strain finite elements in large strain deformations of elastic shells
- A new volumetric and shear locking‐free 3D enhanced strain element
- Remarks on the stability of enhanced strain elements in finite elasticity and elastoplasticity
- A class of mixed assumed strain methods and the method of incompatible modes
- EAS‐elements for two‐dimensional, three‐dimensional, plate and shell structures and their equivalence to HR‐elements
- Cosserat theories: Shells, rods and points
This page was built for publication: A 3D Cosserat point element (CPE) for nonlinear orthotropic solids: Generalization for an initially distorted mesh and an arbitrary orientation of material orthotropy
