Strength or toughness? A criterion for crack onset at a notch
From MaRDI portal
(Redirected from Publication:1613136)
Recommendations
- A criterion for crack nucleation at a notch in homogeneous materials
- scientific article; zbMATH DE number 2167578
- Investigation of failure criteria for a sharp notch
- Initiation of cracks in Griffith's theory: an argument of continuity in favor of global minimization
- Comparison of criteria on the direction of crack extension
Cites work
- scientific article; zbMATH DE number 4057115 (Why is no real title available?)
- scientific article; zbMATH DE number 4110279 (Why is no real title available?)
- scientific article; zbMATH DE number 1500785 (Why is no real title available?)
- scientific article; zbMATH DE number 1547530 (Why is no real title available?)
- scientific article; zbMATH DE number 2114821 (Why is no real title available?)
- A comparative analysis of several nonlocal fracture criteria
- Cohesive zone modeling of crack nucleation at bimaterial corners
- Crack Initiation From Homogeneous and Bimaterial Corners
- Fracture initiation at sharp notches: Correlation using critical stress intensities
- Interface debonding ahead of a primary crack
- Mode III near and far fields for a crack lying in or along a joint
- Revisiting brittle fracture as an energy minimization problem
Cited in
(65)- A meshless analysis of mode I fracture propagation in adhesive joints with experimental validation
- Coupled versus energetic nonlocal failure criteria: a case study on the crack onset from circular holes under biaxial loadings
- Numerical simulation of progressive debonding in fiber reinforced composite under transverse loading
- Non-local criteria for the borehole problem: gradient elasticity versus finite fracture mechanics
- Singularity analysis and fracture energy-release rate for composites: Piecewise homogeneous-anisotropic materials
- Towards validation of crack nucleation criteria from V-notches in quasi-brittle metallic alloys: energetics or strength?
- On the assessment of cracks within the interface of thin layers on a substrate
- Open Circular Hole in a Finite Plate Under Tension Treated by Airy Stress Function Method
- Static and fatigue failure of quasi-brittle materials at a V-notch using a Dugdale model
- Quasibritle fracture of smooth shafts under torsion
- A criterion for crack nucleation at a notch in homogeneous materials
- Visco-energetic solutions to one-dimensional rate-independent problems
- Construction of quasi-brittle and quasi-ductile fracture diagrams based on necessary and sufficient criteria
- Fracture toughness from the standpoint of softening hyperelasticity
- Nonlocal criterion of bridged cracks growth: analytical analysis
- A mixed interface finite element for cohesive zone models
- Analysis of stress singularity in adhesive joints using meshless methods
- Debonding at the fibre-matrix interface under remote transverse tension. One debond or two symmetric debonds?
- Application of the coupled stress-energy criterion to predict the fracture behaviour of layered ceramics designed with internal compressive stresses
- Goal-oriented a posteriori error estimates in linear elastic fracture mechanics
- Mixed mode failure criteria for brittle elastic V-notched structures
- Multi-cracking in brittle thin layers and coatings using a FFM model
- Interface crack onset at a circular cylindrical inclusion under a remote transverse tension. Application of a coupled stress and energy criterion
- Quasistatic adhesive contact of visco‐elastic bodies and its numerical treatment for very small viscosity
- Competition between deflection and penetration at an interface in the vicinity of a main crack
- Numerical investigation of the effects of fracturing fluid parameters on hydraulic fracture propagation in jointed rock mass based on peridynamics
- A discussion of fracture mechanisms in heterogeneous materials by means of configurational forces in a phase field fracture model
- Failure initiation in an epoxy joint between two steel plates
- Prediction of net-tension failure of multi-bolt composite joints: a fast approach for laminates with arbitrary layup
- Experimental characterization and numerical modeling of crack initiation in rhombus hole PMMA specimens under compression
- Maximally-dissipative local solutions to rate-independent systems and application to damage and delamination problems
- Crack deflection in a biaxial stress state
- Phase-field modelling of cohesive fracture
- Dynamic crack initiation assessment with the coupled criterion
- Computation of V-notch shape factors in four-point bend specimen for fracture tests on brittle materials
- Toward toughness improvement of foam core sandwich panel inserts through an energy approach
- Failure initiation at a blunt V-notch tip under mixed mode loading
- Investigation of failure criteria for a sharp notch
- Evaluation of multiple stress singularity orders of a V-notch by the boundary element method
- Analysis of a model of field crack mechanics for brittle materials
- \(T\)-stress effects on crack deflection: straight vs. curved crack advance
- Strength-induced peridynamic modeling and simulation of fractures in brittle materials
- Two-dimensional fracture mechanics problems for solids with sharp and rounded V-notches
- Limit curves for brittle fracture in key-hole notches under mixed mode I/III loading based on stress-based criteria
- New quantized failure criteria: application to nanotubes and nanowires
- Asymptotic results for slipping complete frictional contacts
- The problem of the critical angle for edge and center V-notched structures
- Thermodynamics and analysis of rate-independent adhesive contact at small strains
- The effect of surface stresses on the critical debonding stress around nanoparticles
- Fracture analysis of V-notched components - effects of first non-singular stress term
- Quasistatic delamination problem
- A 3-D failure initiation criterion from a sharp V-notch edge in elastic brittle structures
- The effects of different boundary conditions on three-dimensional cracked discs under anti-plane loading
- On the most dangerous V-notch
- Determination of mode II fracture toughness for U-shaped notches using Brazilian disc specimen
- Local-solution approach to quasistatic rate-independent mixed-mode delamination
- Interrelation between toughness and both strength and structural parameters of material
- A failure criterion for brittle elastic materials under mixed-mode loading
- An implicit gradient type of static failure criterion for mixed-mode loading
- Failure criteria for linear elastic materials with U-notches
- A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates
- Stress-driven local-solution approach to quasistatic brittle delamination
- Multiple failures in or around a stiff inclusion embedded in a soft matrix under a compressive loading
- Brittle failures at rounded V-notches: a finite fracture mechanics approach
- Models of dynamic damage and phase-field fracture, and their various time discretisations
This page was built for publication: Strength or toughness? A criterion for crack onset at a notch
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1613136)
