Three-dimensional instabilities of pantographic sheets with parabolic lattices: numerical investigations
From MaRDI portal
(Redirected from Publication:322116)
Recommendations
- Continuum modelling of pantographic sheets for out-of-plane bifurcation and vibrational analysis
- Dynamics of pantographic sheet around the clamping region: experimental and numerical analysis
- Numerical analysis of nonlinear wave propagation in a pantographic sheet
- scientific article; zbMATH DE number 6025255
- A two-dimensional continuum model of pantographic sheets moving in a 3D space and accounting for the offset and relative rotations of the fibers
- scientific article; zbMATH DE number 709525
- On certain aspects of three-dimensional instability of parallel flows
- On certain aspects of three-dimensional instability of parallel flows
- Instabilities in two-dimensional spatially periodic flows. Part III: Inviscid triangular lattice
- A unified computational approach to instability of periodic laminated materials
Cites work
- scientific article; zbMATH DE number 5127127 (Why is no real title available?)
- A 2-D continuum model of a mixture of bone tissue and bio-resorbable material for simulating mass density redistribution under load slowly variable in time
- A microscale second gradient approximation of the damage parameter of quasi-brittle heterogeneous lattices
- A mixture model with evolving mass densities for describing synthesis and resorption phenomena in bones reconstructed with bio-resorbable materials
- A model for frictional slip in woven fabrics
- A one-dimensional continuum with microstructure for single-wall carbon nanotubes bifurcation analysis
- A second gradient material resulting from the homogenization of an heterogeneous linear elastic medium
- A three-dimensional B-spline boundary element
- A two-dimensional gradient-elasticity theory for woven fabrics
- A variational approach for a nonlinear 1-dimensional second gradient continuum damage model
- A variational approach for a nonlinear one-dimensional damage-elasto-plastic second-gradient continuum model
- An implicit \(G^1\) multi patch B-spline interpolation for Kirchhoff-Love space rod
- An isogeometric implicit \(G^1\) mixed finite element for Kirchhoff space rods
- An iterative rational fraction polynomial technique for modal identification
- Analytical length scale calibration of nonlocal continuum from a microstructured buckling model
- At the origins and in the vanguard of peridynamics, non-local and higher-gradient continuum mechanics: an underestimated and still topical contribution of Gabrio Piola
- Circuit analog of a beam and its application to multimodal vibration damping, using piezoelectric transducers
- Consistent tangent operator for an exact Kirchhoff rod model
- Constitutive models for strongly curved beams in the frame of isogeometric analysis
- Control of sound radiation and transmission by a piezoelectric plate with an optimized resistive electrode
- Designing a light fabric metamaterial being highly macroscopically tough under directional extension: first experimental evidence
- Determination of the closure of the set of elasticity functionals
- Dynamic problems for metamaterials: review of existing models and ideas for further research
- Dynamics of SDOF oscillators with hysteretic motion-limiting stop
- Elasto-plastic analysis of Kirchhoff plates by high simplicity finite elements
- Equilibrium of elastic nets
- Euromech 563 Cisterna di Latina 17-21 March 2014. \textit{Generalized continua and their applications to the design of composites and metamaterials}: A review of presentations and discussions
- Free vibrations of finite-memory material beams
- Friction oscillator excited by moving base and colliding with a rigid or deformable obstacle
- Gedanken experiments for the determination of two-dimensional linear second gradient elasticity coefficients
- Geometrically nonlinear higher-gradient elasticity with energetic boundaries
- Hencky bar-chain model for buckling and vibration of beams with elastic end restraints
- Heterogeneous elastic solids: A mixed homogenization-rigidification technique
- Higher-order stress-strain theory for damage modeling implemented in an element-free Galerkin formulation
- Homogenization à la Piola produces second gradient continuum models for linear pantographic lattices
- Isogeometric analysis of plane-curved beams
- Linear stability of piezoelectric-controlled discrete mechanical systems under nonconservative positional forces
- Local symmetry group in the general theory of elastic shells
- Macroscopic description of microscopically strongly inhomogenous systems: a mathematical basis for the synthesis of higher gradients metamaterials
- Material symmetry group and constitutive equations of micropolar anisotropic elastic solids
- Mechanical response of fabric sheets to three-dimensional bending, twisting, and stretching
- Mode localization in dynamics and buckling of linear imperfect continuous structures
- Nonlinear microstrain theories
- On generalized Cosserat-type theories of plates and shells: a short review and bibliography
- On some mixed finite element methods for plane membrane problems
- On the contribution of Angelo Luongo to mechanics: in honor of his 60th birthday
- On the linear theory of micropolar plates
- On the shell theory on the nanoscale with surface stresses
- Poroelastic materials reinforced by statistically oriented fibres -- numerical implementation and application to articular cartilage
- Problems of identification of mechanical characteristics of viscoelastic composites
- Remodelling in statistically oriented fibre-reinforced materials and biological tissues
- Second-gradient continua as homogenized limit of pantographic microstructured plates: a rigorous proof
- Soft-impact dynamics of deformable bodies
- The complete works of Gabrio Piola: Volume I. Commented English translation of the original Italian works, published between 1825 and 1856
- The influence of different geometries of matrix/scaffold on the remodeling process of a bone and bioresorbable material mixture with voids
- The influence of surface tension on the effective stiffness of nanosize plates
- The postulations \textit{á la d'Alembert} and \textit{á la Cauchy} for higher gradient continuum theories are equivalent: a review of existing results
- The three-hinged arch as an example of piezomechanic passive controlled structure
- Theories of elasticity with couple-stress
- Truss Modular Beams with Deformation Energy Depending on Higher Displacement Gradients
Cited in
(45)- In-plane dynamic buckling of duoskelion beam-like structures: discrete modeling and numerical results
- Large deformations of Timoshenko and Euler beams under distributed load
- Qualitative investigations of experiments performed on 3D-FDM-printed pantographic structures made out of PLA
- Out-of-plane deformation reduction via inelastic hinges in fibrous metamaterials and simplified damage approach
- Plane contact problem on indentation of a flat punch into a transversely-isotropic half-plane with functionally graded transversely-isotropic coating
- Large deformations of 1D microstructured systems modeled as generalized Timoshenko beams
- Two-dimensional strain gradient damage modeling: a variational approach
- Modal analysis of laminates by a mixed assumed-strain finite element model
- Continuum modelling of pantographic sheets for out-of-plane bifurcation and vibrational analysis
- Exact solution of some exterior boundary value problems of elasticity in parabolic coordinates
- Linear pantographic sheets: existence and uniqueness of weak solutions
- Tension-dependent transverse buckles and wrinkles in twisted elastic sheets
- Equilibrium paths of Hencky pantographic beams in a three-point bending problem
- Can a Hencky-type model predict the mechanical behaviour of pantographic lattices?
- A Ritz approach for the static analysis of planar pantographic structures modeled with nonlinear Euler-Bernoulli beams
- Discrete is it enough? The revival of Piola-Hencky keynotes to analyze three-dimensional \textit{Elastica}
- Euromech 579, Arpino 3--8 April 2017: ``Generalized and microstructured continua: new ideas in modeling and/or applications to structures with (nearly)inextensible fibers -- a review of presentations and discussions
- Equilibria of a clamped Euler beam (\textit{Elastica}) with distributed load: large deformations
- Identification of two-dimensional pantographic structures with a linear D4 orthotropic second gradient elastic model accounting for external bulk double forces
- Exegesis of Sect. II and III.A from “Fundamentals of the Mechanics of Continua” by E. Hellinger
- Exegesis of the Introduction and Sect. I from “Fundamentals of the Mechanics of Continua”** by E. Hellinger
- How the properties of pantographic elementary lattices determine the properties of pantographic metamaterials
- Mechanical metamaterials: a state of the art
- Dynamical vector fields on pantographic sheet: experimental observations
- ``Fast and ``slow pressure waves electrically induced by nonlinear coupling in Biot-type porous medium saturated by a nematic liquid crystal
- Experimental analysis, discrete modeling and parameter optimization of SLS-printed bi-pantographic structures
- In plane shear and bending for first gradient inextensible pantographic sheets: numerical study of deformed shapes and global constraint reactions
- Numerical simulations of classical problems in two-dimensional (non) linear second gradient elasticity
- Nonlinear waves in pantographic beams induced by transverse impulses
- Maximum mechano-damage power release-based phase-field modeling of mass diffusion in damaging deformable solids
- Bias extension test for pantographic sheets: numerical simulations based on second gradient shear energies
- Three-point bending test of pantographic blocks: numerical and experimental investigation
- A new torsional energy for pantographic sheets
- Analytical solutions of 2-dimensional second gradient linear elasticity for continua with cubic-\(\mathrm{D}_4\) microstructure
- An Inverse Method to Get Further Analytical Solutions for a Class of Metamaterials Aimed to Validate Numerical Integrations
- A novel coupled system of non-local integro-differential equations modelling Young's modulus evolution, nutrients' supply and consumption during bone fracture healing
- A second gradient formulation for a 2D fabric sheet with inextensible fibres
- A review on 2D models for the description of pantographic fabrics
- Non-standard coupled extensional and bending bias tests for planar pantographic lattices. I: Numerical simulations
- Non-standard coupled extensional and bending bias tests for planar pantographic lattices. II: Comparison with experimental evidence
- A novel mathematical model for growth of capillaries and nutrient supply with application to prediction of osteophyte onset
- An explicit solution for the dynamics of a taut string of finite length carrying a traveling mass: the subsonic case
- Numerical identification procedure between a micro-Cauchy model and a macro-second gradient model for planar pantographic structures
- A two-dimensional continuum model of pantographic sheets moving in a 3D space and accounting for the offset and relative rotations of the fibers
- Are higher-gradient models also capable of predicting mechanical behavior in the case of wide-knit pantographic structures?
This page was built for publication: Three-dimensional instabilities of pantographic sheets with parabolic lattices: numerical investigations
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q322116)
