Publication:3727557
From MaRDI portal
zbMath0595.76001MaRDI QIDQ3727557
Publication date: 1984
76-01: Introductory exposition (textbooks, tutorial papers, etc.) pertaining to fluid mechanics
76M99: Basic methods in fluid mechanics
80M99: Basic methods in thermodynamics and heat transfer
Related Items
Experiment-based numerical simulation of unsteady viscous flow in stenotic collapsible tubes., Modeling of a front wall fired utility boiler for different operating conditions, Local entropy generation in an impinging jet: Minimum entropy concept evaluating various turbulence models, Generalized finite difference method for 3-D viscous flow in stenotic tubes with large wall deformation and collapse, A new unconditionally stable algorithm for steady-state fluid simulation of high-density plasma discharge, A front-tracking method for the computations of multiphase flow., Finite element simulation of mass transfer in laminar swirling decaying flow induced by means of a tangential inlet in an annulus, Turbulent effects on fluid flow through disordered porous media, Numerical simulation of the slider air bearing problem of hard disk drives by two multidimensional upwind residual distribution schemes over unstructured triangular meshes, A numerical model for magnetic chromatography, Computational modeling techniques for reliability of electronic components on printed circuit boards, On the use of heat transfer correlations for internal surfaces in the ASTEC code, Optimization of flow geometries applying quasianalytical sensitivity analysis, Mixing in T-junctions, Numerical simulation of the inlet plenum flow field for a LWR reactor pressure vessel, An analytical solution for conduction-dominated unidirectional solidification of binary mixtures, Modelling control of crystal growth processes, Multigrid iterative algorithm using pseudo-compressibility for three-dimensional mantle convection with strongly variable viscosity, A fast computation technique for the direct numerical simulation of rigid particulate flows, A comparison of GMRES and CGSTAB accelerations for incompressible Navier- Stokes problems, SUCCA -- an alternative scheme to reduce the effects of multidimensional false diffusion, Discrete form of the GCL for moving meshes and its implementation in CFD schemes, Interpolation-based condensation of algebraic semi-discrete models with frequency response application, Convection of a freezing fluid in a square cell after loss of hydrostatic stability, Use of high accuracy schemes to handle free surfaces in computing unsteady two-phase flows, A parallel block multi-level preconditioner for the 3D incompressible Navier-Stokes equations., A special purpose computer for molecular dynamics calculations, Finite-element simulation of laminar swirling decaying flow induced by means of a tangential inlet in an annulus, A consistent hybrid finite-volume/particle method for the PDF equations of turbulent reactive flows, Modeling melt convection in phase-field simulations of solidification, The integrated space-time finite volume method and its application to moving boundary problems, A compact monotonic discretization scheme for solving second-order vorticity-velocity equations, Time-accurate computation of unsteady free surface flows using an ALE-segregated equal-order FEM, Optimization of convergence acceleration in multigrid numerical solutions of conductive-convective problems, Flow topology in a steady three-dimensional lid-driven cavity, A numerical and experimental investigation of the modeling of microwave heating for liquid layers using a rectangular wave guide (effects of natural convection and dielectric properties), AILU preconditioning for the finite element formulation of the incompressible Navier--Stokes equations, The extension of incompressible flow solvers to the weakly compressible regime, Transition in a 2-D lid-driven cavity flow, SUPG stabilized finite element resolution of the Navier--Stokes equations. Applications to water treatment engineering, On the use of surface interpolation techniques in generalised finite volume strategies for simulating transport in highly anisotropic porous media., A blended pressure/density based method for the computation of incompressible and compressible flows., Shape identification for natural convection problems using the adjoint variable method, High-resolution FEM-TVD schemes based on a fully multidimensional flux limiter, Numerical simulation of melting in two-dimensional cavity using adaptive grid, Numerical analysis of a single row of coolant jets injected into a heated crossflow, Spectrally accurate numerical incompressible flows with deformed boundaries: a finite volume preconditioning method, A control volume-based finite difference method for solving the equilibrium equations in terms of displacements, Flow and heat transfer in a lid-driven cavity filled with a stably stratified fluid, Mathematical model of bubble sloshing dynamics for cryogenic liquid helium in orbital spacecraft Dewar container, A modified skew upwind scheme for fluid flow and heat transfer computations, A finite difference error arising from the use of a staggered grid, Semi-implicit extension of a Godunov-type scheme based on low Mach number asymptotics. I: One-dimensional flow, An unstructured mesh cell-centered control volume method for simulating heat and mass transfer in porous media: Application to softwood drying. I: The isotropic model, Finite volume method for thermo-elasto-plastic stress analysis, The numerical modelling of DC electromagnetic pump and brake flow, A two-dimensional orthotropic model for simulating wood drying processes, A natural extension of the conventional finite volume method into polygonal unstructured meshes for CFD application, A comparison of higher-order bounded convection schemes, Modeling of turbulent flow in the neighborhood of forced and freely oscillating rectangular prisms, Parallel multigrid finite volume computation of three-dimensional thermal convection, An accurate Cartesian grid method for viscous incompressible flows with complex immersed boundaries, Incompressible turbulent flow simulation using a Galerkin/least-squares formulation and a low Reynolds number \(k-\epsilon\) model, Three-dimensional numerical simulations of viscoelastic flows -- predictability and accuracy, Simulation of the gas temperature deviation in large-scale tangential coal fired utility boilers, A local mesh refinement multigrid method for 3-D convection problems with strongly variable viscosity, Bifurcation and stability of forced convection in tightly coiled ducts: multiplicity, Coarse-graining effects on time-dependent information on invariant sets, Numerical modelling of viscoelastic cavity driven flow using finite difference simulations, Effect of viscous dissipation in natural convection along a heated vertical plate, Laminar film condensation in a vertical tube in the presence of noncondensable gas, A heterogeneous three-dimensional computational model for wood drying, An assessment of streamline curvature effects on the mixing region of a turbulent plane jet in crossflow, Comparison of several discrete arithmetic schemes for simulating a constrained jet and a lab-scale tangential fired furnace, An adaptative augmented Lagrangian method for three-dimensional multimaterial flows, A finite volume method to solve the 3D Navier-Stokes equations on unstructured collocated meshes, A class of difference schemes with flexible local approximation, Numerical study of flow and heat transfer in curvilinear ducts: applications of elliptic grid generation, High-resolution FEM--FCT schemes for multidimensional conservation laws, High fidelity field simulations using density and pressure based approaches, Optimal multigrid solutions of two-dimensional convection-conduction problems, Finite-volume compact schemes on staggered grids, An efficient smoother for the Stokes problem, The phase-field method in the sharp-interface limit: A comparison between model potentials, An element-by-element BICGSTAB iterative method for three-dimensional steady Navier-Stokes equations, An alternative fixed grid method for solution of the classical one-phase Stefan problem, Direct numerical simulation of the Brownian motion of particles by using fluctuating hydrodynamic equations, Numerical study of the optimum counter-flow mode of air jets in a large utility furnace, Positivity conditions in meshless collocation methods, An algebraic solution for a 2-D partial differential energy equation with a Robin boundary condition generated from the simpler solution for a Dirichlet boundary condition, A consistently formulated QUICK scheme for fast and stable convergence using finite-volume iterative calculation procedures, How to discretize the pressure gradient for curvilinear MAC grids, An explicit scheme for advection-diffusion modelling in two dimensions, Numerical modeling of macro and micro behaviors of materials in processing: A review, Truncation error analysis of the finite volume method for a model steady convective equation, Performance of five-point differencing schemes for two-dimensional fluid transport equations, Numerical simulations of viscous rotating flows using a new pressure- based method, Computation of physiological bifurcation flows using a patched grid, Advection-dispersion modelling in three dimensions, The piecewise parabolic finite analytic method. I: Theory, Shooting methods for some steady diffusion and convection problems, Skew upstream differencing schemes for problems involving fluid flow, A study of the transport process of buoyancy-induced and thermocapillary flow of molten alloy, Finite element solution of the Navier-Stokes equations for incompressible flow using a segregated algorithm, An improved convection scheme applied to recombining divertor plasma flows, Numerical simulations for radiation hydrodynamics. I: Diffusion limit, Fluid stochastic Petri nets: Theory, applications, and solution techniques, Particles moving in spatially bounded, viscous fluids, Discretisation procedures for multi-physics phenomena, An integer lattice realization of a Lax scheme for transport processes in multiple component fluid flows, Multigrid methods for incompressible heat flow problems with an unknown interface, Development of an implicit method for multi-fluid flow simulations, Numerical studies on the transient behaviour of a fire plume and ceiling jet, Constitutive-operator smoothing by condensation, Production planning for multiproduct dehydration plants, A time-implicit filling algorithm, On the flow of non-Newtonian polymer solutions, The CFD analysis of simple parabolic and elliptic MHD flows, Finite analytic solution of a two-dimensional sea breeze on a regular grid, Hybrid Laplace transform/weighting function scheme for transient multidimensional conservation equations, The simulation of electrified liquid jets, Numerical simulation of discharged waste heat and contaminants into the south estuary of the Yangtze river, Development of generalized block correction procedures for the solution of discretized Navier-Stokes equations, Exponential difference scheme for numerical simulation of viscous gas flow, Thermocapillary flows in finite size systems, Modelling of a single confined turbulent slot jet impingement using various \(k-\varepsilon\) turbulence models, A control-volume finite element method for dilute gas-solid particle flows, Temporal evolution of periodic disturbances in two-layer Couette flow, Accuracy characteristics of traditional finite volume discretizations for unsteady computational fluid dynamics, A theoretical simulation of fire extinction by water spray in a computer cabinet, A div-curl-grad formulation for compressible buoyant flows solved by the least-squares finite element method, Numerical simulation of a laminar jet flow: A comparison of three CFD models, The use of upwind schemes at high Reynolds number - a cautionary note, A local grid refinement technique based upon Richardson extrapolation, Local mesh refinement within a multi-block structured-grid scheme for general flows, On discrete projection methods for the incompressible Navier-Stokes equations: An algorithmical approach, The numerical simulation of fully developed duct flows, Multiphase dynamics in arbitrary geometries on fixed Cartesian grids, Average-state Jacobians and implicit methods for compressible viscous and turbulent flows, Finite volume schemes for elliptic and elliptic-hyperbolic problems on triangular meshes, Hybrid grid -- a specialized mesh system for full three-dimensional numerical simulation in natural waters, Finite-volume CFD procedure and adaptive error control strategy for grids of arbitrary topology, A new turbulence model for the axisymmetric plume, MHD-free convection from a vertical plate embedded in a thermally stratified porous medium with Hall effects, Numerical simulations for nonlinear heat transfer in a system of multimaterials, Transient buoyancy-induced three-dimensional flows in slender enclosures with coaxial heated cylinder, Hydromagnetic two-phase flow in a channel, Turbulent transonic flow simulation using a pressure-based method, Effects of the rate of latent heat release on fluid flow and solidification patterns during alloy solidification, A hybrid numerical analysis of heat transfer and thermal stress in a solidifying body using FVM and FEM, Solutions for fluid-particle flow and heat transfer in a porous channel, Hydromagnetic natural convection from an isothermal inclined surface adjacent to a thermally stratified porous medium, A conservative pressure-correction method for flow at all speeds., Numerical solution of a transformed parabolic equation, A cell-centered finite volume scheme on general meshes for the Stokes equations in two space dimensions., A high-order conservative Patankar-type discretisation for stiff systems of production--destruction equations, Semi-implicit finite volume scheme for image processing in 3D cylindrical geometry., Jacobian-free Newton-Krylov methods: a survey of approaches and applications., Applications of upwind and downwind schemes for calculating electrical conditions in a wire-plate electrostatic precipitator., A general mass consistency algorithm for hybrid particle/finite-volume PDF methods., A simplified gradient evaluation on non-orthogonal meshes; application to a plasma torch simulation method., Multigrid correction-storage formulation applied to the numerical solution of incompressible laminar recirculating flows, A note on laminar axisymmetric and two-dimensional glycerol plumes, Entrainment of inclusions from the dross in stirred reactors for melt treatment, A finite volume unstructured mesh approach to dynamic fluid--structure interaction: an assessment of the challenge of predicting the onset of flutter, Comparison of three buoyancy extended versions of the \(k-\epsilon-\overline{{t'}^2}\) model in predicting turbulent plane plume, Dynamic solid mechanics using finite volume methods, Study of the oscillatory regime of a turbulent plane jet impinging in a rectangular cavity, Numerical approach to fast reactions in reaction-diffusion systems: Application to buffered calcium waves in bistable models, Effect of water density inversion on the plane-parallel flow and heat transfer in a channel of constant width, On Newton-Krylov multigrid methods for the incompressible Navier-Stokes equations, Comparison of finite element and finite volume methods application in geometrically nonlinear stress analysis, Analysis of three-dimensional flow in a cylindrical sediment oxygen demand chamber, Computation of the turbulent plane plume using the \(k-\varepsilon-\overline{t^{\prime 2}}-\gamma\) model, A high-order characteristic upwind FV method for incompressible flow and heat transfer simulation on unstructured grids, Two- and three-dimensional nested simulation by using FEM and FVA to analyze flows in an estuary, A semianalytical method for solving equations describing the transport of contaminants in two-dimensional homogeneous porous media., Factorizable schemes for the equations of fluid flow, The unified simulation for incompressible and compressible flow by the predictor-corrector scheme based on the CIP method, Prediction of dust loss from conveyors using computational fluid dynamics modelling, CFD, a design tool for a new hot metal desulfurization technology
