Reissner plates with plastic behavior: probability of failure
Summary: The current paper shows the application of the boundary element method for the analysis of plates under shear stress causing plasticity. In this case, the shear deformation of a plate is considered by means of Reissner's theory. The probability of failure of a Reissner's plate due to a proposed index plastic behavior \(I_{\text{PB}}\) is calculated taking into account the uncertainty in mechanical and geometrical properties. The problem is developed in three dimensions. The classic plasticity's theory is applied and a formulation for initial stresses that lead to the boundary integral equations due to plasticity is also used. For the plasticity calculation, the von Misses criterion is used. To solve the nonlinear equations, an incremental method is employed. The results show a relatively small failure probability \((P_F)\) for the ranges of loads between \(0.6 < \widehat{W} < 1.0\). However, for values between \(1.0 < \widehat{W} < 2.5\), the probability of failure increases significantly. Consequently, for \(\widehat{W} \geq 2.5\), the plate failure is imminent. The results are compared to those that were found in the literature and the agreement is good.
- Elastoplastic analysis of Reissner's plates by the boundary element method
- Plastic buckling analysis of thick plates using \(p\)-Ritz method
- Elastic-viscoplastic analysis of plate bending with Reissner's theory by the boundary element method
- An analysis of inelastic Reissner-Mindlin plates
- Elasto-plastic plate bending analysis by a boundary element method with initial plastic moments
- Application of the generalized perturbation-based stochastic boundary element method to the elastostatics
- Boundary element formulations for Mindlin plate on an elastic foundation with dynamic load
- Boundary element method for shear deformable plates with combined geometric and material nonlinearities
- Boundary element methods in probabilistic structural analysis (PBEM)
- scientific article; zbMATH DE number 3146613 (Why is no real title available?)
- scientific article; zbMATH DE number 3420323 (Why is no real title available?)
- scientific article; zbMATH DE number 3061938 (Why is no real title available?)
- scientific article; zbMATH DE number 3069039 (Why is no real title available?)
- Nonlinear bending analysis of functionally graded plates under pressure loads using a four variable refined plate theory
- On a Variational Theorem in Elasticity
- Pointwise errors in the classical and in Reissner's linear theory of plates, especially for concentrated loads
- Probabilistic fracture mechanics analysis of linear-elastic cracked structures by spline fictitious boundary element method
- Probabilistic fracture mechanics by the boundary element method
- Reformulation of Mindlin-Reissner governing equations of functionally graded circular plates
- Reliability analysis of plane elasticity problems by stochastic spline fictitious boundary element method
- Reliability analysis of Reissner plate bending problems by stochastic spline fictitious boundary element method
- Reliability-based shape optimization of two-dimensional elastic problems using BEM
- Stochastic boundary elements in elastostatics
- Stochastic second-order BEM perturbation formulation
- The fundamental solution of mindlin plates resting on an elastic foundation in the Laplace domain and its applications
This page was built for publication: Reissner plates with plastic behavior: probability of failure
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q1720843)
