scientific article; zbMATH DE number 3420323
From MaRDI portal
Publication:5683765
zbMath0266.73008MaRDI QIDQ5683765
Publication date: 1970
Title: zbMATH Open Web Interface contents unavailable due to conflicting licenses.
Thin bodies, structures (74Kxx) Introductory exposition (textbooks, tutorial papers, etc.) pertaining to mechanics of deformable solids (74-01) Waves in solid mechanics (74Jxx) Generalities, axiomatics, foundations of continuum mechanics of solids (74Axx) Elastic materials (74Bxx)
Related Items
Boundary element solution of the plane elasticity problem for an anisotropic body with free smooth boundaries, Analytical solution of the Cerruti problem under linearly distributed horizontal loads over polygonal domains, Analytical solutions for an infinite transversely isotropic functionally graded sectorial plate subjected to a concentrated force or couple at the tip, A finite element analysis of some boundary value problems for a new type of constitutive relation for elastic bodies, Nonlinear sensing of ionic polymer metal composites, A direct approach to fiber and membrane reinforced bodies. I: Stress concentrated on curves for modelling fiber reinforced materials, A novel integration scheme for solution of consistent mass matrix in free and forced vibration analysis, A key-node finite element method and its application to porous materials, Elasticity solutions for orthotropic functionally graded curved beams, A non-classical Kirchhoff plate model incorporating microstructure, surface energy and foundation effects, General quantitative analysis of stress partitioning and boundary conditions in undrained biphasic porous media via a purely macroscopic and purely variational approach, Indentation of a spherical cavity in an elastic body by a rigid spherical inclusion: influence of non-classical interface conditions, Formulating an effective generalized four-sided element, Structural analysis using a dipolar elastic Timoshenko beam, On a 2D hydro-mechanical lattice approach for modelling hydraulic fracture, Influence of linear work hardening on the elastic-plastic behavior of a functionally graded thick-walled tube, Meshfree analysis with the aid of NURBS boundary, Selection of model discrepancy priors in Bayesian calibration, Stress response inside perturbed particle assemblies, An edge-based smoothed tetrahedron finite element method (ES-T-FEM) for 3D static and dynamic problems, A `FE-meshfree' TRIA3 element based on partition of unity for linear and geometry nonlinear analyses, A numerical approach based on the meshless collocation method in elastodynamics, Adhesion-induced instabilities in elastic and elastic-plastic contacts during single and repetitive normal loading, Static analysis of two-dimensional elastic structures using global collocation, A higher-order theory for static and dynamic analyses of functionally graded beams, Temperature and thermal stresses in material of a pad during braking, On the large amplitude free vibrations of tapered beams: an analytical approach, A new methodology to obtain the exact solutions of isotropic plane beam subjected to arbitrary loads, The exact theory of deep beams without ad hoc assumptions, A meshless collocation method for the plane problems of functionally graded material beams and plates using the DRK interpolation, Further study on the refined theory of rectangle deep beams, Mathematical modeling of motion of a fluid partially filling a rotating cylinder with radially aligned edges, Modelling and analysis of the natural oscillations of a prismatic elastic beam based on a projection approach, The stress and strain concentrations of an elliptical hole in an elastic plate of finite thickness subjected to tensile stress, A non-classical third-order shear deformation plate model based on a modified couple stress theory, A quadratic programming formulation for the solution of layered elastic contact problems: example applications and experimental validation, Solution of de Saint Venant flexure-torsion problem for orthotropic beam via LEM (line element-less method), An isogeometrical approach to error estimation and stress recovery, Analytical solution of a bilayer functionally graded cantilever beam with concentrated loads, An alternative analytic approach to the Brazilian disc test with friction at the disc-jaw interface, Size-dependent vibration of functionally graded curved microbeams based on the modified strain gradient elasticity theory, Symplectic system based analytical solution for bending of rectangular orthotropic plates on Winkler elastic foundation, Stress analysis of functionally graded rotating discs: analytical and numerical solutions, Analytical solutions to edge effect of composite laminates based on symplectic dual system, Plastic deformation modes in perforated sheets and their relation to yield and limit surfaces, Galerkin-based energy-momentum consistent time-stepping algorithms for classical nonlinear thermo-elastodynamics, Unstructured finite volume method for matrix free explicit solution of stress-strain fields in two dimensional problems with curved boundaries in equilibrium condition, Enhancing isogeometric analysis by a finite element-based local refinement strategy, Locking-free numerical methods for nearly incompressible elasticity and incompressible flow on moving domains, Detecting stress fields in an optimal structure. I. Two-dimensional case and analyzer, Dynamical bending analysis of functionally graded infinite cylinder with rigid core, A posteriori error estimator and an adaptive technique in meshless finite points method, A PU-based meshless Shepard interpolation method satisfying delta property, A cell-based smoothed radial point interpolation method (CS-RPIM) for static and free vibration of solids, Analyzing static three-dimensional elastic domains with a new infinite boundary element formulation, Rapid solution of 3-D oscillatory elastodynamics using the pfft accelerated BEM, Coupling of the improved element-free Galerkin and boundary element methods for two-dimensional elasticity problems, Analyzing 2D fracture problems with the improved element-free Galerkin method, A boundary element method for the analysis of CNT/polymer composites with a cohesive interface model based on molecular dynamics, A least-square radial point collocation method for adaptive analysis in linear elasticity, New concepts for moving least squares: an interpolating non-singular weighting function and weighted nodal least squares, An approach to the derivation of exact integration formulae in the boundary element method, Local integral equation formulation for axially symmetric problems involving elastic FGM, Boundary element analysis of reinforced concrete structural elements, The multi-domain boundary contour method for interface and dissimilar material problems, Revisit of two classical elasticity problems by using the Trefftz method, Strain gradient solution for the Eshelby-type polyhedral inclusion problem, A nonlocal contact formulation for confined granular systems, On error control in the element-free Galerkin method, A node enrichment adaptive refinement in discrete least squares meshless method for solution of elasticity problems, A new MLPG method for elastostatic problems, Semi-exact solution for thermo-mechanical analysis of functionally graded elastic-strain hardening rotating disks, A frame-independent solution to Saint-Venant's flexure problem, Robust topology optimization under loading uncertainty based on linear elastic theory and orthogonal diagonalization of symmetric matrices, Multiresolution molecular mechanics: convergence and error structure analysis, A two-dimensional base force element method using concave polygonal mesh, New approximation functions in the meshless finite volume method for 2D elasticity problems, Boundary element method for vibration analysis of two-dimensional anisotropic elastic solids containing holes, cracks or interfaces, Slow convergence of the BEM with constant elements in solving beam bending problems, Estimating the optimum number of boundary elements by error estimation in a defined auxiliary problem, General solutions of plane elasticity of one-dimensional orthorhombic quasicrystals with piezoelectric effect, On wave propagation in anisotropic elastic cylinders at nanoscale: surface elasticity and its effect, A higher-order shear and normal deformation functionally graded plate model: some recent results, Quasi-convex reproducing kernel meshfree method, A microstructure- and surface energy-dependent third-order shear deformation beam model, IETI -- isogeometric tearing and interconnecting, Mechanical aspects of internal pressure, A fast multiple-scale polynomial solution for the inverse Cauchy problem of elasticity in an arbitrary plane domain, Homogenized model for plate periodic structure with initial stresses, On Boussinesq's problem, On dual conservation laws in planar elasticity, Steady state thermoelastic contact problem in a functionally graded material, New methods for estimating the torsional rigidity of composite bars, Remarks on axially and centrally symmetric elasticity problems, Analytical solutions to the planar non-axisymmetric elasticity and thermoelasticity problems for homogeneous and inhomogeneous annular domains, Influence of the spatial variation of Poisson's ratio upon the elastic field in nonhomogeneous axisymmetric bodies, Stress distribution and wrinkling of webs under non-uniform and asymmetric edge loading, An efficient adaptive analysis procedure for node-based smoothed point interpolation method (NS-PIM), Stress fields and Eshelby forces on half-plane inhomogeneities with eigenstrains and strip inclusions meeting a free surface, Modeling of evolution of growing coating composition, Analytical solutions for the displacement and stress of lined circular tunnel subjected to surcharge loadings in semi-infinite ground, Enhanced nodal gradient finite elements with new numerical integration schemes for 2D and 3D geometrically nonlinear analysis, Analytical solution for the stress field of hierarchical defects: multiscale framework and applications, Stress analysis in an isotropic hyperbolic rotating disk fitted with rigid shaft, Variable separation method for solving boundary value problems of isotropic linearly viscoelastic bodies, Elasticity solutions for a transversely isotropic functionally graded circular plate subject to an axisymmetric transverse load \(qr^k\), The concentration of stress and strain in finite thickness elastic plate containing a circular hole, Elastic characterization of orthotropic plates of any shape via static testing, A pressurized functionally graded hollow cylinder with arbitrarily varying material properties, A refined theory of elastic thick plates for extensional deformation, Analytical solutions to the 2D elasticity and thermoelasticity problems for inhomogeneous planes and half-planes, On state-space elastostatics within a plane stress sectorial domain -- the wedge and the curved beam, Reduced-order models for microelectromechanical rectangular and circular plates incorporating the Casimir force, Using the simple compression test to determine Young's modulus, Poisson's ratio and the Coulomb friction coefficient, Elastic stress distributions for hyperbolic and parabolic notches in round shafts under torsion and uniform antiplane shear loadings, Stress distribution in a rotating elastic-plastic tube, Exact integration in the boundary element method for two-dimensional elastostatic problems, Torsion of uniform bars with polygon cross-section, Eigenfunction expansion method and its application to two-dimensional elasticity problems based on stress formulation, Strain gradient solution for a finite-domain Eshelby-type plane strain inclusion problem and Eshelby's tensor for a cylindrical inclusion in a finite elastic matrix, Numerical modeling of crack formation in powder forming processes, The incompressible two-dimensional potential flow through blades of a rotating radial impeller, A parametric study on the dynamic response of planar multibody systems with multiple clearance joints, On the continuous contact force models for soft materials in multibody dynamics, Multi-scale B-spline method for 2-D elastic problems, The methods of complex potentials, singular integral equations and integral transformations in a series of problems for the reinforcement of cracked plates, The Weyl-type asymptotic formula for biharmonic Steklov eigenvalues on Riemannian manifolds, A new partition of unity finite element free from the linear dependence problem and possessing the delta property, A point interpolation method with least square strain field (PIM-LSS) for solution bounds and ultra-accurate solutions using triangular mesh, A moving Kriging interpolation-based element-free Galerkin method for structural dynamic analysis, Immersed b-spline (i-spline) finite element method for geometrically complex domains, Isogeometric analysis using polynomial splines over hierarchical T-meshes for two-dimensional elastic solids, Isogeometric analysis for trimmed CAD surfaces, Maximum-entropy meshfree method for compressible and near-incompressible elasticity, An improved NURBS-based isogeometric analysis with enhanced treatment of essential boundary conditions, Stabilized low-order finite elements for frictional contact with the extended finite element method, 8- and 12-node plane hybrid stress-function elements immune to severely distorted mesh containing elements with concave shapes, Meshfree-enriched simplex elements with strain smoothing for the finite element analysis of compressible and nearly incompressible solids, A partition-of-unity based `FE-meshfree' QUAD4 element with radial-polynomial basis functions for static analyses, A variational multiscale a posteriori error estimation method for mixed form of nearly incompressible elasticity, Path-independent integrals around two circular holes in an infinite plate under biaxial loading conditions, On the rectilinear shear of compressible and incompressible elastic slabs, A non-classical Mindlin plate model based on a modified couple stress theory, Proper orthogonal decomposition and Monte Carlo based isogeometric stochastic method for material, geometric and force multi-dimensional uncertainties, The dual reciprocity method and the numerical Green's function for BEM fracture mechanic problems, Effects of strength difference and intermediate principal stress on plane strain elastic-plastic bending of a curved beam, A size-dependent nonlinear microbeam model based on the micropolar elasticity theory, On the elastic-plastic rotating shrink fit with linearly hardening hub exhibiting variable thickness in exponential form, A solution of cosine pressures on a hollow cylinder and the limit when \(k\to 0\), The dome and the ring: verification of an old mathematical model for the design of a stiffened shell roof, On pressurized curvilinearly orthotropic circular disk, cylinder and sphere made of radially nonuniform material, Electro-thermo-mechanical torsional buckling of a piezoelectric polymeric cylindrical shell reinforced by DWBNNTs with an elastic core, Smoothed particle hydrodynamics using interparticle contact algorithms, Shear deformable bars of doubly symmetrical cross section under nonlinear nonuniform torsional vibrations-application to torsional postbuckling configurations and primary resonance excitations, Principal compliance and robust optimal design, Enhanced stiffness modeling of manipulators with passive joints, Asymptotics of solutions to the spectral elasticity problem for a two-dimensional body with a small cavern, Development of a novel meshless Local Kriging (LoKriging) method for structural dynamic analysis, Variational eigenstrain multiscale finite element method, Positivity conditions in meshless collocation methods, Stress concentration in polymer extrusion dies, Continuum damage growth analysis using element free Galerkin method, Axisymmetric SPH simulation of elasto-plastic contact in the low velocity impact, A universal expression for bounds on the torsional rigidity of cylindrical shafts containing fibers with arbitrary transverse cross-sections, A Hamiltonian state space approach for 3D analysis of circular cantilevers, A meshless local moving Kriging method for two-dimensional solids, Smoothed FE-meshfree method for solid mechanics problems, On asymmetric bending of functionally graded solid circular plates, Crack repair using an elastic filler, A microstructure-dependent Timoshenko beam model based on a modified couple stress theory, Green's function and Eshelby's tensor based on a simplified strain gradient elasticity theory, Elasticity solutions for a uniformly loaded rectangular plate of functionally graded materials with two opposite edges simply supported, Asymptotic approach to analysis of the stress-strain state of elastic bodies, On asymptotic properties of biharmonic Steklov eigenvalues, Computational analysis of elastic field of deep curved beams/rings using displacement-function equilibrium method, A consistently coupled isogeometric-meshfree method, Coupling diffusion-reaction-mechanics model for oxidation, Solutions of a twelfth order thick plate theory, Thermoelastic stresses in a half-space heated by a concentrated energy flux, On the solution of steady-state elastodynamic crack problems by using complex variable methods, Probabilistic approach and size effect in brittle materials under multiaxial stress states, Application of the CVBEM to non-uniform St. Venant torsion, Interface slip between two half-planes caused by a steadily moving force, Eigenfunction expansion method of upper triangular operator matrix and application to two-dimensional elasticity problems based on stress formulation, A meshless generalized finite difference method for 2D elasticity problems, A meshless regularized local boundary integral equation method and the selection of weight function and geometrical parameters, A high-order three dimensional numerical manifold method with continuous stress/strain field, A weak formulation of boundary integral equations, with application to elasticity problems, Analyses of large quasistatic deformations of inelastic bodies by a new hybrid-stress finite element algorithm: Applications, Some polynomial solutions for the non-axisymmetric Boussinesq problem, Elastic waves generated by loading applied to surface of spherical cavity, The finite deformation of a pressurized circular tube for a class of compressible materials, The motion of a detaching elastic body, On the first order change of bifurcation buckling loads due to structural geometry perturbations, Expedient implicit integration with adaptive time stepping algorithm for nonlinear transient analysis, The method of solving axisymmetric problems in an elastic space by complex functions and some examples, The regular prismatic bar under torsion: A new approach based on caustics. (Review article), Solutions for the anisotropic elastic wedge at critical wedge angles, The nature of the stresses induced during tissue growth, A multidomain differential quadrature approach to plane elastic problems with material discontinuity, Dramatically stiffer elastic composite materials due to a negative stiffness phase?, On the magneto-thermo-elastic responses of FG annular sandwich disks, Biot's problem for a Biot material, Contact radius and curvature corrections to the nonlocal contact formulation accounting for multi-particle interactions in elastic confined granular systems, Revisiting the elastic solution for an inner-pressured functionally graded thick-walled tube within a uniform magnetic field, Dynamic characteristics of deeply buried spherical biogas digesters in viscoelastic soils, New strong formulation for material nonlinear problems based on the particle difference method, Torsion of a Cosserat elastic bar with square cross section: theory and experiment, A continuous 1-D model for the coiling of a weakly viscoelastic jet, On elastic fields of perfectly bonded and sliding circular inhomogeneities in an infinite matrix, Transient dynamic analysis of generally anisotropic materials using the boundary element method, Equilibrium state of a softening elastoplastic medium with an expanding spherical cavity, An adaptive node regeneration technique for the efficient solution of elasticity problems using MDLSM method, A cell-based smoothed radial point interpolation method (CS-RPIM) for three-dimensional solids, An improved numerical manifold method and its application, A hybrid `FE-meshless' Quad4 with continuous nodal stress using radial-polynomial basis functions, Construct `FE-meshfree' Quad4 using mean value coordinates, A high-order numerical manifold method with nine-node triangular meshes, A stable nodal integration method with strain gradient for static and dynamic analysis of solid mechanics, A novel numerical manifold method with derivative degrees of freedom and without linear dependence, Elastoplastic analysis of Reissner's plates by the boundary element method, A partition-of-unity based `FE-meshfree' triangular element with radial-polynomial basis functions for static and free vibration analysis, A new type of high-order elements based on the mesh-free interpolations, Stochastic spline fictitious boundary element method for modal analysis of plane elastic problems with random fields, Stochastic analysis using the generalized perturbation stable node-based smoothed finite element method, A two-dimensional consistent approach for static and dynamic analyses of uniform beams, A generalized beta finite element method with coupled smoothing techniques for solid mechanics, Independent cover meshless method for the simulation of multiple crack growth with arbitrary incremental steps and directions, Structured mesh refinement in MLS-based numerical manifold method and its application to crack problems, Improved numerical manifold method (iNMM) -- an extra-DOF free and interpolating NMM with continuous nodal stress, An edge-based smoothed numerical manifold method and its application to static, free and forced vibration analyses, A Trefftz collocation method (TCM) for three-dimensional linear elasticity by using the Papkovich-Neuber solutions with cylindrical harmonics, From the Euler-Bernoulli beam to the Timoshenko one through a sequence of Reddy-type shear deformable beam models of increasing order, Analysis of 2-dimensional transient problems for linear elastic and piezoelectric structures using the consecutive-interpolation quadrilateral element (CQ4), New formulation of quasi-conforming method: a simple membrane element for analysis of planar problems, Core-shell spheres under diametrical compression: an analytical solution, On the analysis of pure bending of rigid-plastic beams in strain-gradient plasticity, Multiscale modeling of regularly staggered carbon fibers embedded in nano-reinforced composites, The technique of domain superposition to solve piecewise homogeneous elastic problems, Application of Mises yield criterion to rotating solid disk problem, Materials and structures with macroscopic negative Poisson's ratio, Dynamic stability of a thin film bonded to a compliant substrate subjected to a step load with damping, Stochastic Galerkin approximation of the Reynolds equation with irregular film thickness, Static analytical approach of moderately thick cylindrical ribbed shells based on first-order shear deformation theory, A novel shape-free plane quadratic polygonal hybrid stress-function element, Discontinuous deformation analysis enriched by the bonding block model, A local solution approach for adaptive hierarchical refinement in isogeometric analysis, A micro-scale modeling of Kirchhoff plate based on modified strain-gradient elasticity theory, Laminated beam analysis by polynomial, trigonometric, exponential and zig-zag theories, Nonlinear performance of continuum mechanics based beam elements focusing on large twisting behaviors, Multiresolution molecular mechanics: a unified and consistent framework for general finite element shape functions, A three-dimensional boundary element stress and bending analysis of transversely/longitudinally graded plates with circular cutouts under biaxial loading, Bending, buckling and free vibration analysis of size-dependent functionally graded circular/annular microplates based on the modified strain gradient elasticity theory, Seepage consolidation under plane deformation of elastic half-space, Layer-element analysis of multilayered saturated soils subject to axisymmetric vertical time-harmonic excitation, Reactive constrained mixtures for modeling the solid matrix of biological tissues, An augmented method for 4th order PDEs with discontinuous coefficients, Mechanical degradation of electrode materials within single particle model in Li-ion batteries for electric vehicles, An analytical symplectic approach to the vibration analysis of orthotropic graphene sheets, Elastic analysis of variable profile and polar orthotropic FGM rotating disks for a variation function with three parameters, Extended isogeometric analysis based on Bézier extraction for the buckling analysis of Mindlin-Reissner plates, Simplified elastic wave modeling in seven-wire prestressed parallel strands, Evaluation of the stiffness matrix in static and dynamic elasticity problems, Eigenvalues of the Wentzell-Laplace operator and of the fourth order Steklov problems, An immersed-isogeometric model: application to linear elasticity and implementation with THBox-splines, Reissner plates with plastic behavior: probability of failure, Seabed dynamic response of offshore wind turbine foundation under vertical harmonic loading: an analytic solution, The elastic solution of a radial heterogeneous cylinder subjected to non-uniform distributed normal and tangential loads, Control of crack formation in rock in using nonexplosive braking compositions, A separation of the boundary geometry from the boundary functions in PIES for 3D problems modeled by the Navier-Lamé equation, Approximation of the derivatives of solutions in a normalized domain for 2D solids using the PIES method, Finite element analysis of plane strain solids in strain-gradient elasticity, Size-dependent nonlinear dynamics of a microbeam based on the modified couple stress theory, An analytical model for the fracture behavior of the flexible lithium-ion batteries under bending deformation, The surface displacements of an elastic half-space subjected to uniform tangential tractions applied on a circular area, Generalized Fourier series solution of torsion of an elliptic beam with microstructure., Mathematical modeling of contact of two surfaces in the first order of tangency, The plane wedge problem loaded at its apex -- the self-similarity property and the characteristic vector, Probabilistic finite element analysis of a craniofacial finite element model, Shakedown analysis for porous materials, Elastic-plastic infinitesimal deformation in a solid disk under heat effect by using seth theory, A numerical analysis of Saint-Venant torsion in strain-gradient bars, A single variable shear deformable nonlocal theory for transversely loaded micro- and nano-scale rectangular beams, Numerical modelling of the plane problem of the stress state of a tube immersed in a liquid, Size-dependent buckling analysis of functionally graded third-order shear deformable microbeams including thermal environment effect, Monotonicity of input-output mapping related to inverse elastoplastic torsional problem, Exact solution for the mode III stress fields ahead of cracks initiated at sharp notch tips, Selective and reduced numerical integrations for NURBS-based isogeometric analysis, On stability, convergence and accuracy of bES-FEM and bFS-FEM for nearly incompressible elasticity, Volume-averaged nodal projection method for nearly-incompressible elasticity using meshfree and bubble basis functions, Error estimation and \(h\) adaptive boundary elements, Composition modulation and nanophase separation in a binary epilayer, Internal variables and their sensitivities in three-dimensional linear elasticity by the boundary contour method, Extrapolated fields in the formulation of the assumed strain elements. I: Two-dimensional problems., Identification of cavities inside two-dimensional heterogeneous isotropic elastic bodies, Pseudo-division algorithm for matrix multivariable polynomial and its application, A numerical method for solving equilibrium problems of no-tension solids subjected to thermal loads, Torsional stress wave propagation in orthotropic bar of rectangular cross-section, On the optimal shape parameters of radial basis functions used for 2-D meshless methods, Scattering of Rayleigh and Stoneley waves by two adhering elastic wedges, A coupling cross-section finite element model for torsion analysis of prismatic bars., Plane infinite analytical element and Hamiltonian system, Load share and finite element stress analysis for double circular-arc helical gears, Study of orthotropic materials: The interphase model and the crack initiation, Reconstruction of contact pressures between flexible objects and rigid planes using friction data, Equilibrium of elastic rectangle: Mathieu-Inglis-Pickett solution revisited, A coupled finite element -- element-free Galerkin method, A new implementation of the element free Galerkin method, Computer-based manipulation of systems of equations in elasticity problems with Gröbner bases, Finite volume method for thermo-elasto-plastic stress analysis, Finite element derivative recovery by moving least square interpolants, Stabilization schemes for 12-node to 21-node brick elements based on orthogonal and consistently assumed stress modes, Effects of curvilinear anisotropy on radially symmetric stresses in anisotropic linearly elastic solids, Complete system of two-dimensional invariants for formulation of triangular finite element of composite shells, Optimum Young's modulus of a homogeneous cylinder energetically equivalent to a functionally graded cylinder, Thermal stresses in an elastic rectangle, A generalized formulation of elastodynamics: small on rigid, Exact analysis of curved beams and arches with arbitrary end conditions: a Hamiltonian state space approach, A note on the Legendre series solution of the biharmonic equation for cylindrical problems, Linear elastic solutions for slotted plates, On the generalized plane stress problem, the Gregory decomposition and the Filon mean method, Analysis of functionally graded rotating disks with variable thickness, Flexural-torsional buckling analysis of composite beams by BEM including shear deformation effect, Analytical solutions for solid spheres of \(\mathrm{Si}_{1-x}\mathrm{Ge}_{x}\) alloy under diametrical compression, On the stress distribution around the hole in mechanically fastened joints, Bipolar coordinates, image method and the method of fundamental solutions for Green's functions of Laplace problems containing circular boundaries, The multi-domain hybrid boundary node method for 3D elasticity, Modeling domains using Bézier surfaces in plane boundary problems defined by the Navier-Lamé equation with body forces, A three-dimensional adaptive analysis using the meshfree node-based smoothed point interpolation method (NS-PIM), Analysis of elastostatic problems using a semi-analytical method with diagonal coefficient matrices, Analytic formulations for calculating nearly singular integrals in two-dimensional BEM, Determination of a general solution of three-dimensional Lamé equations of elasticity theory, Numerical solution of solid mechanics problems using a boundary-only and truly meshless method, A boundary element sensitivity formulation for contact problems using the implicit differentiation method, Boundary reduction technique and triangular differential quadrature domain decomposition method for polygonal region, Note on the removal of rigid body motions in the solution of elastostatic traction boundary value problems by SGBEM, Complex variable boundary integral method for linear viscoelasticity. II: Application to problems involving circular boundaries, Singular integral equation method for multiple Zener-Stroh crack problems in antiplane elasticity, A pseudo-elastic local meshless method for analysis of material nonlinear problems in solids, Rapid change of stresses in thickness direction in long orthotropic tube under internal pressure and axial load, Stochastic finite elements as a bridge between random material microstructure and global response, Mechanical behavior of a \(\mu\)m-sized single crystal silicon structure with sharp notches, An improved reproducing kernel particle method for nearly incompressible finite elasticity, Meshless methods for shear-deformable beams and plates, A three-dimensional B-spline boundary element, Singular integrals and boundary elements, A reduction method for boundary element reanalysis, Local refinement with arbitrary irregular meshes and implementation in numerical manifold method, Comparison of approximation schemes for three-dimensional thermal stress analysis and applications to cracks with fluid flowing, The reduction of orthotropic bodies equations to solving the partial differential equation of the sixth order and its investigation, Analytical and experimental evaluation of stresses in elastic annuli subjected to three-point loading on the outer surface, A rapid granular chute avalanche impinging on a small fixed obstacle: DEM modeling, experimental validation and exploration of granular stress, A two-level nesting smoothed meshfree method for structural dynamic analysis, Adaptive multi-patch isogeometric analysis based on locally refined B-splines, Superconvergent gradient smoothing meshfree collocation method, A new strain smoothing method for triangular and tetrahedral finite elements, An adaptive isogeometric analysis collocation method with a recovery-based error estimator, Spatial Poisson processes for fatigue crack initiation, Isogeometric generalized \(n\)th order perturbation-based stochastic method for exact geometric modeling of (composite) structures: static and dynamic analysis with random material parameters, Conforming window functions for meshfree methods, Weak impositions of Dirichlet boundary conditions in solid mechanics: a critique of current approaches and extension to partially prescribed boundaries, Polytopal composite finite elements, A mixed formulation of B-spline and a new class of spherical Hankel shape functions for modeling elastostatic problems, A high-order numerical manifold method with continuous stress/strain field, Analytical prediction of tunneling-induced ground movements and liner deformation in saturated soils considering influences of shield air pressure, Updated Lagrangian Taylor-SPH method for large deformation in dynamic problems, An implicit boundary finite element method with extension to frictional sliding boundary conditions and elasto-plastic analyses, A nonlocal operator method for solving partial differential equations, Quasi-quadratic elements for nonlinear compressible and incompressible elasticity, A homotopy analysis solution to large deformation of beams under static arbitrary distributed load, Elastic solutions of a functionally graded cantilever beam with different modulus in tension and compression under bending loads, Nonlinear behavior of a nano-scale beam considering length scale-parameter, On the indentation of a poroelastic halfspace, Analytical solution of the problem of thermoelastic deformation of a nonuniformly rotating multilayer disk, Adaptive refinement in the meshless finite volume method for elasticity problems, Displacement field potentials for deformation in elastic media: theory and application to pressure-loaded boreholes, Veamy: an extensible object-oriented C++ library for the virtual element method, A novel node-based smoothed finite element method with linear strain fields for static, free and forced vibration analyses of solids, An element free Galerkin method based on the modified moving least squares approximation, The strain-smoothed 4-node quadrilateral finite element, Mollified finite element approximants of arbitrary order and smoothness, Non-conforming interface coupling and symmetric iterative solution in isogeometric FE-BE analysis, An accuracy analysis of Galerkin meshfree methods accounting for numerical integration, Hierarchical infills for additive manufacturing through a multiscale approach, Asymptotic analysis for plane stress problems. A classroom note, An hourglass control algorithm for Lagrangian smooth particle hydrodynamics, A coupled finite element-meshfree smoothed point interpolation method for nonlinear analysis, The method of fundamental solutions for two-dimensional elasticity problems based on the Airy stress function, Generalized complex variable boundary integral equation for stress fields and torsional rigidity in torsion problems, Analysis of thermal effect around an underground storage cavern with a combined three-dimensional indirect boundary element method, Application of the Green and the Rayleigh-Green reciprocal identities to path-independent integrals in two- and three-dimensional elasticity, Complex variable boundary element method for torsion of anisotropic bars, A numerical solution for dynamic contact problems satisfying the velocity and acceleration compatibilities on the contact surface, Evaluation of fundamental vibration frequency of an orthotropic bending plate by using an iterative approach, A full 3D finite element analysis using adaptive refinement and PCG solver with back interpolation, Application of the decomposition method to thermal stresses in isotropic circular fins with temperature-dependent thermal conductivity, A numerical method with a posteriori error estimation for determining the path taken by a propagating crack, Application of Betti's reciprocal work theorem to the construction of the hypersingular integral equation of a plane crack in three-dimensional elasticity, On the exterior crack with contact zones, Interface element method (IEM) for a partitioned system with non-matching interfaces, An integral equation method and its application to defect mechanics, On the hybrid-mixed formulation of \(C^ 0\) curved beam elements, Zur elastisch-plastischen Deformation drehsymmetrisch erhitzter Kreisscheiben, Cracks located on a single line in an orthotropic elastic medium in which body forces are acting, Least-weight design of perforated elastic plates for given compliance: Nonzero Poisson's ratio, Finite element analysis of stress concentration around a blunt crack in a Cosserat elastic solid, The motion of point defects in solids, Static and dynamic analysis of composite shear walls by the boundary element method, New improved hourglass control for bilinear and trilinear elements in anisotropic linear elasticity, Analytical solution of the quasi-static thermoelasticity problem in a pressurized thick-walled cylinder subjected to transient thermal loading, A circular elastic cylinder under its own weight, An exact theory of interfacial debonding in layered elastic composites, A new Kirchhoff plate model based on a modified couple stress theory, An investigation of convection effects in complete and almost complete contact problems, The radially nonhomogeneous elastic axisymmentric problem, A ``FE-meshfree QUAD4 element based on partition of unity, Nonuniqueness in the integral equation formulation of the biharmonic equation in multiply connected domains, Collective buckling of nonuniform nanobeams interacting through an elastic substrate, An alternative alpha finite element method (A\(\alpha \)FEM) for free and forced structural vibration using triangular meshes, Diffusion of self-equilibrating end loads in plane strain plasticity, Stream functions of certain rotating cylinders, On the determination of higher order terms of singular elastic stress fields near corners, The critical angle of the anisotropic elastic wedge subject to uniform tractions, Hemivariational inequalities for linear and nonlinear elastic materials, Pure bending of simply supported circular plate of transversely isotropic functionally graded material, Pile analysis by simple integral equation methods, The plane self-similar anisotropic and angularly inhomogeneous wedge under power-law tractions and the asymptotic analysis of the stress field, Boundary conditions for plate bending in one-dimensional hexagonal quasicrystals, Multiscale simulation method for self-organization of nanoparticles in dense suspension, Evaluation of accuracy and stability of the classical SPH method under uniaxial compression, Stabilized plane and axisymmetric Lobatto finite element models, A non-classical model for circular Kirchhoff plates incorporating microstructure and surface energy effects, A three-dimensional hybrid smoothed finite element method (H-SFEM) for nonlinear solid mechanics problems, A general approach to the solution of Boussinesq's problem for polynomial pressures acting over polygonal domains, Analysis of the effects of rigid and elastic boundary conditions in the elastic-plastic finite element analysis of rolling contact, The shrink fit consisting of elastic hollow shaft and nonlinearly hardening elastic-plastic hub, Prismatic folded plate analysis using finite strip-elements, Line element-less method (LEM) for beam torsion solution (truly no-mesh method), On numerical calculation in symplectic approach for elasticity problems, Axisymmetric elasticity solutions for a uniformly loaded annular plate of transversely isotropic functionally graded materials, The decomposed form and boundary conditions of elastic beams with free faces, Developing a formulation based upon curvature for analysis of nonprismatic curved beams, A fast finite difference method for biharmonic equations on irregular domains and its application to an incompressible Stokes flow, Differential-algebraic approach to coupled problems of dynamic thermoelasticity, Closed form stress distribution in 2D elasticity for all boundary conditions, Elasticity solution of clamped-simply supported beams with variable thickness, Near surface stress analysis strategies for axisymmetric fretting, Axisymmetric fretting analysis in coated cylinder, A note on methods for analysis of flow through microchannels, Stresses of a rotating circular disk of variable thickness carrying a current and bearing a coaxial viscoelastic coating, On an inverse thermo-elasticity problem for an infinite medium containing a cavity of unknown shape, A weak form quadrature element method for plane elasticity problems, General solutions of three-dimensional problems for two-dimensional quasicrystals, Full 3D finite element Cosserat formulation with application in layered structures, Elasticity solution of multi-span beams with variable thickness under static loads, Free vibration multiquadric boundary elements applied to plane elasticity, Axisymmetric deformation of a transversely isotropic cylindrical body: A Hamiltonian state-space approach, Cohesive modeling of crack nucleation under diffusion-induced stresses in a thin strip: implications on the critical size for flaw tolerant battery electrodes, Much ado about shear correction factors in Timoshenko beam theory, A matrix-free implicit unstructured multigrid finite volume method for simulating structural dynamics and fluid-structure interaction, Continuum aspects of the natural approach, Pore migration under high temperature and stress gradients, Deformation of elastic particles in viscous shear flow, An automatic adaptive refinement procedure for the reproducing kernel particle method. I: Stress recovery and a posteriori error estimation, Perturbation method for the solution of a Zener-Stroh crack with a slightly curved configuration, Rotating variable-thickness orthotropic cylinder containing a solid core of uniform-thickness, Three-dimensional analytical solution for a rotating disc of functionally graded materials with transverse isotropy, Exact solution of rotating FGM shaft problem in the elastoplastic state of stress, Compensation of torsion in rods by piezoelectric actuation, Determination of the body force of a two-dimensional isotropic elastic body, Path-independent integral for an elliptical hole in a plate under tension for plane stress deformation theory, A novel Galerkin-like weakform and a superconvergent alpha finite element method (S\(\alpha \)FEM) for mechanics problems using triangular meshes, Modelling and experimentation on the strength of porous ceramics, Elastic and viscoelastic solutions to rotating functionally graded hollow and solid cylinders, Model for cover cracking due to corrosion expansion and uniform stresses at infinity, Locking-free finite element methods for linear and nonlinear elasticity in 2D and 3D, MLS (moving least square)-based finite elements for three-dimensional nonmatching meshes and adaptive mesh refinement, Extended parametric meshless Galerkin method, A subdomain collocation method based on Voronoi domain partition and reproducing kernel approximation, Analysis of 3D solids using the natural neighbour radial point interpolation method, An explicit-form solution to the plane elasticity and thermoelasticity problems for anisotropic and inhomogeneous solids, A numerical study on the solution of the Cauchy problem in elasticity, Constitutive equations for porous plane-strain gradient elasticity obtained by homogenization, Magnetoelectroelastic fields in rotating multiferroic composite cylindrical structures, A novel virtual node method for polygonal elements, Lamina Emergent Torsional (LET) joint, A unified graphical approach to the static analysis of axially loaded structures, Contact between an elastically supported circular plate and a rigid indenter, Analytic solution in complex form for a class of elastic moduli for a two-dimensional inhomogeneity of a body, Notes on the relationship between symmetric plane strain and torsion-free axi-symmetric problems, Flexure of beams with certain curvilinear cross sections, On the theory of stress-assisted diffusion. II, Rotational fluid flow using a least squares collocation technique, A new method for the coupling of finite element and boundary element discretized subdomains of elastic bodies, Thermal stress in an elastic-plastic disk exposed to a circular heat source, The wedge subjected to tractions: A paradox re-examined, Dynamic impact of an elastically supported beam - Large area contact, An assesment of higher-order isoparametric elements for solving an elastic problem, Stress-strain behavior for curved exponential strips, The rotating elastic-plastic shrink fit with hardening, Local boundary integral equation analysis of elastostatics problems using series expansions, Some Phragmén-Lindelöf type results for the biharmonic equation, Notes on the nonlinearly elastic Boussinesq problem, An adaptive procedure based on background cells for meshless methods, Wrinkling of the oxide scale on an aluminum-containing alloy at high temperatures, Water reservoir loading of long anisotropic valleys with irregular topographies, The measurement of bulk viscosity and the elastic-viscous analogy, Hamiltonian system and the Saint-Venant problem in elasticity, Admissible approximations for essential boundary conditions in the reproducing kernel particle method, A variational principle for fluid mechanics, Elliptic integrals and the Schwarz-Christoffel transformation, No-tension solids in the presence of thermal expansion: An explicit solution, A method for contact problems using virtual elements, An 8-node brick element with mixed formulation for large deformation analyses, Treatment of initial deformations in the integrated force method, Meshless methods: An overview and recent developments, An \(h\)-\(p\) adaptive method using clouds, Enforcement of essential boundary conditions in meshless approximations using finite elements, Asymptotic fields at tip of conical notches and inclusions in a power hardening solid, Consistent pseudo-derivatives in meshless methods, An integral equation analysis of inelastic shells, Some quasistationary contact problems for half-space involving heat generation and radiation, On the bending of pretwisted bars by a terminal transverse load, Frictional slip between a layer and a substrate caused by a normal load, Exterior interface cracks, The mechanisms of ground surface subsidence above compacting multiphase reservoirs and their analysis by the finite element method, Hertzian impact of two elastic spheres in the presence of surface damping, T-stress, mixed-mode stress intensity factors, and crack initiation angles in functionally graded materials: A unified approach using the interaction integral method., A mesh-based partition of unity method for discontinuity modeling, Solution of some symmetrical plane thermal problems by the boundary point least squares method, On the linearly hardening rotating solid shaft., A matrix triangularization algorithm for the polynomial point interpolation method., Coupling of the mesh-free finite cloud method with the boundary element method: a collocation approach., Elastoplastic deformations of rotating parabolic solid disks using Tresca's yield criterion, [müMAD, the adhesion based dynamic micro-manipulator], A coupled finite element and meshless local Petrov--Galerkin method for two-dimensional potential problems., An old elasticity problem in a unilateral setting, An assessment of the boundary integral equation method for in-plane elastostatic problems, The elastostatic problem of an infinite strip containing a periodic row of line cracks, The wedge subjected to tractions: a paradox resolved, Structural representations in the mechanics of elasto-plastic strains, Spread of plasticity from cuspidal points of rigid inclusions, Maximum principles and bounds on stress concentration factors in the torsion of grooved shafts of revolution, New implementation of the tau method for PDEs., A radial boundary node method for two-dimensional elastic analysis., A simple Kelvin and Boltzmann viscoelastic analysis of three-dimensional solids by the boundary element method., Hybrid boundary point interpolation methods and their coupling with the element free Galerkin method., Research on a systematic methodology for theory of elasticity, Local Heaviside weighted MLPG meshless method for two-dimensional solids using compactly supported radial basis functions., Dynamic solid mechanics using finite volume methods, Hardness trends in micron scale indentation, Assumed strain stabilization of the 4-node quadrilateral with 1-point quadrature for nonlinear problems, Mixed spatial problems of elasticity theory with a circular line separating the boundary conditions, The exact integral equation of Hertz's contact problem, Some anomalies of the curved bar problem in classical elasticity, Elastic moduli of composites with rigid sliding inclusions, Exact solutions for stress analysis of transversely isotropic elastic layers, On the uncoupled problem of stress-assisted diffusion through a linear elastic solid, Second-order design sensitivity analysis for linear elastic problems by the derivative boundary element method, Four-node axisymmetric element based upon the Hellinger-Reissner functional, Elastic fields due to centers of dilatation and thermal inhomogeneities in plane-layered solids, An automatic coarse and fine surface mesh generation scheme based on medial axis transform. II: Implementation, On edge effects for the semi-infinite plate, Eigenfunction solution for the plane stress problems of curved beams, A simplified derivation of Kolosov's theorem of the complex formulation of plane elasticity, Initial value treatment for torsion of an elastic layer, Axi-symmetric problems in elastic materials of grade two, Solution of the plane end problem for a semi-infinite elastic strip, Upper and lower bounds for the shear stress in the Saint-Venant theory of flexure, Numerical solution of Poisson's equation using curvilinear finite differences, Boundary-layer analysis of propagating mode II cracks in porous elastic media, A discrete probabilistic model for mechanical response of a granular medium, Left ventricular wall and fluid dynamics of cardiac contraction, A comparative study of elasticity, shell and boundary layer solutions applied to axially compressed cylinders, On bounds for the torsional stiffness of shafts of varying circular cross section, IFECS - an interactive finite element computing system, Elastoplastic torsion by quadratic programming, Plane entry flows and energy estimates for the Navier-Stokes equations, A practical method for limit torsion problems, Adhesive contact during the oblique impact of elastic spheres, Aspects of an adaptive \(hp\)-finite element method: Adaptive strategy, conforming approximation and efficient solvers, The hypersingular boundary contour method for two-dimensional linear elasticity, Wave propagation in poro-acoustic media, A new error indicator based on stresses for adaptive meshing with Hermite boundary elements, Adaptivity and convergence in the Voronoi cell finite element model for analyzing heterogeneous materials, Extrapolated fields in the formulation of the assumed strain elements. II: Three-dimensional problems, A multiple-quadrature eight-mode hexahedral finite element for large deformation elastoplastic analysis, Improved finite element methods for elastic waves, Surface variables and their sensitivities in three-dimensional linear elasticity by the boundary contour method, BEC: A 2-node fast converging shear-deformable isotropic and composite beam element based on 6 rigid-body and 6 straining modes, Evaluation of gradients on the boundary using fully regularized hypersingular boundary integral equations, Adaptive grid optimization for structural analysis -- Geometry-based approach, A compatible boundary element method for plane elasticity and fracture mechanics, The use of quaternions to generalize the Kolosov-Muskhelishvili method to three-dimensional problems of the theory of elasticity, Solution of the problem of the pure torsion and simple bending of a rectilinearly anisotropic cantilever by a transverse force, Plane strain asymptotic fields of a crack growing along an elastic- elastic power-law creeping bi-material interface, Effective elastic properties for a periodic bicontinuous porous medium, Low-velocity impact of laminated composites using a layerwise theory, Real functions for representation of rigid solids, Effect of a gradient heating on the stress-strain state of a plate, Equilibrium of an elastic finite cylinder under axisymmetric discontinuous normal loadings, Elastoplastic deformation of nonhomogeneous plates, Gradient-enriched finite element methodology for axisymmetric problems, Three-dimensional stress and free vibration analyses of functionally graded plates with circular holes by the use of the graded finite element method, Assumed strain stabilization of the eight node hexahedral element, On solution strategies to Saint-Venant problem, The Boussinesq problem in dipolar gradient elasticity, Lamé's strain potential method for plane gradient elasticity problems, Two-dimensional complete rational analysis of functionally graded beams within symplectic framework, An efficient nesting sub-domain gradient smoothing integration algorithm with quadratic exactness for Galerkin meshfree methods, Controller design for flexible structure vibration suppression with robustness to contacts, Development of an object-oriented finite element program with adaptive mesh refinement for multi-physics applications, Nonlocal damage theory in hybrid-displacement formulations, A meshless integral method based on regularized boundary integral equation, A finite volume method for incompressible linear elasticity, A novel alpha finite element method (\(\alpha \)FEM) for exact solution to mechanics problems using triangular and tetrahedral elements, Position-thickness-dependent stresses and stress-induced diffuse dielectric anomaly in perovskite ferroelectric films, A stabilized least-squares radial point collocation method (LS-RPCM) for adaptive analysis, Closed-form solution for a coated circular inclusion under uniaxial tension, Strain gradient solution for the Eshelby-type anti-plane strain inclusion problem, A numerical study of a plate with a hole for a new class of elastic bodies, Construction of \(n\)-sided polygonal spline element using area coordinates and B-net method, Incompatible numerical manifold method for fracture problems, A novel twice-interpolation finite element method for solid mechanics problems, Three types of meshless finite volume method for the analysis of two-dimensional elasticity problems, Size effect in the bending of a Timoshenko nanobeam, Elasticity solutions for a transversely isotropic functionally graded annular sector plate, A non-classical Kirchhoff rod model based on the modified couple stress theory, Subdivision based mixed methods for isogeometric analysis of linear and nonlinear nearly incompressible materials, Bézier extraction and adaptive refinement of truncated hierarchical NURBS, Initiation of fluid-induced fracture in a thick-walled hollow permeable sphere, Phenomenological invariants and their application to geometrically nonlinear formulation of triangular finite elements of shear deformable shells, Stress concentration around a hole in a radially inhomogeneous plate, Effect of inhomogeneity on the stress in pipes, An imbricate finite element method (I-FEM) using full, reduced, and smoothed integration, Subdomain-based error techniques for generalized finite element approximations of problems with singular stress fields, Two-dimensional elastostatic analysis using Coons-Gordon interpolation, Free torsion of thin-walled structural members of open- and closed-sections, Exponential basis functions in solution of problems with fully incompressible materials: a mesh-free method, A new homogenization method based on a simplified strain gradient elasticity theory, A micromechanics based multiscale model for nonlinear composites, On the assumptions of the generalized plane stress problem and the filon average, A geometric structure-preserving discretization scheme for incompressible linearized elasticity, A geometric multiscale finite element method for the dynamic analysis of heterogeneous solids, Meshless methods in dual analysis: theoretical and implementation issues, A sub-domain RPIM with condensation of degree of freedom, A new Bernoulli-Euler beam model incorporating microstructure and surface energy effects, Arbitrarily smooth generalized finite element approximations, Periodic points for two-dimensional Stokes flow in a rectangular cavity, Problems of the Flamant-Boussinesq and Kelvin type in dipolar gradient elasticity, Modelling of contact deformation for a pinch gripper in automated material handling, Analytical solution for spatially axisymmetric problem of thick-walled cylinder subjected to different linearly varying pressures along the axis and uniform pressures at two ends, A stress scale in full-field identification procedures: a diffuse stress gauge, A locking-free meshless local Petrov-Galerkin formulation for thick and thin plates, Exact integration for stress evaluation in the boundary element analysis of two-dimensional elastostatics, Exact integrations of two-dimensional high-order discontinuous boundary elements of elastostatics problems, An inverse stress reconstruction algorithm for modelling excavation and thermo-mechanical effects of rock structures, The method of fundamental solutions with dual reciprocity for some problems in elasticity, Boundary meshfree methods based on the boundary point interpolation methods, A Wachspress meshless local Petrov-Galerkin method, The role of constraint in the fields of a crack normal to the interface between elastically and plastically mismatched solids, An improved interface element with variable nodes for non-matching finite element meshes, Boundary contour analysis for surface stress recovery in 2-D elasticity and Stokes flow, The anisotropic and angularly inhomogeneous elastic wedge under a monomial load distribution, The refined theory of deep rectangular beams based on general solutions of elasticity, Elasticity solutions for functionally graded annular plates subject to biharmonic loads, An adaptive three-dimensional RHT-splines formulation in linear elasto-statics and elasto-dynamics, Variational formulation of curved beams in global coordinates, Dynamic contact analysis technique for rapidly sliding elastic bodies with node-to-segment contact and differentiated constraints, A temporal stable node-based smoothed finite element method for three-dimensional elasticity problems, A displacement smoothing induced strain gradient stabilization for the meshfree Galerkin nodal integration method, The finite circular disc with a central elliptic hole under parabolic pressure, Masonry walls strengthened with composite materials - dynamic out-of-plane behavior, An efficient adaptive analysis procedure using the edge-based smoothed point interpolation method (ES-PIM) for 2D and 3D problems, Smoothed Galerkin methods using cell-wise strain smoothing technique, Mixed discrete least squares meshless method for planar elasticity problems using regular and irregular nodal distributions, Elastostatic invariance in the composite plane, Exact solution for the stress concentration in a slot, A 3D BEM/FEM formulation for the static analysis of piled rafts and capped pile groups subjected to vertical and horizontal loads, Novel quadtree algorithm for adaptive analysis based on cell-based smoothed finite element method, Antiplane shear stresses in orthotropic plates with lateral blunt notches, Smoothing and accelerated computations in the element free Galerkin method, Estimated error bounds for finite element solutions of elliptic boundary value problems, A variation of local point interpolation method (\(v\)LPIM) for analysis of microelectromechanical systems (MEMS) device, Mathematical physics branches: identifying mixed type equations, Symmetric Galerkin boundary element computation of \(T\)-stress and stress intensity factors for mixed-mode cracks by the interaction integral method, The general solution for dynamical problem of rectangular micro-polar beam vibrating at high frequency, Dual-support smoothed particle hydrodynamics in solid: variational principle and implicit formulation, Three-dimensional MLS-based numerical manifold method for static and dynamic analysis, Generalized mathematical model for the solution of mixed-boundary-value elastic problems, A MLPG(LBIE) approach in combination with BEM, An \(h\)-adaptive modified element-free Galerkin method, Generalization of the multi-scale finite element method to plane elasticity problems, A refined beam theory based on the refined plate theory, Scale effects on nonlocal buckling analysis of bilayer composite plates under non-uniform uniaxial loads, Statics of FGM circular plate with magneto-electro-elastic coupling: axisymmetric solutions and their relations with those for corresponding rectangular beam, The displacement boundary conditions for Reddy higher-order shear cantilever beam theory, Disturbed elastic fields in a circular 2D finite domain containing a circular inhomogeneity and a finite interfacial zone, Nonlinear three-dimensional beam theory for flexible multibody dynamics, CVBEM solution for De Saint-Venant orthotropic beams under coupled bending and torsion, On the positive definiteness of the Poincaré-Steklov operator for elastic half-plane, Asymptotic closed-form solutions including boundary-layers for orthotropic beams, Hellinger-Reissner principle based stress-displacement formulation for three-dimensional isogeometric analysis in linear elasticity, Blended isogeometric-finite element analysis for large displacements linear elastic fracture mechanics, Isogeometric analysis using a tensor product blending spline construction, Reduction of the two-dimensional thermoelasticity problems for solids with corner points to key integrodifferential equations, A NURBS-based degenerated stiffener element for isogeometric static and buckling analysis, Generalized Tresca yield condition as a family of elliptic curves with application to mode I crack problems, Fundamental solutions of critical wedge angles for one-dimensional piezoelectric quasicrystal wedge, An inherently consistent reproducing kernel gradient smoothing framework toward efficient Galerkin meshfree formulation with explicit quadrature, A smoothed finite element method for octree-based polyhedral meshes with large number of hanging nodes and irregular elements, Resolving high frequency issues via proper orthogonal decomposition based dynamic isogeometric analysis for structures with dissimilar materials, Equivalent method of evaluating mechanical properties of perforated Ni-based single crystal plates using artificial neural networks, On a planar theory of a discrete nonlinearly elastic rod, A new approach for nonmatching interface construction by the method of localized Lagrange multipliers, Shear wave velocity in sand considering the effects of frequency based on particle contact theory, Boundary element formulation of axisymmetric problems in vertically non-homogeneous solids subject to normal traction, A new error estimation technique for solving torsion bar problem with inclusion by using BEM, The role of mechanical host-tumour interactions in the collapse of tumour blood vessels and tumour growth dynamics, A rotating elastic cylinder moving on an elliptic orbit, Extension of a piecewise uniform composite rod, Generalization of plane stress and plane strain states to elastic plates of finite thickness, WEB-spline finite elements for the approximation of Navier-Lamé system with \(C_{A, B}\) boundary condition, Solitary waves in morphogenesis: determination fronts as strain-cued strain transformations among automatous cells, An element-free smoothed radial point interpolation method (EFS-RPIM) for 2D and 3D solid mechanics problems, On stresses of a strip under concentrated loads at longitudinal borders, Elastic analysis for rotating functionally graded annular disk with exponentially-varying profile and properties, On the Kelvin, Boussinesq, and Mindlin problems, Durable pyroelectric shell structures for energy scavenging applications, Saint-Venant end effects in the plane problem for linearly elastic functionally graded materials, A coupling method of non-ordinary state-based peridynamics and finite element method, The torsional centre position of stocky beams with arbitrary noncircular cross-sectional shapes and with arbitrary elastic material properties, The application of complex potentials to the problems of plane stress state for an inhomogeneous material, On the Flamant problem for a half-plane loaded with a concentrated force, A non-classical model for circular cylindrical thin shells incorporating microstructure and surface energy effects, Determination of the spherical part of the couple-stress in a polar fibre-reinforced elastic plate subjected to pure bending, An effective general solution to the inhomogeneous spatial axisymmetric problem and its applications in functionally graded materials, Towards a general interpolation scheme, Mixed dimensional isogeometric FE-be coupling analysis for solid-shell structures, Comprehensive solutions for underwater tunnels in rock masses with different GSI values considering blast-induced damage zone and seepage forces, A strain-constructed point interpolation method and strain field construction schemes for solid mechanics problems using triangular mesh, Elastic analysis of a circumferential crack in an isotropic curved beam using the modified mapping-collocation method, On the influence of adhesive stress-separation laws on elastic stress singularities, Elastic analysis of thick-walled pressurized spherical vessels coated with functionally graded materials, A new Timoshenko beam model incorporating microstructure and surface energy effects, The analysis of eigenstrains outside of an ellipsoidal inclusion, Analytical solution to the bending of a nonlinearly hardening wide curved bar, A novel four-node quadrilateral element with continuous nodal stress, Meshless solutions of 2D contact problems by subdomain variational inequality and MLPG method with radial basis functions, Trefftz interpolation based multi-domain boundary point method, Development of hybrid boundary node method in two-dimensional elasticity, Torsion and flexure analysis of orthotropic beams by a boundary element model, Boundary point method for linear elasticity using constant and quadratic moving elements, Coupled longitudinal-transverse-rotational free vibration of post-buckled functionally graded first-order shear deformable micro- and nano-beams based on the Mindlin's strain gradient theory, A combined FEM and three-dimensional asymptotic solution based analysis on stress concentration/intensity around elliptical/circular cylinder shaped surface flaws in stretched plates, Numerical approximation strategy for solutions and their derivatives for two-dimensional solids, A \(C^0 / G^1\) multiple patches connection method in isogeometric analysis, Spatial ANCF/CRBF beam elements, Transient analysis of diffusion-induced stress: effect of solid reaction, A correspondence between compressible and incompressible plane elastostatics, 3D elasticity solutions for stress field analysis of FGM circular plates subject to concentrated edge forces and couples, A new low-cost meshfree method for two and three dimensional problems in elasticity, Fractional description of time-dependent mechanical property evolution in materials with strain softening behavior, Analysis of geometric dispersion effect of impact-induced transient waves in composite rod using dynamic substructure method, A fourth-order finite volume method for structural analysis, 2-D elasticity solutions of two-layer composite beams with an arbitrarily shaped interface, A variational approach for large deflection of ends supported nanorod under a uniformly distributed load, using intrinsic coordinate finite elements, A rotating cylinder in a bored dissimilar elastic solid, Frictional impact analysis of an elastoplastic multi-link robotic system using a multi-timescale modelling approach, Dynamic modeling of a gear transmission system containing damping particles using coupled multi-body dynamics and discrete element method, Analytical solutions of functionally graded curved beams under an arbitrarily directed single force, A mixed three-node triangular element with continuous nodal stress for fully dynamic consolidation of porous media, A penalty-based multifiber finite element model for coupled bending and torsional-warping analysis of composite beams, An efficient mesh-free approach for the determination of stresses intensity factors, A numerical integration strategy of meshless numerical manifold method based on physical cover and applications to linear elastic fractures, Quadrilateral-area-coordinate-based numerical manifold method accommodating static and dynamic analysis, Application of the variational method of homogeneous solutions for the optimal control of the axisymmetric thermoelastic state of a cylinder, Problem of thermoelasticity for a cylinder with thin multilayer coating, A weak-form RBF-generated finite difference method, Quadratic splines on quad-tri meshes: construction and an application to simulations on watertight reconstructions of trimmed surfaces, An efficient patch-to-patch method for coupling independent finite element subdomains with intersecting interfaces, Adaptive mesh refinement strategies in isogeometric analysis -- a computational comparison, Transient-thermoelastic analysis of periodically rotated functionally graded hollow cylinder, Reproducing kernel formulation of B-spline and NURBS basis functions: a meshfree local refinement strategy for isogeometric analysis, Mathematical modeling of local perfusion in large distensible microvascular networks, A scaled boundary finite element method for modelling crack face contact problems, Variational approach for settlement analysis of circular plate on multilayered soil, A coupling approach of state-based peridynamics with node-based smoothed finite element method, The approximate solution of the elastic torsion problem of uniform bar with arbitrary cross-section, The `effective modulus' in cubic single crystals subjected to full transverse constraint, Stress distributions in orthotropic solids with blunt notches under in-plane shear loadings, A novel hybrid technique to decompose in-plane thermoelastic displacement fields into thermal and structural displacement fields, Investigation of the thermal stressed state of a hydrogen recovery reactor, A coupled model of controlled synthesis, of a composite on a substrate, A new explicit solution for the mode I stress fields in notched orthotropic solids, \(n+1\) Integration scheme for polygonal elements using Richardson extrapolation, The modified generalized Tresca yield condition with application to mode I perfectly plastic crack problems, Analytical solutions for multilayered pipes with temperature-dependent properties under non-uniform pressure and thermal load, Analytical approach to estimating the influence of friction slip contact between surrounding rock and concrete lining on mechanical response of deep rheological soft rock tunnels, On the spectra of three Steklov eigenvalue problems on warped product manifolds, Some New Results on the Bending of a Circular Plate Subject to a bansverse Point Force, ON THE COMPUTATION METHOD FOR THE STRESS INTENSITY FACTOR OF A STATIONARY CRACK IN MODE I UNDER DYNAMIC LOADING, MESHFREE METHODS AND THEIR COMPARISONS, A LINEARLY CONFORMING POINT INTERPOLATION METHOD (LC-PIM) FOR 2D SOLID MECHANICS PROBLEMS, Unnamed Item, A Smoothed GFEM Based on Taylor Expansion and Constrained MLS for Analysis of Reissner–Mindlin Plate, Stokes flow in a rectangular cavity by rotlet forcing, EFFICIENT SIMULATION OF 3‐D STRESS DISTRIBUTIONS AT TRENCH STRUCTURES CAUSED BY THERMAL MISMATCH OF TRENCH FILLING AND SILICON SUBSTRATE, A coupled model of composite synthesis in combustion regime, A modified stable node-based smoothed finite element method based on low-quality unstructured mesh, \(h\)-adaptive radial basis function finite difference method for linear elasticity problems, Exact solutions for plane stress problems of piezoelectric semiconductors: tuning free-carrier motions by various mechanical loadings, Machine Learning Surrogate Modeling for Meshless Methods: Leveraging Universal Approximation, An Element Decomposition Method for Three-Dimensional Solid Mechanics, Blending spline surfaces over polygon mesh and their application to isogeometric analysis, A class of shear deformable isotropic elastic plates with parametrically variable warping shapes, On modeling of a thickness‐shear vibrating quartz crystal plate attached with micro‐beams immersed in liquid with considering couple stress effects, Radial heating of a thick‐walled cylindrically curved FGM‐panel, Thermal loading and unloading of a solid cylinder subjected to periodic internal energy cycling, Solving ill-posed problems of the theory of elasticity using high-performance computing systems, A non-classical model for first-ordershear deformation circular cylindrical thin shells incorporating microstructure and surface energy effects, A node‐based uniform strain virtual element method for compressible and nearly incompressible elasticity, A micromorphic approach to stress gradient elasticity theory with an assessment of the boundary conditions and size effects, Generalized surface Green's functions for an elastic half-space, Improved SNS-PFEM framework with dual mortar method to model geotechnical large deformation contact problems, Contact behavior between rail and elastic foundation, Plane stress asymptotic solution for steady crack growth in an elastic/perfectly plastic solid for mode I crack propagation, Mesh stiffness modelling and dynamic simulation of helical gears with tooth crack propagation, A reasonable solution to the elastic problem of half-plane, Solution to boundary value problems on linear elastic confocal elliptic domain based on collocation technique, Arbitrary mesh‐moving velocity‐based space‐time finite element method for large deformation analysis of solids, Construction of a new class of quadrilateral spline elements based on the scaled boundary coordinates, Determination of the spherical couple-stress in polar linear isotropic elasticity, Penalty-free any-order weak Galerkin FEMs for linear elasticity on quadrilateral meshes, Stabilization-free virtual element method for plane elasticity, Nonclassical Cosserat bending deformation of foams via holographic interferometry, Elastic-plastic stresses in a rotating disc of transversely isotropic material fitted with a shaft and subjected to thermal gradient, Equivalent theories and tension properties of semi-reentrant structures, Dynamic characteristics of helical gears incorporating the effects of coupled sliding friction, A consistent projection integration for Galerkin meshfree methods, Improvement of Linear Tetrahedral Element Performance by Using Substructuring Method, B-bar virtual element method for nearly incompressible and compressible materials, On poro-hyperelastic torsion, On an analogy between two plane problems of mechanics in a ring, Approximation of the elastic deformation of a thin cylinder, Unnamed Item, Three-Dimensional Finite Element Modelling of Free Vibrations of Functionally Graded Sandwich Panels, A note on the compatibility equations for three-dimensional axisymmetric problems, A new Bernoulli–Euler beam model based on a reformulated strain gradient elasticity theory, Study of the stress–strain state of spongy bone around an implant under occlusal load, Dimensioning of thick-walled spherical and cylindrical pressure vessels, A Moving Kriging Interpolation Meshfree Method Based on Naturally Stabilized Nodal Integration Scheme for Plate Analysis, On the non-uniqueness of solution in surface elasticity theory, A geophysical application of an elastostatic contact problem, Analytical solution for fixed-end beam subjected to uniform load, Elastic-Plastic Analysis for Functionally Graded Thick-Walled Tube Subjected to Internal Pressure, A Cohesive Law for Carbon Nanotube/Polymer Interface Accounting for Chemical Covalent Bonds, Oblique Impacts and Rebounds of Lennard-Jones Clusters on Solid Surfaces, On the Surface Displacement of an Isotropic Elastic Halfspace Containing an Inextensible Membrane Reinforcement, On the Factors Affecting the Accuracy and Robustness of Smoothed-Radial Point Interpolation Method, Asymptotics of eigen-oscillations of a massive elastic body with a thin baffle, EDGE-BASED SMOOTHED POINT INTERPOLATION METHODS, A NORMED G SPACE AND WEAKENED WEAK (W2) FORMULATION OF A CELL-BASED SMOOTHED POINT INTERPOLATION METHOD, Regularization of nearly hypersingular integrals in the boundary element method, An Immersed Meshfree Galerkin Approach for Particle-Reinforced Composite Analysis, Shape sensitivity analysis and shape optimization in planar elasticity using the element-free Galerkin method, Symbolic computation of longitudinal impact waves, Regularized spectral multipole BEM for plane elasticity, Classical and recent formulations for linear elasticity, Vibrations of a Rectangular Bridge as an Isotropic Plate under a Traveling Full Vehicle Model, Vibrations of a Rectangular Bridge as an Isotropic Plate under a Traveling Full Vehicle Model, Stability of a gradient elastic beam compressed by non-conservative forces, Error estimation using hypersingular integrals in boundary element methods for linear elasticity., A new error indicator based on stresses for three-dimensional elasticity., The meshless hypersingular boundary node method for three-dimensional potential theory and linear elasticity problems., Small-on-Large Theory with Applications to Granular Materials and Fluid/Solid Systems, Transient temperature and elastic response of a space-based mirror in the radiation-conduction environment, On Stress Concentration on Edges of Defect Holes in Plates and Critical Issues on Filling-in Repairs, Adaptive mixed finite element method for Reissner-Mindlin plate, Particle interactions in a dense monosized granular flow, Torsion of compound cross-sections with imperfect interface, The role of higher-order eigenfields in elastic-plastic cracks, Improved engineering theory for uniform beams, Continuous meshless approximations for nonconvex bodies by diffraction and transparency, Elliptic cavity in a three-dimensional anisotropic body with inclined strata deformed by line loads and dislocations, Viscoelastic Deformation of the Rotating Inhomogeneous Variable Thickness Solid and Annular Disks, A Meshless Local Petrov-Galerkin (MLPG) Approach Based on the Regular Local Boundary Integral Equation for Linear Elasticity, On a surface wave in an elastic body subject to antiplane deformation, Adaptive Finite Element Method of Lines with Local Mesh Refinement in Maximum Norm Based on Element Energy Projection Method, О методе ортогональных проекций в теории упругости, Интегро-дифференциальные уравнения второй краевой задачи линейной теории упругости. Сообщение 1. Однородное изотропное тело, A Novel Triangular Prism Element Based on Smoothed Finite Element Method, Асимптотические методы нелинейной механики разрушения: результаты, современное состояние и перспективы, Evolution of Pulse and Periodic Elastic Waves in Media with Quadratically-Bimodular Nonlinearity, A Fully Automatic h-Adaptive Analysis Procedure Using the Edge-Based Smoothed Point Interpolation Method, Development of a Software Package of Smoothed Finite Element Method (S-FEM) for Solid Mechanics Problems, A Novel Alpha Smoothed Finite Element Method for Ultra-Accurate Solution Using Quadrilateral Elements, Solution of the Beltrami Equations for the Infinite Hollow Cylinder under the Axisymmetric Deformation, MATHEMATICAL MODEL FOR ANALYSIS OF TRANSLATIONAL DISPLACEMENTS OF TOOTH ROOT, Meshfree Approach for the Torsional Analysis of Non-Circular Orthotropic and Functionally Graded Sections, Shear-induced wrinkling in accelerating thin elastic discs, A Fast Implementation of the Linear Bond-Based Peridynamic Beam Model, On the construction of second-to-fourth-order accurate approximations of spatial derivatives on an arbitrary set of points, Analytical Solution for a Pressurized Thick-Walled Spherical Shell Based on a Simplified Strain Gradient Elasticity Theory, An Elasto-Plastic Analytical Solution for the Shrink-Fit Problem with a Thin Strain-Hardening Hub and an Elastic Solid Shaft, An Exact Elastoplastic Solution for the Plane Wedge Problem of an Elastic Linear-Hardening Material, Investigation of the stresses occurring in the nonstationary perturbation of an axisymmetric cavity surface, Stress distribution in the phases of a composite material, loaded along the boundaries of inclusions, partially protruding above a matrix, A GENERALIZED GRADIENT SMOOTHING TECHNIQUE AND THE SMOOTHED BILINEAR FORM FOR GALERKIN FORMULATION OF A WIDE CLASS OF COMPUTATIONAL METHODS, MESHFREE CELL-BASED SMOOTHED POINT INTERPOLATION METHOD USING ISOPARAMETRIC PIM SHAPE FUNCTIONS AND CONDENSED RPIM SHAPE FUNCTIONS, Modelling the Mechanical Behaviour of a Pharmaceutical Tablet Using PDEs, Unnamed Item, \(\overline {\text B}\) and \(\overline {\text F}\) projection methods for nearly incompressible linear and nonlinear elasticity and plasticity using higher-order NURBS elements, Isogeometric structural shape optimization, Finite Deformation Contact Based on a 3D Dual Mortar and Semi-Smooth Newton Approach, Three dimensional boundary element implicit differentiation formulation for design sensitivity analysis, [https://portal.mardi4nfdi.de/wiki/Publication:3727488 �ber den Schubmittelpunkt], Аналитические решения квазистатических задач термоупругости с переменными физическими свойствами среды, On the stress field in a half-plane covered by the pre-stretched layer under the action of arbitrary linearly located time-harmonic forces, 3D analytical solution for a rotating transversely isotropic annular plate of functionally graded materials, Application of the Solution Structure Method in Numerically Solving Poisson’s Equation on the Basis of Atomic Functions, Reflection of a stepped plane pressure wave from a convex cylindrical cavity, A Three-Dimensional Comparative Study of the Isoparametric Graded Boundary and Finite Element Methods for Nonhomogeneous FGM Plates with Eccentric Cutouts, Basic Equations of the Linearized Theory of Elasticity: a Brief Review, Influence of the solid shape on the solution for the uncoupled quasi-static cyclic thermoelasticity problem in a thermal layer (using regular solids as example), Bending and free vibrational analysis of bi-directional functionally graded beams with circular cross-section, Application of the method of ray series to the investigation of axisymmetric nonstationary problems of the dynamical theory of elasticity, Extension of Castigliano's method for isotropic beams, Peridynamics for geometrically nonlinear analysis of three-dimensional beam structures, Method of fast expansions for solving nonlinear differential equations, Unnamed Item, Unnamed Item, An edge center-based strain-smoothing triangular and tetrahedral element for analysis of elasticity, Investigation and application of the domain decomposition method for simulating fuel elements, Deformation and Stress Analysis of an Anisotropic Rotating Annular Disk, The enhanced assumed strain method for the isogeometric analysis of nearly incompressible deformation of solids, The natural radial element method, An edge-based smoothed finite element method for 3D analysis of solid mechanics problems, Stabilization-free serendipity virtual element method for plane elasticity, A computationally efficient isoparametric tangled finite element method for handling inverted quadrilateral and hexahedral elements, Effect of Poisson's ratio on the indentation of open cell foam, An isogeometric design-analysis-optimization workflow of stiffened thin-walled structures via multilevel NURBS-based free-form deformations (MNFFD), A concise analytical treatment of elastic‐plastic bending of a strain hardening curved beam, Size effects of the nonlinear resonance analysis of a microbeam under time delay feedback control, Application of the conjugate gradient method to solving discrete contact problems for an elastic half-plane, Internal stresses and structural defects in nanowires, A NOVEL QUADRATIC EDGE-BASED SMOOTHED CONFORMING POINT INTERPOLATION METHOD (ES-CPIM) FOR ELASTICITY PROBLEMS, AN EXPLICIT SMOOTHED FINITE ELEMENT METHOD (SFEM) FOR ELASTIC DYNAMIC PROBLEMS, ON CONTINUOUS ASSUMED GRADIENT ELEMENTS OF SECOND ORDER, A HYBRID SMOOTHED FINITE ELEMENT METHOD (H-SFEM) TO SOLID MECHANICS PROBLEMS, MESHFREE CELL-BASED SMOOTHED ALPHA RADIAL POINT INTERPOLATION METHOD (CS-α RPIM) FOR SOLID MECHANICS PROBLEMS, THE BOUNDARY ELEMENT METHOD, MESHLESS FINITE VOLUME METHOD WITH SMOOTHING, A Boundary Enhancement for the Stabilized Conforming Nodal Integration of Galerkin Meshfree Methods, A Smoothed Particle Galerkin Formulation for Extreme Material Flow Analysis in Bulk Forming Applications, A Quasi-Conforming Point Interpolation Method (QC-PIM) for Elasticity Problems, Axial Buckling and Dynamic Stability of Functionally Graded Microshells Based on the Modified Couple Stress Theory, Investigation of the errors of fast trigonometric interpolation in solving the problem of stresses in a bar, METHOD ON HOLOMORPHIC VECTOR FUNCTIONS AND APPLICATIONS IN TWO-DIMENSIONAL QUASICRYSTALS, Simulation of slowly dragging a cylinder through a confined pressurized bed of granular materials using the discrete element method, Divergent integral appearing in Fourier‐transform applications in elasticity, Determination of Stresses from the Stress Trajectory Pattern in a Plane Elastic Domain, Unnamed Item, Unnamed Item, 2D unstructured mesh generation for oceanic and coastal tidal models from a localized truncation error analysis with complex derivatives, Unnamed Item, An exact dual-integral formulation of the indentation of finite, free-standing, end-supported adhesive elastic layers, Unnamed Item, REINFORCEMENT OF THE POISSON EQUATION BY A THIN LAYER, Stress concentration factors due to the bending of a thick plate with circular hole, Stressed state of anisotropic shells of revolution with transverse shear, The solution of the boussinesq problem for a half-space whose modulus of elasticity is a power function of the depth, Variational principle for nonsteady multicomponent continuum system, Application of the Trefftz method in plane elasticity problems, A LINEARLY CONFORMING RADIAL POINT INTERPOLATION METHOD FOR SOLID MECHANICS PROBLEMS, A PU-BASED 4-NODE QUADRATIC TETRAHEDON AND LINEAR DEPENDENCES ELIMINATION IN THREE-DIMENSIONS, THE UPPER BOUND PROPERTY FOR SOLID MECHANICS OF THE LINEARLY CONFORMING RADIAL POINT INTERPOLATION METHOD (LC-RPIM), Elastic equilibrium of plane with circular inclusion containing radial cracks, GOVERNING EQUATIONS AND GENERAL SOLUTIONS OF PLANE ELASTICITY OF TWO-DIMENSIONAL DECAGONAL QUASICRYSTALS, Semi-Analytical Solution for Torsion of a Micropolar Beam of Elliptic Cross Section, ANALYTICAL SOLUTIONS FOR ROTATING EXPONENTIALLY-GRADED ANNULAR DISKS WITH VARIOUS BOUNDARY CONDITIONS, NONLINEAR ANALYSIS OF FRAMES INCLUDING SHEAR DEFORMATION, STABILITY ANALYSIS OF A CIRCULAR CYLINDRICAL SHELL BY THE EQUILIBRIUM METHOD, Efficient Approach to the Evaluation of Dynamic Stresses in Layered Circular Plates Based on the Prudnikov Formula for the Inverse Laplace Transformation, Analytical Solution for the Stress Field around a Hard Spherical Particle in a Metal Matrix Composite Incorporating Size and Finite Volume Effects, A generalized Fourier transform and its use in Flamant's problem of the classical theory of elasticity, On the Rotating Fiber-Reinforced Viscoelastic Composite Solid and Annular Disks of Variable Thickness, Интегро-дифференциальные уравнения второй краевой задачи линейной теории упругости. Сообщение 2. Неоднородное анизотропное тело, Comparison of Analytical and Experimental Results for Longitudinal Impacts on Elastic Rods, Eccentric Form of the Loss of Stability of a Rotating Elastoplastic Radially Inhomogeneous Stepped Circular Disk, Analysis of the Stress State of Hollow Cylinders with Concave Corrugated Cross Sections, A HYPERBOLIC SHEAR DEFORMATION THEORY FOR FLEXURE AND VIBRATION OF THICK ISOTROPIC BEAMS, ADDITIONAL PROPERTIES OF THE NODE-BASED SMOOTHED FINITE ELEMENT METHOD (NS-FEM) FOR SOLID MECHANICS PROBLEMS, A COMPLEX VARIABLE MESHLESS MANIFOLD METHOD FOR FRACTURE PROBLEMS, A CONFORMING POINT INTERPOLATION METHOD (CPIM) BY SHAPE FUNCTION RECONSTRUCTION FOR ELASTICITY PROBLEMS, Lekhnitskii’s Formalism for Stress Concentrations Around Irregularities in Anisotropic Plates: Solutions for Arbitrary Boundary Conditions, AN ERROR ESTIMATOR AND ADAPTIVITY BASED ON BASIS COEFFICIENT-VECTOR FIELD OF ELEMENT-FREE GALERKIN METHOD, A NONLOCAL CURVED BEAM MODEL BASED ON A MODIFIED COUPLE STRESS THEORY, A Refined Shear Deformation Plate Theory, Численное исследование влияния дефектов поверхности на устойчивость цилиндрической трубы с жидкостью, [https://portal.mardi4nfdi.de/wiki/Publication:3668024 Ein Beitrag zur Spannungsermittlung in Querpre�verb�nden], An optimal control approach to the design of stacked‐ply composite flywheels, Solution of contact problems for an inhomogeneous half-space when pressed by a circular-cylinder stamp
