The following pages link to John W. Hutchinson (Q194057):
Displaying 50 items.
- (Q162133) (redirect page) (← links)
- (Q215241) (redirect page) (← links)
- Generalizing \(J_2\) flow theory: fundamental issues in strain gradient plasticity (Q399549) (← links)
- Plastic flow localization due to non-uniform void distribution (Q594643) (← links)
- Approximate methods for analyzing the growth of large cracks in fatigue damaged aircraft sheet material and lap joints (Q671733) (← links)
- Fiber-matrix debonding effects on cracking in aligned fiber ceramic composites (Q675361) (← links)
- A fundamental model of cyclic instabilities in thermal barrier systems (Q700945) (← links)
- Bifurcation analysis of the onset of necking in an elastic/plastic cylinder under uniaxial tension (Q758879) (← links)
- Bucklewaves (Q817500) (← links)
- Neck development in metal/elastomer bilayers under dynamic stretchings (Q837364) (← links)
- Analyses of crack growth along interface of patterned wafer-level cu-cu bonds (Q837885) (← links)
- Metal sandwich plates subject to intense air shocks (Q869312) (← links)
- Metal sandwich plates optimized for pressure impulses (Q986187) (← links)
- Knockdown factors for buckling of cylindrical and spherical shells subject to reduced biaxial membrane stress (Q991719) (← links)
- Biographical sketch of Alan Needleman (2007) (Q1025266) (← links)
- Material aspects of dynamic neck retardation (Q1025273) (← links)
- Mode III effects on interface delamination (Q1025282) (← links)
- Concepts for structurally robust materials that combine low thermal expansion with high stiffness (Q1027073) (← links)
- Neck propagation (Q1056578) (← links)
- Continuum theory of dilatant transformation toughening in ceramics (Q1056600) (← links)
- Matrix fracture in fiber-reinforced ceramics (Q1064179) (← links)
- A class of phenomemological corner theories of plasticity (Q1135139) (← links)
- Surface instabilities on statically strained plastic solids (Q1137424) (← links)
- Shear band formation in plane strain (Q1155440) (← links)
- The relation between crack growth resistance and fracture process parameters in elastic-plastic solids (Q1202724) (← links)
- Fully plastic crack problems: the center-cracked strip under plane strain (Q1214816) (← links)
- Bifurcation phenomena in the plane tension test (Q1227487) (← links)
- Crack-tip fields in steady crack-growth with linear strain-hardening (Q1247236) (← links)
- The influence of plasticity on mixed mode interface toughness (Q1261876) (← links)
- Mode II fracture toughness of a brittle adhesive layer (Q1291269) (← links)
- Interaction between a major crack and small crack damage in aircraft sheet material (Q1291345) (← links)
- Crack deflection at an interface between dissimilar elastic materials: Role of residual stresses (Q1291428) (← links)
- Spherical impression of thin elastic films on elastic-plastic substrates (Q1302773) (← links)
- A phenomenological theory for strain gradient effects in plasticity (Q1319069) (← links)
- Effect of \(T\)-stress on mode I crack growth resistance in a ductile solid (Q1331877) (← links)
- A computational approach to ductile crack growth under large scale yielding conditions (Q1354926) (← links)
- Thermal conductivity and expansion of cross-ply composites with matrix cracks (Q1358849) (← links)
- Effect of strain-dependent cohesive zone model on predictions of crack growth resistance (Q1388573) (← links)
- On lower order strain gradient plasticity theories (Q1418751) (← links)
- Preliminary assessment of sandwich plates subject to blast loads. (Q1427023) (← links)
- Hardness trends in micron scale indentation (Q1434565) (← links)
- Kagomé plate structures for actuation (Q1434658) (← links)
- The influence of imperfections on the nucleation and propagation of buckling driven delaminations (Q1573090) (← links)
- Buckling of cylindrical sandwich shells with metal foam cores (Q1584968) (← links)
- Steady-state crack growth and work of fracture for solids characterized by strain gradient plasticity (Q1589271) (← links)
- On the determinacy of repetitive structures. (Q1811713) (← links)
- Particle impact on metal substrates with application to foreign object damage to aircraft engines (Q1811742) (← links)
- Two mechanisms of ductile fracture: Void by void growth versus multiple void interaction. (Q1863346) (← links)
- Influence of imperfections on the performance of metal foam core sandwich panels (Q1866269) (← links)
- The clamping stress in a cold-driven rivet (Q1960820) (← links)
