scientific article; zbMATH DE number 3943630
model reference adaptive controlmultivariable systemspole assignmentself-tuning and adaptive control
Conference proceedings and collections of articles (00Bxx) Proceedings, conferences, collections, etc. pertaining to systems and control theory (93-06) Synthesis problems (93B50) Pole and zero placement problems (93B55) Multivariable systems, multidimensional control systems (93C35) Adaptive control/observation systems (93C40)
[The articles of this volume were reviewed formerly as parts of the first edition (1981; Zbl 0497.00019)]. - Self-tuning and adaptive control have made an incredible mark on the development of control theory over the last twenty years and the indications are that this will continue motivated, in part, by the rapid advance of microprocessor technology. Chapter 1, by \textit{O. L. R. Jacobs} is a review of adaptive control from the point of view of stochastic control theory. The problems of suboptimal control and some relevant control-theoretic concepts (neutrality, separability, certainty-equivalence and caution and probing) are reviewed. Chapter 2, by \textit{D. W. Clarke}, is an introduction to self-tuning controllers leading directly to a series of practical applications which engender new theoretical developments. The models having predictive forms and the location of poles and zeros are specially studied. The prototype self-tuning regulator which minimizes the variance is derived. The recursive-least-squares parameter estimation algorithm, and its generalization to cover certain types of correlation noise are also presented. Recent issues as explicit LQ-based self-tuners and hybrid self-tuning are also considered at the end of the chapter. The chapter is mainly tutorial in nature. Chapter 3 is written by \textit{P. E. Wellstead} and \textit{O. L. Prager}. It discusses the off-line forms of the synthesis rules used in self-tuning and motivates their various forms. Their self-tuning versions are also discussed. The involved theory is supported by those of \textit{H. H. Rosenbrock} [State-space and multivariable theory (1970; Zbl 0246.93010)]. Chapter 4, by \textit{P. C. Parks}, deals with the stability and convergence of adaptive controllers for continuous systems. The hyperstability theory focused to the synthesis of adaptive controllers has been developed mainly by \textit{Y. D. Landau} [Adaptive control: the model reference approach (1979; Zbl 0475.93002)]. The importance of the positive-real transfer functions and the Popov integral inequality [see \textit{V. M. Popov}, Hyperstability of control systems (1973; Zbl 0276.93033)] towards the design of the adaptive loops through the implementation of non-linear adaptation error-dependent functions is studied. Narendra's error models in which the system and model can be identical for appropriate parameterizations are exposed. The hypothesis necessary for each of these schemes are also given [see \textit{K. S. Narendra} and \textit{B. B. Peterson}, Methods and applications in adaptive control, Proc. int. Symp., Bochum 1980, Lect. Notes Control Inf. Sci. 24, 84-101 (1980; Zbl 0456.93031)]. Chapter 5, by \textit{P. J. Gawthrop}, is devoted to the properties of adaptive controllers. A direct method for adaptive control is presented. A predictive model for the set-point is used and the control law is represented in particular implementable forms from general designs. The adaptive algorithms are discussed towards the prediction estimates, control law implementations and regression vector estimates. The stochastic and nonstochastic cases are considered. The analysis of stability through intermediate error feedback systems based upon the ideas of Landau, Narendra etc. and the passivity theorem [see \textit{C. A. Desoer} and \textit{M. Vidyasagar}, Feedback systems: Input-output properties (1975; Zbl 0327.93009)] are presented. The problems of stochastic convergence through the martingale convergence approaches are also remembered in the adaptive context. Chapter 6 is devoted to the implementation of self-tuning controllers by \textit{D. W. Clarke}. A general overview and details of a system based of an industry-standard microprocessor (the Intel 8080) are given. Fortran modules used to create simple minimum-variance self-tuning controllers (regulators) are presented. Topics about robust parameter estimation which can be used with the short word-length of microprocessors and solutions to the problems concerning with constant offsets and load disturbances are also discussed. An industrial self-tuning experiment on an industrial chemical batch reactor is described. Chapter 7, by \textit{H. Unbehauen}, outlines a systematic design procedure for discrete model reference adaptive control systems and investigates the solution of the above problems. The original work in this context is due to \textit{Chr. Schmid} [Ein Beitrag zur Realisierung adaptiver Regelungssysteme mit dem Prozeßrechner (Dissertation), Ruhr- Universität Bochum (1979)]. It can be applied to stable plants of arbitrarily high order and dead time for any reference model of the closed-loop system. An important aspect of the proposed design allow the characteristics dynamics of the error signal driving the adaptation of the controller parameters to be chosen arbitrarily fast to ensure that the adaptive control scheme permits a fast computation of the plant input. Chapter 8 deals with the design of set-point tracking and disturbance rejection controllers for unknown multivariable plants and it is written by \textit{B. Porter}. A (continuous) differential model with disturbances is dealth with. Stabilizability is assumed to be preserved under the introduction of an integral action. The analysis and implementation of digital controllers through the derivation of discrete state-space models from the above systems is discussed. Chapter 9, by \textit{A. S. I. Zinober}, is devoted to the controller design using the theory of variable structure systems which are characterized by the basic fact that the structure of the feedback control is altered as the state crosses discontinuity surfaces in the state space with the result that some desirable control properties are achieved. The application of variable structure systems design theory to model following control systems and adaptive near-time-optimal control with time-varying hyperplanes are considered. The basic related theory has been basically developed by some Soviet authors [see \textit{S. V. Emel'yanov}, Automatic control systems of variable structure (Russian) (1967; Zbl 0178.099); \textit{V. I. Utkin}, Sliding modes and their application in variable structure systems (1978; Zbl 0398.93003)]. Chapter 10, by \textit{D. H. Owens} and \textit{A. Chotai}, presents simple models for robust control of unknown of badly defined multivariable systems. The conceptual basis of the ideas is illustrated by the technique of approximating plant dynamics by a first-order lag. These ideas are extended to the multivariable case with emphasis on prediction of stability and transient performance and on evaluation of its sensitivity/robustness to data errors [see \textit{D. H. Owens} and \textit{C. Chotai}, Robust control of unknown large-scale systems using transient data only, Research Report No.134, Dept. Control Eng., Univ. Sheffield]. Final extensions to the case of presence of measurement nonlinearities are also given. Chapter 11, by \textit{A. S. Morris}, \textit{L. Nazer} and \textit{R. K. Wood}, outlines the development of both single and multivariable self-tuning controllers based on the single variable controller of Clarke and Gawthrop (see chapter 2). The controller can deal with non-minimum phase systems, does not have the limitation that all loop time delays must be equal and is amenable to pole location specification for pre-design, or even on-line design, of the desired system transient behaviour. The self- tuning controller uses a recursive factorization parameter estimator based on the method of least squares. The scheme's closed-loop properties are discussed. The distillation column pilot plant control is considered [see \textit{V. A. Sastry}, \textit{D. E. Seborg} and \textit{R. K. Wood}, Automatica 13, 417-424 (1977) and \textit{Meyer} et al., Experimental evaluation of analytical and Smith predictors for distillation column control, Am. Inst. Chem. Eng. J. 25, 24-32 (1979)]. Chapter 12, by \textit{P. E. Wellstead} and \textit{P. M. Zanker}, Application of self-tuning to engine control, is an experimental work on self-tuning control for first-order models which is proved, by experimentation, to perform well. Chapter 13, by \textit{N. Mort} and \textit{D. A. Cinkens}, develops self- tuning control applications for control of motion of ships. Linear and nonlinear models are considered. It is concluded that the algorithms are suitable and perform favourably compared with an optimal state-feedback controller being designed by assuming complete knowledge of the linear second order transfer function parameters. Chapter 14, by \textit{P. T. K. Fung} and \textit{M. J. Grimble}, deals with self-tuning filtering with quadratic optimal control for ship positioning. It is verfied that the high frequency components of ship motion are estimated successfully. Some argued advantages over the usual extended Kalman filtering schemes are as follows: there is no need to specify the process noise and the measurement noise covariances (high frequency). It requires slow computing time since the high frequency states are not estimated. Chapter 15, by \textit{K. Warwick}, presents extension of classical self- tuning control. First a state-space formulation with minimum mean square linear estimator (Kalman-Bucy mode) for control is given. It is not more complicated than standard control based upon polynomial representations. A self-tuning algorithm is used for estimation. Low order forms and general structures for PID self-tuning are presented. Extensions to dead- beat controllers for deterministic and stochastic systems, the k- incremental self-tuning controller, etc. are also presented. Different (implicit and explicit) pole assignment controllers which, because of their structure, are applicable to nonminimum phase systems and, with simple extensions of the model numerators, to systems having a variable time delay are considered. It is my opinion that this volume gives an extensive overview to modern methods of adaptive control and self-tuning control design with close comparisons between design methodologies and different implementable schemes. A modern bibliography on these subjects is included. Several engineering applications are discussed and related experimental/simulation results presented so that the book is useful for both theorists and practitioners.
- Stochastic optimal control theory with application in self-tuning control
- Simplified parameter adaptive control
- Stability, convergence, and robustness of deterministic multivariable self-tuning control
- Self-tuning control of non-linear ARMAX models
- Self-tuning control application to a nuclear power plant
- A prediction-error and stepwise-regression estimation algorithm for non-linear systems
- scientific article; zbMATH DE number 4072818 (Why is no real title available?)
- scientific article; zbMATH DE number 4091309 (Why is no real title available?)
- scientific article; zbMATH DE number 4093244 (Why is no real title available?)
- Fast parallel self-tuning controllers
- scientific article; zbMATH DE number 194878 (Why is no real title available?)
- Editorial
- scientific article; zbMATH DE number 3266549 (Why is no real title available?)
- Theory and applications of adaptive control - a survey
This page was built for publication:
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q3714957)