Variational multiscale method stabilization parameter calculated from the strain-rate tensor
From MaRDI portal
Publication:6166565
DOI10.1142/S0218202523500380zbMATH Open1529.76057MaRDI QIDQ6166565FDOQ6166565
Authors: Kenji Takizawa, Yuto Otoguro, Tayfun E. Tezduyar 
Publication date: 3 August 2023
Published in: M\(^3\)AS. Mathematical Models \& Methods in Applied Sciences (Search for Journal in Brave)
streamline-upwind/Petrov-Galerkin methoddiffusion length scaledirection-dependent length scalelocal length scalepressure-stabilizing/Petrov-Galerkin methodsolution-gradient direction
Fluid-solid interactions (including aero- and hydro-elasticity, porosity, etc.) (74F10) Finite element methods applied to problems in fluid mechanics (76M10) Variational methods applied to problems in fluid mechanics (76M30) Diffusion and convection (76R99)
Cites Work
- Projection-based stabilization of interface Lagrange multipliers in immersogeometric fluid-thin structure interaction analysis, with application to heart valve modeling
- Computational and experimental investigation of free vibration and flutter of bridge decks
- Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization
- Medical-image-based aorta modeling with zero-stress-state estimation
- Residual-based variational multi-scale modeling for particle-laden gravity currents over flat and triangular wavy terrains
- Immersogeometric analysis of moving objects in incompressible flows
- Ventricle-valve-aorta flow analysis with the space-time isogeometric discretization and topology change
- Performance analysis of two vertical-axis hydrokinetic turbines using variational multiscale method
- The actuator line method for wind turbine modelling applied in a variational multiscale framework
- Immersogeometric fluid-structure interaction modeling and simulation of transcatheter aortic valve replacement
- Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle
- Element length calculation in B-spline meshes for complex geometries
- Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method
- A contact formulation based on a volumetric potential: application to isogeometric simulations of atrioventricular valves
- Isogeometric hyperelastic shell analysis with out-of-plane deformation mapping
- Space-time computations in practical engineering applications: a summary of the 25-year history
- Tire aerodynamics with actual tire geometry, road contact and tire deformation
- New directions in space-time computational methods
- Error estimates for projection-based dynamic augmented Lagrangian boundary condition enforcement, with application to fluid-structure interaction
- Methods for computation of flow-driven string dynamics in a pump and residence time
- Space-time isogeometric flow analysis with built-in Reynolds-equation limit
- A stabilized ALE method for computational fluid-structure interaction analysis of passive morphing in turbomachinery
- Variational multiscale framework for cavitating flows
- Computational cardiovascular analysis with the variational multiscale methods and isogeometric discretization
- Direct immersogeometric fluid flow analysis using B-rep CAD models
- An interactive geometry modeling and parametric design platform for isogeometric analysis
- An immersogeometric formulation for free-surface flows with application to marine engineering problems
- Immersogeometric cardiovascular fluid-structure interaction analysis with divergence-conforming B-splines
- Rapid B-rep model preprocessing for immersogeometric analysis using analytic surfaces
- A framework for parametric design optimization using isogeometric analysis
- A variational multiscale framework for atmospheric turbulent flows over complex environmental terrains
- Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method
- Isogeometric analysis of multi-phase flows with surface tension and with application to dynamics of rising bubbles
- A fully coupled finite element formulation for liquid-solid-gas thermo-fluid flow with melting and solidification
- Penalty coupling of non-matching isogeometric Kirchhoff-Love shell patches with application to composite wind turbine blades
- Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine
- Isogeometric analysis of ice accretion on wind turbine blades
- Variational multiscale flow analysis in aerospace, energy and transportation technologies
- Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries
- A thermal multi-phase flow model for directed energy deposition processes via a moving signed distance function
- Modeling and simulation of bridge-section buffeting response in turbulent flow
- An octree-based immersogeometric approach for modeling inertial migration of particles in channels
- Simulation of stably stratified turbulent channel flow using residual-based variational multiscale method and isogeometric analysis
- Space-time VMS isogeometric analysis of the Taylor-Couette flow
- A moving-domain CFD solver in FEniCS with applications to tidal turbine simulations in turbulent flows
- Stabilized methods for high-speed compressible flows: toward hypersonic simulations
- A hyperelastic extended Kirchhoff-Love shell model with out-of-plane normal stress. I: Out-of-plane deformation
- Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
- U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization
- High-resolution multi-domain space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
- Space–Time Flow Computation with Contact Between the Moving Solid Surfaces
- Space-time computational FSI and flow analysis: 2004 and beyond
- T-splines computational membrane-cable structural mechanics with continuity and smoothness. I: Method and implementation
- T-splines computational membrane-cable structural mechanics with continuity and smoothness. II: Spacecraft parachutes
- Carrier-domain method for high-resolution computation of time-periodic long-wake flows
- Flow computation with the Space–Time Isogeometric Analysis and higher-order basis functions in time
- Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks
- Lagrangian-Eulerian finite element formulation for incompressible viscous flows
- Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
- Title not available (Why is that?)
- Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
- FSI modeling of a propulsion system based on compliant hydrofoils in a tandem configuration
- Dynamic and fluid-structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models
- Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods
- Aerodynamic and FSI analysis of wind turbines with the ALE-VMS and ST-VMS methods
- Isogeometric fluid structure interaction analysis with emphasis on non-matching discretizations, and with application to wind turbines
- Large eddy simulation of turbulent channel flows by the variational multiscale method
- Computation of moving boundaries and interfaces and stabilization parameters
- Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
- Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device
- A new finite element formulation for computational fluid dynamics. II. Beyond SUPG
- Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
- Computational fluid-structure interaction: methods and application to a total cavopulmonary connection
- A new strategy for finite element computations involving moving boundaries and interfaces --- The deforming-spatial-domain/space-time procedure. I: The concept and the preliminary numerical tests
- A new strategy for finite element computations involving moving boundaries and interfaces --- The deforming-spatial-domain/space-time procedure. II: Computation of free-surface flows, two-liquid flows, and flows with drifting cylinders
- Finite element stabilization parameters computed from element matrices and vectors
- Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA)
- An immersogeometric variational framework for fluid-structure interaction: application to bioprosthetic heart valves
- Patient-specific computer modeling of blood flow in cerebral arteries with aneurysm and stent
- Space-time computational analysis of bio-inspired flapping-wing aerodynamics of a micro aerial vehicle
- Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
- Stabilization and shock-capturing parameters in SUPG formulation of compressible flows
- Space-time VMS computation of wind-turbine rotor and tower aerodynamics
- Computational thermo-fluid analysis of a disk brake
- Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
- 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
- 3D simulation of wind turbine rotors at full scale. II: Fluid--structure interaction modeling with composite blades
- Space-time fluid-structure interaction methods
- ALE-VMS and ST-VMS methods for computer modeling of wind-turbine rotor aerodynamics and fluid--structure interaction
- ST and ALE-VMS methods for patient-specific cardiovascular fluid mechanics modeling
- Engineering analysis and design with ALE-VMS and space-time methods
- New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods
- Multiscale space-time methods for thermo-fluid analysis of a ground vehicle and its tires
- ALE-VMS formulation for stratified turbulent incompressible flows with applications
- Space-time VMS method for flow computations with slip interfaces (ST-SI)
- Patient-specific computational analysis of the influence of a stent on the unsteady flow in cerebral aneurysms
- Stabilized Finite Element Formulations for Incompressible Flow Computations
- Numerical-performance studies for the stabilized space-time computation of wind-turbine rotor aerodynamics
- Computation of residence time in the simulation of pulsatile ventricular assist devices
- Shape optimization of pulsatile ventricular assist devices using FSI to minimize thrombotic risk
- Space-time interface-tracking with topology change (ST-TC)
- Space-time fluid mechanics computation of heart valve models
- Fluid-structure interaction analysis of bioprosthetic heart valves: significance of arterial wall deformation
- Computational fluid-structure interaction. Methods and applications
- CHALLENGES AND DIRECTIONS IN COMPUTATIONAL FLUID–STRUCTURE INTERACTION
- Space-time VMS methods for modeling of incompressible flows at high Reynolds numbers
- STRUCTURAL MECHANICS MODELING AND FSI SIMULATION OF WIND TURBINES
- Methods for FSI modeling of spacecraft parachute dynamics and cover separation
- Space-time and ALE-VMS techniques for patient-specific cardiovascular fluid-structure interaction modeling
- Modelling of fluid–structure interactions with the space–time finite elements: Solution techniques
- Multiscale space-time fluid-structure interaction techniques
- Enhanced-discretization space-time technique (EDSTT)
- NURBS-based isogeometric analysis for the computation of flows about rotating components
- Isogeometric fluid-structure interaction: Theory, algorithms, and computations
- Large eddy simulation of turbulent Taylor-Couette flow using isogeometric analysis and the residual-based variational multiscale method
- Incompressible flow computations with stabilized bilinear and linear equal-order-interpolation velocity-pressure elements
- Finite element methods for first-order hyperbolic systems with particular emphasis on the compressible Euler equations
- A new finite element formulation for computational fluid dynamics. V: Circumventing the Babuška-Brezzi condition: A stable Petrov-Galerkin formulation of the Stokes problem accommodating equal-order interpolations
- Discontinuity-capturing finite element formulations for nonlinear convection-diffusion-reaction equations
- A parallel 3D computational method for fluid-structure interactions in parachute systems
- Fluid-structure interaction modeling of clusters of spacecraft parachutes with modified geometric porosity
- Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. I: Computational framework
- Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. II: Spatial and temporal resolution
- A computational procedure for prebending of wind turbine blades
- Space--time finite element computation of complex fluid--structure interactions
- ALE and space-time variational multiscale isogeometric analysis of wind turbines and turbomachinery
- High-performance computing of wind turbine aerodynamics using isogeometric analysis
- Title not available (Why is that?)
- A fully-coupled fluid-structure interaction simulation of cerebral aneurysms
- The tetrahedral finite cell method for fluids: immersogeometric analysis of turbulent flow around complex geometries
- Isogeometric Kirchhoff-Love shell formulations for general hyperelastic materials
- Isogeometric discretization methods in computational fluid mechanics
- Wind turbine wake computation with the ST-VMS method and isogeometric discretization: directional preference in spatial refinement
- Using ALE-VMS to compute aerodynamic derivatives of bridge sections
- Aorta zero-stress state modeling with T-spline discretization
- Fluid-structure interaction simulation of pulsatile ventricular assist devices
- FSI modeling of the Orion spacecraft drogue parachutes
- A Geometrical-Characteristics Study in Patient-Specific FSI Analysis of Blood Flow in the Thoracic Aorta
- Stability and conservation properties of collocated constraints in immersogeometric fluid-thin structure interaction analysis
- A rapid and efficient isogeometric design space exploration framework with application to structural mechanics
- Boundary layer mesh resolution in flow computation with the Space–Time Variational Multiscale method and isogeometric discretization
- Stabilization and discontinuity-capturing parameters for space-time flow computations with finite element and isogeometric discretizations
- Computational free-surface fluid-structure interaction with application to floating offshore wind turbines
- Ram-air parachute structural and fluid mechanics computations with the space-time isogeometric analysis (ST-IGA)
- Modeling of a hydraulic arresting gear using fluid-structure interaction and isogeometric analysis
- Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines
- Heart valve flow computation with the integrated space-time VMS, slip interface, topology change and isogeometric discretization methods
- Space-time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film
- Optimizing fluid-structure interaction systems with immersogeometric analysis and surrogate modeling: application to a hydraulic arresting gear
- Title not available (Why is that?)
- Porosity models and computational methods for compressible-flow aerodynamics of parachutes with geometric porosity
- Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization
- Computational analysis methods for complex unsteady flow problems
- A new variational multiscale formulation for stratified incompressible turbulent flows
- FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow
- Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling
Cited In (8)
- High-resolution 3D computation of time-periodic long-wake flows with the carrier-domain method and space-time variational multiscale method with isogeometric discretization
- Fluid-structure interaction modeling with nonmatching interface discretizations for compressible flow problems: simulating aircraft tail buffeting
- Space-time computational flow analysis: unconventional methods and first-ever solutions
- An alternative scheme to calculate the strain rate tensor for the LES applications in the LBM
- Local-length-scale calculation in T-splines meshes for complex geometries
- Mesh-driven resampling and regularization for robust point cloud-based flow analysis directly on scanned objects
- Space-time flow computation with boundary layer and contact representation: a 10-year history
- Isogeometric analysis in computation of complex-geometry flow problems with moving boundaries and interfaces
This page was built for publication: Variational multiscale method stabilization parameter calculated from the strain-rate tensor
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q6166565)
