Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine
From MaRDI portal
Publication:1995005
DOI10.1007/s00466-020-01910-5zbMath1468.74079OpenAlexW3082829332WikidataQ113326846 ScholiaQ113326846MaRDI QIDQ1995005
Kenji Takizawa, Hiroki Mochizuki, Yuto Otoguro, Tayfun E. Tezduyar
Publication date: 18 February 2021
Published in: Computational Mechanics (Search for Journal in Brave)
Full work available at URL: https://doi.org/10.1007/s00466-020-01910-5
space-time variational multiscale methodmesh relaxationisogeometric NURBS mesh generationslip interface method
Fluid-solid interactions (including aero- and hydro-elasticity, porosity, etc.) (74F10) Computer-aided design (modeling of curves and surfaces) (65D17) Basic methods in fluid mechanics (76M99) Isogeometric methods applied to problems in solid mechanics (74S22)
Related Items (26)
Space–Time Computational FSI and Flow Analysis: 2004 and Beyond ⋮ Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation ⋮ Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. I: Computational framework ⋮ A numerical formulation for cavitating flows around marine propellers based on variational multiscale method ⋮ Wall-function-based weak imposition of Dirichlet boundary condition for stratified turbulent flows ⋮ Computational multi-phase convective conjugate heat transfer on overlapping meshes: a quasi-direct coupling approach via Schwarz alternating method ⋮ Carrier-domain method for high-resolution computation of time-periodic long-wake flows ⋮ Physics-informed machine learning for surrogate modeling of wind pressure and optimization of pressure sensor placement ⋮ Isogeometric discretization methods in computational fluid mechanics ⋮ Isogeometric variational multiscale modeling of stably stratified flow over complex terrains ⋮ Boundary layer mesh resolution in flow computation with the Space–Time Variational Multiscale method and isogeometric discretization ⋮ Flow computation with the Space–Time Isogeometric Analysis and higher-order basis functions in time ⋮ Isogeometric large-eddy simulations of turbulent particle-laden flows ⋮ High-resolution multi-domain space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation ⋮ Isogeometric analysis in computation of complex-geometry flow problems with moving boundaries and interfaces ⋮ Revealing aeroelastic effects on low-rise roof structures in turbulent winds via isogeometric fluid-structure interaction ⋮ Variational multiscale method stabilization parameter calculated from the strain-rate tensor ⋮ Space-time computational flow analysis: unconventional methods and first-ever solutions ⋮ T-splines computational membrane-cable structural mechanics with continuity and smoothness. I: Method and implementation ⋮ U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization ⋮ Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method ⋮ A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion ⋮ Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks ⋮ Space-time VMS isogeometric analysis of the Taylor-Couette flow ⋮ A variational multiscale immersed meshfree method for fluid structure interactive systems involving shock waves ⋮ A large deformation isogeometric continuum shell formulation incorporating finite strain elastoplasticity
Uses Software
Cites Work
- Computational thermo-fluid analysis of a disk brake
- Engineering analysis and design with ALE-VMS and space-time methods
- Aerodynamic and FSI analysis of wind turbines with the ALE-VMS and ST-VMS methods
- Isogeometric fluid structure interaction analysis with emphasis on non-matching discretizations, and with application to wind turbines
- Patient-specific computational analysis of the influence of a stent on the unsteady flow in cerebral aneurysms
- High-performance computing of wind turbine aerodynamics using isogeometric analysis
- Numerical-performance studies for the stabilized space-time computation of wind-turbine rotor aerodynamics
- Estimation of element-based zero-stress state for arterial FSI computations
- Computation of residence time in the simulation of pulsatile ventricular assist devices
- Shape optimization of pulsatile ventricular assist devices using FSI to minimize thrombotic risk
- Space-time interface-tracking with topology change (ST-TC)
- Space-time fluid mechanics computation of heart valve models
- FSI analysis of the blood flow and geometrical characteristics in the thoracic aorta
- Coronary arterial dynamics computation with medical-image-based time-dependent anatomical models and element-based zero-stress state estimates
- Fluid-structure interaction analysis of bioprosthetic heart valves: significance of arterial wall deformation
- A variational multiscale method for particle-cloud tracking in turbomachinery flows
- Multiscale methods for gore curvature calculations from FSI modeling of spacecraft parachutes
- Computational methods for parachute fluid-structure interactions
- Space-time and ALE-VMS techniques for patient-specific cardiovascular fluid-structure interaction modeling
- Stabilized space-time computation of wind-turbine rotor aerodynamics
- A comparison of outlet boundary treatments for prevention of backflow divergence with relevance to blood flow simulations
- Multiscale space-time fluid-structure interaction techniques
- Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization
- Computational analysis of particle-laden-airflow erosion and experimental verification
- A low-distortion mesh moving method based on fiber-reinforced hyperelasticity and optimized zero-stress state
- NURBS-based isogeometric analysis for the computation of flows about rotating components
- Isogeometric fluid-structure interaction: Theory, algorithms, and computations
- Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
- Weak imposition of Dirichlet boundary conditions in fluid mechanics
- Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
- Large eddy simulation of turbulent Taylor-Couette flow using isogeometric analysis and the residual-based variational multiscale method
- A fully-coupled fluid-structure interaction simulation of cerebral aneurysms
- A DRD finite element formulation for computing turbulent reacting flows in gas turbine combustors
- Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
- Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device
- Computational fluid-structure interaction: methods and application to a total cavopulmonary connection
- Lagrangian-Eulerian finite element formulation for incompressible viscous flows
- Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
- A parallel 3D computational method for fluid-structure interactions in parachute systems
- Stabilization and discontinuity-capturing parameters for space-time flow computations with finite element and isogeometric discretizations
- Space-time method for flow computations with slip interfaces and topology changes (ST-SI-TC)
- Computational free-surface fluid-structure interaction with application to floating offshore wind turbines
- Computational analysis of wind-turbine blade rain erosion
- Flow analysis of a wave-energy air turbine with the SUPG/PSPG stabilization and discontinuity-capturing directional dissipation
- Ram-air parachute structural and fluid mechanics computations with the space-time isogeometric analysis (ST-IGA)
- FSI modeling of a propulsion system based on compliant hydrofoils in a tandem configuration
- Modeling of a hydraulic arresting gear using fluid-structure interaction and isogeometric analysis
- Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA)
- Computational analysis of flow-driven string dynamics in turbomachinery
- A new variational multiscale formulation for stratified incompressible turbulent flows
- Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines
- FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow
- Heart valve flow computation with the integrated space-time VMS, slip interface, topology change and isogeometric discretization methods
- Space-time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method
- Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling
- Projection-based stabilization of interface Lagrange multipliers in immersogeometric fluid-thin structure interaction analysis, with application to heart valve modeling
- Computational and experimental investigation of free vibration and flutter of bridge decks
- Turbocharger turbine and exhaust manifold flow computation with the space-time variational multiscale method and isogeometric analysis
- Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization
- Using ALE-VMS to compute aerodynamic derivatives of bridge sections
- An immersogeometric variational framework for fluid-structure interaction: application to bioprosthetic heart valves
- Massively parallel finite element simulation of compressible and incompressible flows
- Computational analysis of noise reduction devices in axial fans with stabilized finite element formulations
- Patient-specific computer modeling of blood flow in cerebral arteries with aneurysm and stent
- Fluid-structure interaction modeling of wind turbines: simulating the full machine
- Space-time computational analysis of bio-inspired flapping-wing aerodynamics of a micro aerial vehicle
- Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
- SUPG and discontinuity-capturing methods for coupled fluid mechanics and electrochemical transport problems
- Penalty coupling of non-matching isogeometric Kirchhoff-Love shell patches with application to composite wind turbine blades
- Medical-image-based aorta modeling with zero-stress-state estimation
- Computer modeling techniques for flapping-wing aerodynamics of a locust
- Ventricle-valve-aorta flow analysis with the space-time isogeometric discretization and topology change
- Isogeometric analysis of ice accretion on wind turbine blades
- Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle
- Space-time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film
- Element length calculation in B-spline meshes for complex geometries
- Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method
- Optimizing fluid-structure interaction systems with immersogeometric analysis and surrogate modeling: application to a hydraulic arresting gear
- Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows
- Computational analysis of performance deterioration of a wind turbine blade strip subjected to environmental erosion
- Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly enforced boundary conditions on unstretched meshes
- Improving stability of stabilized and multiscale formulations in flow simulations at small time steps
- Isogeometric hyperelastic shell analysis with out-of-plane deformation mapping
- Space-time computations in practical engineering applications: a summary of the 25-year history
- Tire aerodynamics with actual tire geometry, road contact and tire deformation
- Aorta zero-stress state modeling with T-spline discretization
- Fluid-structure interaction simulation of pulsatile ventricular assist devices
- Fluid-structure interaction modeling of clusters of spacecraft parachutes with modified geometric porosity
- Space-time VMS computation of wind-turbine rotor and tower aerodynamics
- FSI modeling of the Orion spacecraft drogue parachutes
- Particle tracking and particle-shock interaction in compressible-flow computations with the V-SGS stabilization and \(YZ\beta\) shock-capturing
- Dynamic and fluid-structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models
- Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods
- Anatomically realistic lumen motion representation in patient-specific space-time isogeometric flow analysis of coronary arteries with time-dependent medical-image data
- Space-time fluid-structure interaction modeling of patient-specific cerebral aneurysms
- A computational procedure for prebending of wind turbine blades
- Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
- Flow Analysis of a Wave-Energy Air Turbine with the SUPG/PSPG Method and DCDD
- SUPG/PSPG Computational Analysis of Rain Erosion in Wind-Turbine Blades
- New Directions in Space–Time Computational Methods
- A Geometrical-Characteristics Study in Patient-Specific FSI Analysis of Blood Flow in the Thoracic Aorta
- Space-time finite element computation of complex fluid-structure interactions
- 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
- 3D simulation of wind turbine rotors at full scale. Part II: Fluid-structure interaction modeling with composite blades
- Stabilized finite element computation of NOx emission in aero-engine combustors
- Patient-specific arterial fluid-structure interaction modeling of cerebral aneurysms
- SPACE–TIME FLUID–STRUCTURE INTERACTION METHODS
- ALE-VMS AND ST-VMS METHODS FOR COMPUTER MODELING OF WIND-TURBINE ROTOR AERODYNAMICS AND FLUID–STRUCTURE INTERACTION
- ST and ALE-VMS methods for patient-specific cardiovascular fluid mechanics modeling
- Computational Cardiovascular Analysis with the Variational Multiscale Methods and Isogeometric Discretization
- ALE and Space–Time Variational Multiscale Isogeometric Analysis of Wind Turbines and Turbomachinery
- Variational Multiscale Flow Analysis in Aerospace, Energy and Transportation Technologies
- Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries
- Space-time finite element computation of arterial fluid-structure interactions with patient-specific data
- New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods
- Multiscale space–time methods for thermo-fluid analysis of a ground vehicle and its tires
- ALE–VMS formulation for stratified turbulent incompressible flows with applications
- Space–time VMS method for flow computations with slip interfaces (ST-SI)
- Arterial fluid mechanics modeling with the stabilized space–time fluid–structure interaction technique
- Large eddy simulation of turbulent channel flows by the variational multiscale method
- Stabilized Finite Element Formulations for Incompressible Flow Computations
- Computation of moving boundaries and interfaces and stabilization parameters
- Error estimates for projection-based dynamic augmented Lagrangian boundary condition enforcement, with application to fluid–structure interaction
- Computational Fluid–Structure Interaction
- CHALLENGES AND DIRECTIONS IN COMPUTATIONAL FLUID–STRUCTURE INTERACTION
- SPACE–TIME VMS METHODS FOR MODELING OF INCOMPRESSIBLE FLOWS AT HIGH REYNOLDS NUMBERS
- STRUCTURAL MECHANICS MODELING AND FSI SIMULATION OF WIND TURBINES
- METHODS FOR FSI MODELING OF SPACECRAFT PARACHUTE DYNAMICS AND COVER SEPARATION
- Computational analysis methods for complex unsteady flow problems
- Methods for computation of flow-driven string dynamics in a pump and residence time
- Space–time Isogeometric flow analysis with built-in Reynolds-equation limit
- A stabilized ALE method for computational fluid–structure interaction analysis of passive morphing in turbomachinery
- Modelling of fluid–structure interactions with the space–time finite elements: Solution techniques
- Porosity models and computational methods for compressible-flow aerodynamics of parachutes with geometric porosity
This page was built for publication: Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine
