A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion

back-cycle-based mesh moving cycle-to-cycle accumulated distortion half-cycle-based mesh moving linear-elasticity equations mesh moving method mesh-Jacobian-based stiffening

Mathematics Subject Classification ID

Mechanics of deformable solids (74-XX)

Cites Work

Heart valve flow computation with the integrated space-time VMS, slip interface, topology change and isogeometric discretization methods
Space-time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method
Turbocharger turbine and exhaust manifold flow computation with the space-time variational multiscale method and isogeometric analysis
Space-time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film
Optimizing fluid-structure interaction systems with immersogeometric analysis and surrogate modeling: application to a hydraulic arresting gear
Porosity models and computational methods for compressible-flow aerodynamics of parachutes with geometric porosity
Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization
Computational analysis methods for complex unsteady flow problems
Computational analysis of wind-turbine blade rain erosion
Flow analysis of a wave-energy air turbine with the SUPG/PSPG stabilization and discontinuity-capturing directional dissipation
A new variational multiscale formulation for stratified incompressible turbulent flows
FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow
Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling
Projection-based stabilization of interface Lagrange multipliers in immersogeometric fluid-thin structure interaction analysis, with application to heart valve modeling
Computational and experimental investigation of free vibration and flutter of bridge decks
Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization
Frontiers in computational fluid-structure interaction and flow simulation. Research from lead investigators under forty -- 2018
Medical-image-based aorta modeling with zero-stress-state estimation
Ventricle-valve-aorta flow analysis with the space-time isogeometric discretization and topology change
Immersogeometric fluid-structure interaction modeling and simulation of transcatheter aortic valve replacement
Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle
Element length calculation in B-spline meshes for complex geometries
Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method
Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows
Computational analysis of performance deterioration of a wind turbine blade strip subjected to environmental erosion
Isogeometric hyperelastic shell analysis with out-of-plane deformation mapping
Space-time computations in practical engineering applications: a summary of the 25-year history
Tire aerodynamics with actual tire geometry, road contact and tire deformation
Anatomically realistic lumen motion representation in patient-specific space-time isogeometric flow analysis of coronary arteries with time-dependent medical-image data
New directions in space-time computational methods
Error estimates for projection-based dynamic augmented Lagrangian boundary condition enforcement, with application to fluid-structure interaction
Methods for computation of flow-driven string dynamics in a pump and residence time
Space-time isogeometric flow analysis with built-in Reynolds-equation limit
A stabilized ALE method for computational fluid-structure interaction analysis of passive morphing in turbomachinery
Computational analysis of particle-laden-airflow erosion and experimental verification
A low-distortion mesh moving method based on fiber-reinforced hyperelasticity and optimized zero-stress state
Computational cardiovascular analysis with the variational multiscale methods and isogeometric discretization
Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method
Penalty coupling of non-matching isogeometric Kirchhoff-Love shell patches with application to composite wind turbine blades
Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine
Isogeometric analysis of ice accretion on wind turbine blades
Variational multiscale flow analysis in aerospace, energy and transportation technologies
Lagrangian-Eulerian finite element formulation for incompressible viscous flows
Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
Mesh Moving Techniques for Fluid-Structure Interactions With Large Displacements
Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
FSI modeling of a propulsion system based on compliant hydrofoils in a tandem configuration
Fluid-structure interaction modeling of wind turbines: simulating the full machine
Dynamic and fluid-structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models
Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods
Aerodynamic and FSI analysis of wind turbines with the ALE-VMS and ST-VMS methods
Isogeometric fluid structure interaction analysis with emphasis on non-matching discretizations, and with application to wind turbines
Large eddy simulation of turbulent channel flows by the variational multiscale method
Computation of moving boundaries and interfaces and stabilization parameters
Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device
Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
Computational fluid-structure interaction: methods and application to a total cavopulmonary connection
Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA)
An immersogeometric variational framework for fluid-structure interaction: application to bioprosthetic heart valves
Computational analysis of noise reduction devices in axial fans with stabilized finite element formulations
Patient-specific computer modeling of blood flow in cerebral arteries with aneurysm and stent
Space-time computational analysis of bio-inspired flapping-wing aerodynamics of a micro aerial vehicle
Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
SUPG and discontinuity-capturing methods for coupled fluid mechanics and electrochemical transport problems
Computer modeling techniques for flapping-wing aerodynamics of a locust
Improving stability of stabilized and multiscale formulations in flow simulations at small time steps
Space-time finite element techniques for computation of fluid-structure interactions
Space-time VMS computation of wind-turbine rotor and tower aerodynamics
Particle tracking and particle-shock interaction in compressible-flow computations with the V-SGS stabilization and \(YZ\beta\) shock-capturing
Computational thermo-fluid analysis of a disk brake
Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
3D simulation of wind turbine rotors at full scale. II: Fluid--structure interaction modeling with composite blades
Stabilized finite element computation of NOx emission in aero-engine combustors
Space-time fluid-structure interaction methods
ALE-VMS and ST-VMS methods for computer modeling of wind-turbine rotor aerodynamics and fluid--structure interaction
ST and ALE-VMS methods for patient-specific cardiovascular fluid mechanics modeling
Engineering analysis and design with ALE-VMS and space-time methods
Space-time finite element computation of arterial fluid-structure interactions with patient-specific data
New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods
Multiscale space-time methods for thermo-fluid analysis of a ground vehicle and its tires
ALE-VMS formulation for stratified turbulent incompressible flows with applications
Space-time VMS method for flow computations with slip interfaces (ST-SI)
Arterial fluid mechanics modeling with the stabilized space–time fluid–structure interaction technique
Patient-specific computational analysis of the influence of a stent on the unsteady flow in cerebral aneurysms
Stabilized Finite Element Formulations for Incompressible Flow Computations
Numerical-performance studies for the stabilized space-time computation of wind-turbine rotor aerodynamics
Estimation of element-based zero-stress state for arterial FSI computations
Computation of residence time in the simulation of pulsatile ventricular assist devices
Shape optimization of pulsatile ventricular assist devices using FSI to minimize thrombotic risk
Space-time interface-tracking with topology change (ST-TC)
Space-time fluid mechanics computation of heart valve models
FSI analysis of the blood flow and geometrical characteristics in the thoracic aorta
Coronary arterial dynamics computation with medical-image-based time-dependent anatomical models and element-based zero-stress state estimates
Fluid-structure interaction analysis of bioprosthetic heart valves: significance of arterial wall deformation
A variational multiscale method for particle-cloud tracking in turbomachinery flows
Computational fluid-structure interaction. Methods and applications
CHALLENGES AND DIRECTIONS IN COMPUTATIONAL FLUID–STRUCTURE INTERACTION
Space-time VMS methods for modeling of incompressible flows at high Reynolds numbers
STRUCTURAL MECHANICS MODELING AND FSI SIMULATION OF WIND TURBINES
Methods for FSI modeling of spacecraft parachute dynamics and cover separation
Computational methods for parachute fluid-structure interactions
Space-time and ALE-VMS techniques for patient-specific cardiovascular fluid-structure interaction modeling
Modelling of fluid–structure interactions with the space–time finite elements: Solution techniques
Modelling of fluid–structure interactions with the space–time finite elements: Arterial fluid mechanics
Stabilized space-time computation of wind-turbine rotor aerodynamics
Multiscale space-time fluid-structure interaction techniques
NURBS-based isogeometric analysis for the computation of flows about rotating components
Isogeometric fluid-structure interaction: Theory, algorithms, and computations
Weak imposition of Dirichlet boundary conditions in fluid mechanics
Large eddy simulation of turbulent Taylor-Couette flow using isogeometric analysis and the residual-based variational multiscale method
A DRD finite element formulation for computing turbulent reacting flows in gas turbine combustors
Space-time fluid-structure interaction modeling of patient-specific cerebral aneurysms
Patient-specific arterial fluid-structure interaction modeling of cerebral aneurysms
A parallel 3D computational method for fluid-structure interactions in parachute systems
Mesh update strategies in parallel finite element computations of flow problems with moving boundaries and interfaces
Massively parallel finite element simulation of compressible and incompressible flows
Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly enforced boundary conditions on unstretched meshes
Fluid-structure interaction modeling of clusters of spacecraft parachutes with modified geometric porosity
A computational procedure for prebending of wind turbine blades
Space--time finite element computation of complex fluid--structure interactions
ALE and space-time variational multiscale isogeometric analysis of wind turbines and turbomachinery
High-performance computing of wind turbine aerodynamics using isogeometric analysis
Title not available (Why is that?)
Finite element methods for flow problems with moving boundaries and interfaces
A fully-coupled fluid-structure interaction simulation of cerebral aneurysms
Automatic mesh update with the solid-extension mesh moving technique
Using ALE-VMS to compute aerodynamic derivatives of bridge sections
Aorta zero-stress state modeling with T-spline discretization
Fluid-structure interaction simulation of pulsatile ventricular assist devices
FSI modeling of the Orion spacecraft drogue parachutes
A Geometrical-Characteristics Study in Patient-Specific FSI Analysis of Blood Flow in the Thoracic Aorta
Multiscale methods for gore curvature calculations from FSI modeling of spacecraft parachutes
Title not available (Why is that?)
Stabilization and discontinuity-capturing parameters for space-time flow computations with finite element and isogeometric discretizations
Space-time method for flow computations with slip interfaces and topology changes (ST-SI-TC)
Computational free-surface fluid-structure interaction with application to floating offshore wind turbines
Ram-air parachute structural and fluid mechanics computations with the space-time isogeometric analysis (ST-IGA)
Modeling of a hydraulic arresting gear using fluid-structure interaction and isogeometric analysis
Computational analysis of flow-driven string dynamics in turbomachinery
Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines

Cited In (14)

A variational multiscale immersed meshfree method for fluid structure interactive systems involving shock waves
Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. I: Computational framework
A surface moving mesh method based on equidistribution and alignment
Arbitrary mesh‐moving velocity‐based space‐time finite element method for large deformation analysis of solids
High-resolution 3D computation of time-periodic long-wake flows with the carrier-domain method and space-time variational multiscale method with isogeometric discretization
Model order reduction by convex displacement interpolation
Carrier-domain method for high-resolution computation of time-periodic long-wake flows
Space-time VMS isogeometric analysis of the Taylor-Couette flow
Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization
High-resolution multi-domain space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
Three-field partitioned analysis of fluid-structure interaction problems with a consistent interface model
Higher-continuity s-version of finite element method with B-Spline functions
Shape optimization of embedded solids using implicit vertex-morphing

Uses Software

SUPG

This page was built for publication: A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion

Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q2033642)