Space-time VMS method for flow computations with slip interfaces (ST-SI)
From MaRDI portal
Recommendations
- Space-time method for flow computations with slip interfaces and topology changes (ST-SI-TC)
- ALE-VMS and ST-VMS methods for computer modeling of wind-turbine rotor aerodynamics and fluid--structure interaction
- Engineering analysis and design with ALE-VMS and space-time methods
- Space-time VMS computation of wind-turbine rotor and tower aerodynamics
- Space–Time Flow Computation with Contact Between the Moving Solid Surfaces
Cites work
- 3D simulation of wind turbine rotors at full scale. II: Fluid--structure interaction modeling with composite blades
- 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
- A compressible Lagrangian framework for modeling the fluid-structure interaction in the underwater implosion of an aluminum cylinder
- A coupled PFEM-Eulerian approach for the solution of porous FSI problems
- A finite-element/boundary-element method for large-displacement fluid-structure interaction
- A fully-coupled fluid-structure interaction simulation of cerebral aneurysms
- A matrix-form GSM-CFD solver for incompressible fluids and its application to hemodynamics
- A moving-mesh gradient smoothing method for compressible CFD problems
- A multiscale/stabilized formulation of the incompressible Navier-Stokes equations for moving boundary flows and fluid-structure interaction
- A new strategy for finite element computations involving moving boundaries and interfaces --- The deforming-spatial-domain/space-time procedure. I: The concept and the preliminary numerical tests
- A new strategy for finite element computations involving moving boundaries and interfaces --- The deforming-spatial-domain/space-time procedure. II: Computation of free-surface flows, two-liquid flows, and flows with drifting cylinders
- A plug-and-play coupling approach for parallel multi-field simulations
- A unified monolithic approach for multi-fluid flows and fluid-structure interaction using the particle finite element method with fixed mesh
- Accurate fluid-structure interaction computations using elements without mid-side nodes
- Aerodynamic and FSI analysis of wind turbines with the ALE-VMS and ST-VMS methods
- ALE-VMS and ST-VMS methods for computer modeling of wind-turbine rotor aerodynamics and fluid--structure interaction
- CHALLENGES AND DIRECTIONS IN COMPUTATIONAL FLUID–STRUCTURE INTERACTION
- Computation of moving boundaries and interfaces and stabilization parameters
- Computation of residence time in the simulation of pulsatile ventricular assist devices
- Computational fluid-structure interaction. Methods and applications
- Computational fluid-structure interaction: methods and application to a total cavopulmonary connection
- Computational methods for parachute fluid-structure interactions
- Efficient numerical simulation of aeroacoustics for low Mach number flows interacting with structures
- Energy approach for static and linearized dynamic studies of elastic structures containing incompressible liquids with capillarity: a theoretical formulation
- Flow past two square cylinders with flexible splitter plates
- Flow simulation and high performance computing
- Fluid-structure interaction analysis of bioprosthetic heart valves: significance of arterial wall deformation
- Fluid-structure interaction modeling of wind turbines: simulating the full machine
- Fluid-structure interaction simulation of pulsatile ventricular assist devices
- Hydrodynamic interaction between two red blood cells in simple shear flow: its impact on the rheology of a semi-dilute suspension
- Immersed smoothed finite element method for fluid-structure interaction simulation of aortic valves
- Interaction of complex fluids and solids: theory, algorithms and application to phase-change-driven implosion
- Interface projection techniques for fluid-structure interaction modeling with moving-mesh methods
- Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
- Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
- Isogeometric fluid-structure interaction: Theory, algorithms, and computations
- Lagrangian-Eulerian finite element formulation for incompressible viscous flows
- Large eddy simulation of turbulent channel flows by the variational multiscale method
- Large eddy simulation of turbulent Taylor-Couette flow using isogeometric analysis and the residual-based variational multiscale method
- Mesh update strategies in parallel finite element computations of flow problems with moving boundaries and interfaces
- Methods for FSI modeling of spacecraft parachute dynamics and cover separation
- Modeling of fluid-structure interactions with the space-time techniques
- Modelling of fluid–structure interactions with the space–time finite elements: Solution techniques
- Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods
- Multiscale space-time fluid-structure interaction techniques
- Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
- NURBS-based isogeometric analysis for the computation of flows about rotating components
- On the coupling between fluid flow and mesh motion in the modelling of fluid-structure interaction
- On the Nonnormality of Subiteration for a Fluid-Structure-Interaction Problem
- Parallel BDD-based monolithic approach for acoustic fluid-structure interaction
- Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device
- Shape optimization of pulsatile ventricular assist devices using FSI to minimize thrombotic risk
- Space-time and ALE-VMS techniques for patient-specific cardiovascular fluid-structure interaction modeling
- Space-time computational analysis of bio-inspired flapping-wing aerodynamics of a micro aerial vehicle
- Space-time fluid mechanics computation of heart valve models
- Space-time fluid-structure interaction methods
- Space-time interface-tracking with topology change (ST-TC)
- Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
- Space-time VMS computation of wind-turbine rotor and tower aerodynamics
- Stabilized Finite Element Formulations for Incompressible Flow Computations
- Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
- STRUCTURAL MECHANICS MODELING AND FSI SIMULATION OF WIND TURBINES
- The shear-slip mesh update method
- Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
- Vibration of structures containing compressible liquids with surface tension and sloshing effects. Reduced-order model
- Weak imposition of Dirichlet boundary conditions in fluid mechanics
Cited in
(97)- Stabilization and discontinuity-capturing parameters for space-time flow computations with finite element and isogeometric discretizations
- Space-time method for flow computations with slip interfaces and topology changes (ST-SI-TC)
- Computational free-surface fluid-structure interaction with application to floating offshore wind turbines
- Computational analysis of wind-turbine blade rain erosion
- Flow analysis of a wave-energy air turbine with the SUPG/PSPG stabilization and discontinuity-capturing directional dissipation
- Ram-air parachute structural and fluid mechanics computations with the space-time isogeometric analysis (ST-IGA)
- Modeling of a hydraulic arresting gear using fluid-structure interaction and isogeometric analysis
- Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA)
- Computational analysis of flow-driven string dynamics in turbomachinery
- Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines
- FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow
- Heart valve flow computation with the integrated space-time VMS, slip interface, topology change and isogeometric discretization methods
- Space-time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method
- Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling
- The virtual ring shear-slip mesh update method
- A new formulation for air-blast fluid-structure interaction using an immersed approach. I: Basic methodology and FEM-based simulations
- Computational and experimental investigation of free vibration and flutter of bridge decks
- Turbocharger turbine and exhaust manifold flow computation with the space-time variational multiscale method and isogeometric analysis
- Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization
- Using ALE-VMS to compute aerodynamic derivatives of bridge sections
- The surrounding cell method based on the S-FEM for analysis of FSI problems dealing with an immersed solid
- Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine
- Medical-image-based aorta modeling with zero-stress-state estimation
- Stability and error estimates for the successive-projection technique with B-splines in time
- Gas turbine computational flow and structure analysis with isogeometric discretization and a complex-geometry mesh generation method
- A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion
- Machine learning for metal additive manufacturing: predicting temperature and melt pool fluid dynamics using physics-informed neural networks
- Space-time VMS isogeometric analysis of the Taylor-Couette flow
- Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
- Ventricle-valve-aorta flow analysis with the space-time isogeometric discretization and topology change
- Performance analysis of two vertical-axis hydrokinetic turbines using variational multiscale method
- The actuator line method for wind turbine modelling applied in a variational multiscale framework
- U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization
- Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle
- Space-time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film
- Element length calculation in B-spline meshes for complex geometries
- Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method
- Computational analysis of performance deterioration of a wind turbine blade strip subjected to environmental erosion
- Space-time computations in practical engineering applications: a summary of the 25-year history
- Tire aerodynamics with actual tire geometry, road contact and tire deformation
- Aorta zero-stress state modeling with T-spline discretization
- Anatomically realistic lumen motion representation in patient-specific space-time isogeometric flow analysis of coronary arteries with time-dependent medical-image data
- Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. I: Computational framework
- Wind turbine wake computation with the ST-VMS method, isogeometric discretization and multidomain method. II: Spatial and temporal resolution
- A numerical formulation for cavitating flows around marine propellers based on variational multiscale method
- High-resolution multi-domain space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
- T-splines computational membrane-cable structural mechanics with continuity and smoothness. I: Method and implementation
- Computational thermo-fluid analysis of a disk brake
- Flow analysis of a wave-energy air turbine with the SUPG/PSPG method and DCDD
- SUPG/PSPG computational analysis of rain erosion in wind-turbine blades
- New directions in space-time computational methods
- ALE-VMS and ST-VMS methods for computer modeling of wind-turbine rotor aerodynamics and fluid--structure interaction
- Computational cardiovascular analysis with the variational multiscale methods and isogeometric discretization
- ALE and space-time variational multiscale isogeometric analysis of wind turbines and turbomachinery
- Variational multiscale flow analysis in aerospace, energy and transportation technologies
- Engineering analysis and design with ALE-VMS and space-time methods
- Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries
- New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods
- Space-time VMS methods for modeling of incompressible flows at high Reynolds numbers
- Computational analysis methods for complex unsteady flow problems
- Methods for computation of flow-driven string dynamics in a pump and residence time
- Space-time isogeometric flow analysis with built-in Reynolds-equation limit
- Immersogeometric analysis of compressible flows with application to aerodynamic simulation of rotorcraft
- Modeling and simulation of bridge-section buffeting response in turbulent flow
- A stabilized ALE method for computational fluid-structure interaction analysis of passive morphing in turbomachinery
- Space–Time Flow Computation with Contact Between the Moving Solid Surfaces
- Space-time computational FSI and flow analysis: 2004 and beyond
- Porosity models and computational methods for compressible-flow aerodynamics of parachutes with geometric porosity
- Computational multi-phase convective conjugate heat transfer on overlapping meshes: a quasi-direct coupling approach via Schwarz alternating method
- Carrier-domain method for high-resolution computation of time-periodic long-wake flows
- Physics-informed machine learning for surrogate modeling of wind pressure and optimization of pressure sensor placement
- The surface‐reconstruction virtual‐region mesh update method for problems with topology changes
- Boundary layer mesh resolution in flow computation with the Space–Time Variational Multiscale method and isogeometric discretization
- Flow computation with the Space–Time Isogeometric Analysis and higher-order basis functions in time
- Isogeometric large-eddy simulations of turbulent particle-laden flows
- Isogeometric analysis in computation of complex-geometry flow problems with moving boundaries and interfaces
- Revealing aeroelastic effects on low-rise roof structures in turbulent winds via isogeometric fluid-structure interaction
- Model order reduction for deforming domain problems in a time‐continuous space‐time setting
- Variational multiscale method stabilization parameter calculated from the strain-rate tensor
- Space-time computational flow analysis: unconventional methods and first-ever solutions
- Space-time flow computation with boundary layer and contact representation: a 10-year history
- High-resolution 3D computation of time-periodic long-wake flows with the carrier-domain method and space-time variational multiscale method with isogeometric discretization
- A node-numbering-invariant directional length scale for simplex elements
- Local-length-scale calculation in T-splines meshes for complex geometries
- Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization
- Variational multiscale computational fluid-structure interaction analysis of wells turbine passive-adaptive blades
- Space-time isogeometric analysis of NREL 5MW wind turbine rotor and tower aerodynamics
- A chronological catalog of methods and solutions in the space-time computational flow analysis. II: Isogeometric analysis
- A chronological catalog of methods and solutions in the space-time computational flow analysis. I: Finite element analysis
- Space-time isogeometric analysis of tire aerodynamics with complex tread pattern, road contact, and tire deformation
- T-splines mesh generation for complex geometries: multipatch-NURBS to product-form-T-splines conversion
- T-splines mesh generation for complex geometries: spacecraft parachute aerodynamics
- Space-time isogeometric analysis of the aortic-valve to aorta flow with high-resolution boundary-layer representation
- Dirichlet-boundary stabilization in space-time computational analysis: derivation in 1D elastodynamics
- Computational analysis of particle-laden-airflow erosion and experimental verification
- A low-distortion mesh moving method based on fiber-reinforced hyperelasticity and optimized zero-stress state
- Variational multiscale framework for cavitating flows
This page was built for publication: Space-time VMS method for flow computations with slip interfaces (ST-SI)
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q3450725)
