Computational analysis methods for complex unsteady flow problems
From MaRDI portal
Recommendations
- New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods
- Variational multiscale methods for incompressible flows
- Advances in variational multiscale methods for turbulent flows
- Variational multiscale flow analysis in aerospace, energy and transportation technologies
- Computational cardiovascular analysis with the variational multiscale methods and isogeometric discretization
Cites work
- 3D simulation of wind turbine rotors at full scale. II: Fluid--structure interaction modeling with composite blades
- 3D simulation of wind turbine rotors at full scale. Part I: Geometry modeling and aerodynamics
- A comparison of outlet boundary treatments for prevention of backflow divergence with relevance to blood flow simulations
- A fully-coupled fluid-structure interaction simulation of cerebral aneurysms
- A Geometrical-Characteristics Study in Patient-Specific FSI Analysis of Blood Flow in the Thoracic Aorta
- A new finite element formulation for computational fluid dynamics. V: Circumventing the Babuška-Brezzi condition: A stable Petrov-Galerkin formulation of the Stokes problem accommodating equal-order interpolations
- A new variational multiscale formulation for stratified incompressible turbulent flows
- A parallel 3D computational method for fluid-structure interactions in parachute systems
- A Single Formula for the “Law of the Wall”
- A stabilized ALE method for computational fluid-structure interaction analysis of passive morphing in turbomachinery
- Aerodynamic and FSI analysis of wind turbines with the ALE-VMS and ST-VMS methods
- ALE-VMS and ST-VMS methods for computer modeling of wind-turbine rotor aerodynamics and fluid--structure interaction
- ALE-VMS formulation for stratified turbulent incompressible flows with applications
- An immersogeometric variational framework for fluid-structure interaction: application to bioprosthetic heart valves
- Binary-fluid–solid interaction based on the Navier–Stokes–Korteweg equations
- CHALLENGES AND DIRECTIONS IN COMPUTATIONAL FLUID–STRUCTURE INTERACTION
- Compressible flows on moving domains: stabilized methods, weakly enforced essential boundary conditions, sliding interfaces, and application to gas-turbine modeling
- Compressible-flow geometric-porosity modeling and spacecraft parachute computation with isogeometric discretization
- Computation of moving boundaries and interfaces and stabilization parameters
- Computation of residence time in the simulation of pulsatile ventricular assist devices
- Computational analysis of flow-driven string dynamics in turbomachinery
- Computational and experimental investigation of free vibration and flutter of bridge decks
- Computational fluid-structure interaction. Methods and applications
- Computational fluid-structure interaction: methods and application to a total cavopulmonary connection
- Computational free-surface fluid-structure interaction with application to floating offshore wind turbines
- Computational methods for parachute fluid-structure interactions
- Computational thermo-fluid analysis of a disk brake
- Computer modeling techniques for flapping-wing aerodynamics of a locust
- Dynamic and fluid-structure interaction simulations of bioprosthetic heart valves using parametric design with T-splines and Fung-type material models
- Engineering analysis and design with ALE-VMS and space-time methods
- Error estimates for projection-based dynamic augmented Lagrangian boundary condition enforcement, with application to fluid-structure interaction
- Finite element methods for first-order hyperbolic systems with particular emphasis on the compressible Euler equations
- Fluid-structure interaction analysis of bioprosthetic heart valves: significance of arterial wall deformation
- Fluid-structure interaction modeling of clusters of spacecraft parachutes with modified geometric porosity
- Fluid-structure interaction modeling of wind turbines: simulating the full machine
- Fluid-structure interaction simulation of pulsatile ventricular assist devices
- Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines
- Frontiers in computational fluid-structure interaction and flow simulation. Research from lead investigators under forty -- 2018
- FSI analysis of the blood flow and geometrical characteristics in the thoracic aorta
- FSI modeling of a propulsion system based on compliant hydrofoils in a tandem configuration
- FSI modeling of the Orion spacecraft drogue parachutes
- FSI simulation of two back-to-back wind turbines in atmospheric boundary layer flow
- Heart valve flow computation with the integrated space-time VMS, slip interface, topology change and isogeometric discretization methods
- High-performance computing of wind turbine aerodynamics using isogeometric analysis
- Immersogeometric analysis of compressible flows with application to aerodynamic simulation of rotorcraft
- Isogeometric analysis. Toward integration of CAD and FEA
- Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
- Isogeometric divergence-conforming variational multiscale formulation of incompressible turbulent flows
- Isogeometric fluid structure interaction analysis with emphasis on non-matching discretizations, and with application to wind turbines
- Isogeometric fluid-structure interaction analysis with applications to arterial blood flow
- Isogeometric fluid-structure interaction: Theory, algorithms, and computations
- Isogeometric variational multiscale modeling of wall-bounded turbulent flows with weakly enforced boundary conditions on unstretched meshes
- Lagrangian-Eulerian finite element formulation for incompressible viscous flows
- Large eddy simulation and the variational multiscale method
- Large eddy simulation of turbulent channel flows by the variational multiscale method
- Large eddy simulation of turbulent Taylor-Couette flow using isogeometric analysis and the residual-based variational multiscale method
- Large-eddy simulation with near-wall modeling using weakly enforced no-slip boundary conditions
- Mesh refinement influence and cardiac-cycle flow periodicity in aorta flow analysis with isogeometric discretization
- Methods for computation of flow-driven string dynamics in a pump and residence time
- Methods for FSI modeling of spacecraft parachute dynamics and cover separation
- Modeling and simulation of bridge-section buffeting response in turbulent flow
- Modeling of a hydraulic arresting gear using fluid-structure interaction and isogeometric analysis
- Modelling of fluid–structure interactions with the space–time finite elements: Solution techniques
- Multiscale methods for gore curvature calculations from FSI modeling of spacecraft parachutes
- Multiscale phenomena: Green's functions, the Dirichlet-to-Neumann formulation, subgrid scale models, bubbles and the origins of stabilized methods
- Multiscale space-time fluid-structure interaction techniques
- Multiscale space-time methods for thermo-fluid analysis of a ground vehicle and its tires
- New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods
- New directions in space-time computational methods
- Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
- Numerical-performance studies for the stabilized space-time computation of wind-turbine rotor aerodynamics
- NURBS-based isogeometric analysis for the computation of flows about rotating components
- Optimizing fluid-structure interaction systems with immersogeometric analysis and surrogate modeling: application to a hydraulic arresting gear
- Patient-specific computational analysis of the influence of a stent on the unsteady flow in cerebral aneurysms
- Patient-specific computer modeling of blood flow in cerebral arteries with aneurysm and stent
- Patient-specific isogeometric fluid-structure interaction analysis of thoracic aortic blood flow due to implantation of the Jarvik 2000 left ventricular assist device
- Porosity models and computational methods for compressible-flow aerodynamics of parachutes with geometric porosity
- Projection-based stabilization of interface Lagrange multipliers in immersogeometric fluid-thin structure interaction analysis, with application to heart valve modeling
- Ram-air parachute structural and fluid mechanics computations with the space-time isogeometric analysis (ST-IGA)
- Shape optimization of pulsatile ventricular assist devices using FSI to minimize thrombotic risk
- Space--time finite element computation of complex fluid--structure interactions
- Space-time and ALE-VMS techniques for patient-specific cardiovascular fluid-structure interaction modeling
- Space-time computational analysis of bio-inspired flapping-wing aerodynamics of a micro aerial vehicle
- Space-time computations in practical engineering applications: a summary of the 25-year history
- Space-time fluid mechanics computation of heart valve models
- Space-time fluid-structure interaction methods
- Space-time interface-tracking with topology change (ST-TC)
- Space-time isogeometric flow analysis with built-in Reynolds-equation limit
- Space-time method for flow computations with slip interfaces and topology changes (ST-SI-TC)
- Space-time techniques for computational aerodynamics modeling of flapping wings of an actual locust
- Space-time VMS computation of wind-turbine rotor and tower aerodynamics
- Space-time VMS computational flow analysis with isogeometric discretization and a general-purpose NURBS mesh generation method
- Space-time VMS method for flow computations with slip interfaces (ST-SI)
- Space-time VMS methods for modeling of incompressible flows at high Reynolds numbers
- ST and ALE-VMS methods for patient-specific cardiovascular fluid mechanics modeling
- Stabilized Finite Element Formulations for Incompressible Flow Computations
- Stabilized methods for compressible flows
- Stabilized space-time computation of wind-turbine rotor aerodynamics
- Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations
- STRUCTURAL MECHANICS MODELING AND FSI SIMULATION OF WIND TURBINES
- Tire aerodynamics with actual tire geometry, road contact and tire deformation
- Turbocharger flow computations with the space-time isogeometric analysis (ST-IGA)
- Turbocharger turbine and exhaust manifold flow computation with the space-time variational multiscale method and isogeometric analysis
- Using ALE-VMS to compute aerodynamic derivatives of bridge sections
- Variational multiscale residual-based turbulence modeling for large eddy simulation of incompressible flows
- Weak imposition of Dirichlet boundary conditions in fluid mechanics
Cited in
(30)- A numerical method for unsteady flows
- Space-time variational multiscale isogeometric analysis of a tsunami-shelter vertical-axis wind turbine
- A linear-elasticity-based mesh moving method with no cycle-to-cycle accumulated distortion
- Space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
- Ventricle-valve-aorta flow analysis with the space-time isogeometric discretization and topology change
- U-duct turbulent-flow computation with the ST-VMS method and isogeometric discretization
- Space-time VMS flow analysis of a turbocharger turbine with isogeometric discretization: computations with time-dependent and steady-inflow representations of the intake/exhaust cycle
- Space-time computational analysis of tire aerodynamics with actual geometry, road contact, tire deformation, road roughness and fluid film
- Element length calculation in B-spline meshes for complex geometries
- Heart valve isogeometric sequentially-coupled FSI analysis with the space-time topology change method
- High-resolution multi-domain space-time isogeometric analysis of car and tire aerodynamics with road contact and tire deformation and rotation
- Computational Aspects of Implicit LES of Complex Flows
- Variational multiscale flow analysis in aerospace, energy and transportation technologies
- Element-splitting-invariant local-length-scale calculation in B-Spline meshes for complex geometries
- New directions and challenging computations in fluid dynamics modeling with stabilized and multiscale methods
- Computational Techniques for Complex Transport Phenomena
- Computational multi-phase convective conjugate heat transfer on overlapping meshes: a quasi-direct coupling approach via Schwarz alternating method
- Carrier-domain method for high-resolution computation of time-periodic long-wake flows
- Physics-informed machine learning for surrogate modeling of wind pressure and optimization of pressure sensor placement
- Isogeometric discretization methods in computational fluid mechanics
- Boundary layer mesh resolution in flow computation with the Space–Time Variational Multiscale method and isogeometric discretization
- Flow computation with the Space–Time Isogeometric Analysis and higher-order basis functions in time
- Isogeometric large-eddy simulations of turbulent particle-laden flows
- Isogeometric analysis in computation of complex-geometry flow problems with moving boundaries and interfaces
- Revealing aeroelastic effects on low-rise roof structures in turbulent winds via isogeometric fluid-structure interaction
- Variational multiscale method stabilization parameter calculated from the strain-rate tensor
- A node-numbering-invariant directional length scale for simplex elements
- Local-length-scale calculation in T-splines meshes for complex geometries
- Computation of unsteady vortical flows
- A low-distortion mesh moving method based on fiber-reinforced hyperelasticity and optimized zero-stress state
This page was built for publication: Computational analysis methods for complex unsteady flow problems
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4972955)
