ANSYS

swMATH44WikidataQ14930378MaRDI QIDQ12817

No author found.

Related Items (only showing first 100 items - show all)

Variational analysis and aerospace engineering. Mathematical challenges for the aerospace of the future. Based on the presentations at the workshop, Erice, Italy, 2015 ⋮ Optimized implementation of the lattice Boltzmann method on a graphics processing unit towards real-time fluid simulation ⋮ Experience of validation and tuning of turbulence models as applied to the problem of boundary layer separation on a finite-width wedge ⋮ Numerical investigation of the aerodynamic and acoustical properties of a shrouded rotor ⋮ A one-dimensional higher-order theory with cubic distortional modes for static and dynamic analyses of thin-walled structures with rectangular hollow sections ⋮ Development of magnetorheological resistive exercise device for rowing machine ⋮ Modeling and analysis of piezoelectric beam with periodically variable cross-sections for vibration energy harvesting ⋮ On the consequences of the adoption of the Zaremba-Jaumann objective stress rate in FEM codes ⋮ Asymmetric free vibration of circular plate in contact with incompressible fluid ⋮ A `FE-meshfree' TRIA3 element based on partition of unity for linear and geometry nonlinear analyses ⋮ Pseudo-beam method for compressive buckling characteristics analysis of space inflatable load-carrying structures ⋮ Frictional Hertzian contact between a laterally graded elastic medium and a rigid circular stamp ⋮ Analytical solution to a mixed boundary value elastic problem of a roller-guided panel of laminated composite ⋮ Decoupled three-dimensional finite element computation of thermoelastic damping using Zener's approximation ⋮ BEM treatment of three-dimensional anisotropic field problems by direct domain mapping ⋮ Micron particle deposition in the nasal cavity using the \(v^2-f\) model ⋮ Forced vibration of helical rods of arbitrary shape ⋮ Simulating fire effects on complex building structures ⋮ Elasto-plastic buckling analysis for perforated steel plates subject to uniform compression ⋮ A novel singular finite element of mixed-mode crack problems with arbitrary crack tractions ⋮ On fracture testing of piezoelectric ceramics ⋮ Bi-interfacial debonding of coated fiber reinforced composites under fatigue load ⋮ The effect of material model in describing mechanism of plasticity-induced crack closure under variable cyclic loading ⋮ Design of reinforcement for concrete co-planar shell structures using optimization techniques ⋮ Optimization of an acoustic test chamber involving the fluid-structure interaction by FEM and experimental validation ⋮ Spatial aspects in the SMAD signaling pathway ⋮ Numerical and experimental characterizations of longitudinally polarized piezoelectric \(d_{15}\) shear macro-fiber composites ⋮ Well-posedness of a linear spatio-temporal model of the JAK2/STAT5 signaling pathway ⋮ A Krylov-Arnoldi reduced order modelling framework for efficient, fully coupled, structural-acoustic optimization ⋮ Sampling-based RBDO using the stochastic sensitivity analysis and dynamic kriging method ⋮ Evolutionary topology optimization of periodic composites for extremal magnetic permeability and electrical permittivity ⋮ Comparison study between probabilistic and possibilistic methods for problems under a lack of correlated input statistical information ⋮ Intelligent identification of underground powerhouse of pumped-storage power plant ⋮ Finite element analysis of elasto-plastic plate bending problems using transition rectangular plate elements ⋮ Computational fluid dynamics modelling of ultra-lean porous burners ⋮ Turbulence model analysis of flow inside a hydrocyclone ⋮ Design and optimization of an XYZ parallel micromanipulator with flexure hinges ⋮ Induced electromagnetic stirring behavior in a resistance spot weld nugget ⋮ The effects of shock wave and quasi-traveling wave in the mechanical impact test ⋮ Finite element method based design and optimisation methodology for piezoelectric ultrasonic motors ⋮ Hybrid algorithm for modeling of fluid-structure interaction in incompressible, viscous flows ⋮ Effect of modeling method on prediction of cortical bone strength adaptation under various loading conditions ⋮ Shape optimal design of materially nonlinear arch dams including dam-water-foundation rock interaction using an improved PSO algorithm ⋮ A review of adhesion mechanisms of mushroom-shaped microstructured adhesives ⋮ Cylindrical nano-indentation on metal film/elastic substrate system with discrete dislocation plasticity analysis: a simple model for nano-indentation size effect ⋮ Computation of thermal fracture parameters for orthotropic functionally graded materials using \(J_k\)-integral ⋮ Stress state analysis of harmonic drive elements by FEM ⋮ FEM for stability analysis against overturning of portal water injection sheet pile ⋮ Nonlinear thermal analysis of multi-holed lightweight concrete blocks used in external and non-habitable floors by FEM ⋮ Analytical behavior prediction for skewed thick plates on elastic foundation ⋮ Nonlinear analysis and calculation of the performance of a shelving protection system by FEM ⋮ Simulation process of flexible multibody systems with non-modal model order reduction techniques ⋮ Nonparametric gradient-less shape optimization for real-world applications ⋮ Estimate of the effectiveness of the circular element in BEM and FEM ⋮ A new optimality criteria method for shape optimization of natural frequency problems ⋮ Numerical investigations on dynamic stall of low Reynolds number flow around oscillating airfoils ⋮ Non-linear thermal analysis of the efficiency of light concrete multi-holed bricks with large recesses by FEM ⋮ Semi-exact solution for thermo-mechanical analysis of functionally graded elastic-strain hardening rotating disks ⋮ Retracted article: Free vibrations of laminated composite doubly-curved shells and panels of revolution via the GDQ method ⋮ New approximations of external acoustic-structural interactions: derivation and evaluation ⋮ Hygrothermal fracture analysis of orthotropic functionally graded materials using \(J_k\)-integral-based methods ⋮ Large-eddy simulation of thermal striping in unsteady non-isothermal triple jet ⋮ Effect of the laminar separation bubble induced transition on the hydrodynamic performance of a hydrofoil ⋮ Filtered density function simulator on unstructured meshes ⋮ Mathematical modeling of jet interaction with a high-enthalpy flow in an expanding channel ⋮ Nonstationary hemodynamics modelling in a cerebral aneurysm of a blood vessel ⋮ Hybrid high dimensional model representation for reliability analysis ⋮ Modeling the electrostatic deflection of a MEMS multilayers based actuator ⋮ User defined finite element for modeling and analysis of active piezoelectric shell structures ⋮ A partition-of-unity based `FE-meshfree' QUAD4 element with radial-polynomial basis functions for static analyses ⋮ Modal effective electromechanical coupling approximate evaluations and simplified analyses: numerical and experimental assessments ⋮ Analysis of fatigue delamination growth in flip-chip package ⋮ Analysis of thermal stress intensity factors for cracked cylinders using weight function method ⋮ On the air cleansing efficiency of an extended green wall: a CFD analysis of mechanistic details of transport processes ⋮ A modification of the rigid finite element method and its application to the J-lay problem ⋮ Reduced order model for the lift coefficient of an airfoil equipped with extrados and/or trailing edge flexible flaps ⋮ Development and validation of a coupled Navier-Stokes/DSMC simulation for rarefied gas flow in the production process for oleds ⋮ A generalized theory of stress and strain measures in the classical continuum mechanics ⋮ Non-conservative problems of Leipholz's composite beams considering shear deformation and rotary inertia effects ⋮ An engineering model for the penetration of a rigid-rod into a Cowper-Symonds low-strength material ⋮ A layerwise beam element for analysis of frames with laminated sections and flexible joints ⋮ GPU acceleration for FEM-based structural analysis ⋮ Neglected transport equations: extended Rankine-Hugoniot conditions and \(J\)-integrals for fracture ⋮ Eigenoscillations of a thin-walled azimuthally closed, axially open shell of revolution ⋮ Numerical study of bifurcating flow through sudden expansions: effect of divergence and geometric asymmetry ⋮ Analytical and finite-element study of optimal strain distribution in various beam shapes for energy harvesting applications ⋮ Application of bacterial colony chemotaxis optimization algorithm and RBF neural network in thermal NDT/E for the identification of defect parameters ⋮ Solution of large deformation contact problems with friction between Blatz-Ko hyperelastic bodies ⋮ Two-dimensional elasticity solution for transient response of simply supported beams under moving loads ⋮ A Cosserat point element (CPE) for nearly planar problems (including thickness changes) in nonlinear elasticity ⋮ Three-dimensional mixed-mode stress intensity factors for cracks in functionally graded materials using enriched finite elements ⋮ Locating damage in circular cylindrical composite shells based on frequency sensitivities and mode shapes ⋮ Numerical investigation of the load capacity of a gas journal bearing of finite length with end seals ⋮ Buckling of an orthotropic graded coating with an embedded crack bonded to a homogeneous substrate ⋮ Parallel direct Poisson solver for discretisations with one Fourier diagonalisable direction ⋮ Teaching multibody dynamics at Warsaw University of Technology ⋮ A numerical study of algebraic flux models for heat and mass transport simulation in complex flows ⋮ Mode II weight functions for isotropic and orthotropic double cantilever beams ⋮ Self-driven tunneling crack arrays -- a 3D-fracture mechanics bifurcation analysis ⋮ Optimality criteria: A basis for multidisciplinary design optimization

This page was built for software: ANSYS