Mixed Mode Cracking in Layered Materials
From MaRDI portal
Publication:4013294
Recommendations
- scientific article; zbMATH DE number 5841238
- Crack tunneling and plane-strain delamination in layered solids
- Cracking in thin multi-layers with finite-width and periodic architectures.
- Fracture mechanics of multilayered shells. Theory of delamination cracks
- scientific article; zbMATH DE number 3980689
Cited in
(only showing first 100 items - show all)- A phase-field approach to model fracture of arterial walls: theory and finite element analysis
- Mechanics of tunnelling cracks in trilayer elastic materials in tension
- Effect of a transverse electric field on crack kinking in ferroelectric ceramics
- Nonlinear fracture dynamic analysis of double cantilever beam sandwich specimens
- Analysis of hollow inclusion-matrix debonding in particulate composites
- Peeling behavior of a bio-inspired nano-film on a substrate
- Two adhesive-contact models for quasistatic mixed-mode delamination problems
- Finite element simulation of stress intensity factors in elastic plastic crack growth
- A unified model for stress-driven rearrangement instabilities
- Application of bimaterial interface corner failure mechanics to silicon/glass anodic bonds
- An analysis of the delamination of an environmental protection coating under cyclic heat loads
- Buckling delamination of a rectangular plate containing a rectangular crack and made from elastic and viscoelastic composite materials
- Variational phase-field fracture modeling with interfaces
- A finite element analysis of configurational stability and finite growth of buckling driven delamination
- Buckling-driven delamination in layered spherical shells
- Evaluation of fracture mechanics parameters for free edges in multi-layered structures with weak singularities
- Investigating propagation path of interface crack by the field-enriched finite element method
- Crack tunneling and plane-strain delamination in layered solids
- Interface behavior of a bi-material plate under dynamic loading. Cohesive interface debonding
- Numerical homogenization of cracking processes in thin fibre-epoxy layers
- Dynamic crack deflection and penetration at interfaces in homogeneous materials: Experimental studies and model predictions
- Cracking in thin multi-layers with finite-width and periodic architectures.
- An approximate solution for toughness-dominated near-surface hydraulic fractures
- Plane stress near-tip field analysis of steady-state crack growth along a linear-hardening elastic-plastic interface
- On the fracture resistance of adhesively jointing structures
- Numerical studies on crack problems in three-layered elastic media using an image method
- The energy release rate of mode II fractures in layered snow samples
- Tunneling cracks in the adhesive layer of an orthotropic sandwich structure
- Deflection criterion of a crack approaching a bi-material interface obliquely
- Fracture mechanics of multilayered shells. Theory of delamination cracks
- Wrinkling of a charged elastic film on a viscous layer
- A method to extract interface stress intensity factors for bimaterial problems using interlayers
- Elliptical adhesive contact under biaxial stretching
- A micromechanical basis for partitioning the evolution of grain bridging in brittle materials
- Thermoelastic analysis of a cracked orthotropic strip under heat conduction effect of crack interior
- Crack paths and the problem of global directional stability
- Self-driven tunneling crack arrays -- a 3D-fracture mechanics bifurcation analysis
- T-stress of a bi-material strip under generalized edge loads
- Buckling delamination in compressed multilayers on curved substrates with accompanying ridge cracks
- Modelling of bonded multilayered disks subjected to biaxial flexure tests
- Dynamic crack growth along an elastoplastic bimaterial interface
- Vapor pressure and residual stress effects on mixed mode toughness of an adhesive film
- On the toughening of brittle materials by grain bridging: promoting intergranular fracture through grain angle, strength, and toughness
- A wedge crack in an anisotropic material under antiplane shear
- Evaluation of stress intensity factors for bi-material interface cracks using displacement jump methods
- A novel variable power singular element in G space with strain smoothing for bi-material fracture analyses
- Delamination of compressed films on curved substrates
- Transient dynamic interface crack analysis in magnetoelectroelastic bi-materials by a time-domain BEM
- An opening crack model for thermopiezoelectric solids
- Interface delamination of bi-material structure under dynamic time harmonic loading
- Analysis on cohesive crack opening displacement considering the strain softening effect
- Evaluation of mechanical parameters of an elastic thin film system by modeling and numerical simulation of telephone cord buckles
- Wrinkling of the oxide scale on an aluminum-containing alloy at high temperatures
- Local-solution approach to quasistatic rate-independent mixed-mode delamination
- Delamination of compressed thin layers at corners
- Nonlinear fracture mechanics of flexural-shear crack induced debonding of FRP strengthened concrete beams
- An exact theory of interfacial debonding in layered elastic composites
- Using a cohesive damage model to predict the tensile behaviour of CFRP single-strap repairs
- On semi-infinite interface crack in bi-material elastic layer
- Rate and state dependent friction and the stability of sliding between elastically deformable solids
- In-situ characterization of interface delamination by a new miniature mixed mode bending setup
- Interface crack onset at a circular cylindrical inclusion under a remote transverse tension. Application of a coupled stress and energy criterion
- Mixed-mode singularity and temperature effects on dislocation nucleation in strained interconnects
- Stress intensity factors for an interface kinked crack in a bi-material plate loaded normal to the interface
- Progressive frictional delamination of an infinite elastic film on a rigid substrate due to in-plane point loading
- Investigation of mixed-mode stress intensity factors for nonhomogeneous materials using an interaction integral method
- A mixed-mode phase field fracture model in anisotropic rocks with consistent kinematics
- Free-edge stresses and progressive cracking in surface coatings of circular torsion bars
- Energetic versus maximally-dissipative local solutions of a quasi-static rate-independent mixed-mode delamination model
- The roles of toughness and cohesive strength on crack deflection at interfaces
- The morphology and folding patterns of buckling-driven thin-film blisters
- Mathematical modeling and numerical simulation of telephone cord buckles of elastic films
- ENERGY RELEASE RATE OF INTERFACE DELAMINATION BETWEEN A THIN COATING AND AN ELASTIC SUBSTRATE
- Edge delamination in an orthotropic bimaterial consisting of a thin film and a substrate
- Strength scaling of adhesive joints in polymer-matrix composites
- Evaluation of mixed mode stress intensity factors for interface cracks using EFGM
- Steady-state mode III delamination crack in a periodically layered medium
- Inhomogeneity effects on the crack driving force in elastic and elastic--plastic materials.
- Stress intensity factor for a kinked interfacial crack in dissimilar anisotropic materials under antiplane deformation
- Effect of elastic constants on crack channeling in a thin film bonded to an orthotropic substrate
- Application of an orthotropy rescaling method to edge cracks and kinked cracks in orthotropic two-dimensional solids
- Multiscale Modelling of the Failure Behaviour of Fibre-Reinforced Laminates
- An enhanced beam-theory model of the mixed-mode bending (MMB) test. II: Applications and results
- Fatigue crack growth simulations of homogeneous and bi-material interfacial cracks using element free Galerkin method
- Laws of crack motion and phase-field models of fracture
- On the calculation of energy release rates for cracked laminates with residual stresses
- Analysis of vertical cracking phenomena in tensile-strained epitaxial film on a substrate. II. Application to inxga1 - xas/InP system
- Micron-scale channel formation by the release and Bond-back of pre-stressed thin films: a finite element analysis
- A generalized Weibull approach to interface failure in bi-material ceramic joints
- Adhesive lap-joints: a micro-scale numerical investigation
- Elastic thermal stresses in a circular overlay/rigid substrate system
- Mode-dependent toughness and the delamination of compressed thin films
- High-fidelity simulations of multiple fracture processes in a laminated composite in tension
- Periodic cracking of films supported on compliant substrates
- Nonlinear analyses of wrinkles in a film bonded to a compliant substrate
- Stress singularities in a periodically layered composite with a transverse rigid line inclusion
- Influence of interfacial delamination on channel cracking of elastic thin films
- A thermomechanical fracture modeling and simulation for functionally graded solids using a residual-strain formulation
- An explicit elastic solution for a brittle film with periodic cracks
- Interface microcrack nucleation
This page was built for publication: Mixed Mode Cracking in Layered Materials
Report a bug (only for logged in users!)Click here to report a bug for this page (MaRDI item Q4013294)
